复杂深井尾管固井及回接技术实践

尾管悬挂固井是一种工程经济效益较高、注水泥环空阻力较低且有利于改善套管柱轴向设计和再钻进水力条件的固井方法，常常应用于深井超深井的固井作业。鄯科1井是一口科学探索井，完井尾管具有井径极不规则（实测井径扩大率最大为139.82%，最小为－6.02%）、施工压力高（15~20 MPa）、封固段长（考虑水泥余量的情况下封固段可长达1500 m）和尾管回接固井要求封固两头且不使用分级注水泥等难点。文章针对固井难点，总结出一套适用于复杂深井尾管及其回接固井的优化设计关键技术，它主要包括管串选择、套管扶正器加法、水泥浆体系优选、施工压力校核和配套工艺措施。实践证明，这些技术对类似井的固井作业具有实际的参考价值。     

用分解法编制轴类零件图程序

采用分解法编写轴类零件程序，即将具有典型结构的轴分解成若干部分，把每一部分编成通用子程序，连同尺寸标注子程序、表面粗糙度子程序、剖面线子程序、尺寸公差及形位公差子程序等一并存贮在程序库中，需要时一一调用。     

长垣东部深井井壁失稳及技术对策

大庆油田在长垣东部深层油气田勘探开发过程中存在井眼不稳定问题。在对深层失稳井段资料调研的基础上，开展了易塌地层泥页岩水化膨胀及分散特性评价以及比亲水量研究。通过泥页岩--试液模拟作用的化学位差反渗透实验以及压力传递实验等，探讨了不同条件下泥页岩水化应力变化规律。利用井壁稳定性模拟实验装置（SHM仪），评价了不同钻井液防塌效果。理论分析和实验表明，当使用水基钻井液在复杂泥页岩地层钻进时，如何控制泥页岩压力传递和流体侵入是解决泥页岩井壁不稳的技术关键。使用长垣东部深层泥页岩与硅酸盐钻井液作用的实验表明，硅酸盐钻井液能显著降低泥岩渗透率，阻止钻井液滤液与孔隙压力的传递，改善膜效率，有助于充分发挥化学位差诱导的反渗透防塌作用效果。     

An application of expert systems techniques to the on-line control and fault diagnosis of a mixing process

An application of expert hierarchical control is described in this paper. The control is implemented in a two-level configuration, where the lower layer performs direct regulation control and the upper layer performs supervisory functions. In the regulation layer, a rule-based controller performs the regulation task, where the controller is constructed upon causal relations between subsystems. The control action is inferred from the measurement of both controlled and noncontrolled variables. In the supervisory layer, the main function is a fault diagnosis system which diagnoses faults on-line. The diagnosis is based upon reasoning from the structure of the system and the functions of its components, and efficient diagnosis is achieved by dividing the system into several subsystems. The overall technique has been successfully implemented on a pilot scale mixing process under on-line computer control.     

拉普拉斯变换的图形分析

以单边指数函数为例，分析了拉普拉斯变换象函数F(s)在其收敛域内随σ和ω的变化规律，通过|F(s)|曲面图来观察这些规律，并解释了图中某些特定点及剖面的含义，以形象化的方式加深对拉普拉斯变换的认识。借助MATLAB的绘图功能绘制出F(s)的曲面图、剖面图及信号的频谱图，从中可以观察到频域与复频域的关系以及系统函数的零极点分布等。     

震源延迟叠加技术及应用效果

延迟叠加爆炸是针对高分辨率和深层地震勘探而提出来的一种激发方式。这种激发方式能在保证地震分辨率的前提下有效提高地震波能量 ,在地震波的入射角范围内 ,有效克服非球形炸药激发引起的地震波传播的方向性。应用弹性波动力学对多级延迟爆炸进行理论研究 ,结合实际试验资料 ,研究了延迟爆炸情况下激发参数对地震波能量、主频、频宽等的影响。从几何地震学出发 ,分析了不同时间激发的地震波在地下空间中的干涉情况 ,对其能量传播的方向性进行了研究。理论分析和试验效果表明 ,延迟叠加震源与相同药量的普通震源相比 ,激发地震波的主频高 ,频带宽 ,增强了下传能量 ,降低了次生干扰 ,在高分辨率和深层地震勘探中具有明显的优势。     

Concast连铸机自控系统简介

天津钢铁有限公司引进了瑞士Concast公司6机6流方、圆坯连铸机及相关技术，文章简要介绍了Concast连铸机的自动控制系统的特点和功能。     

土钉支护在深基坑开挖中的应用

深圳某银行办公楼的深基坑支护采用了土钉支护，不但保证了施工质量，而且缩短了工期，减少了投资，以此工程为例介绍了土钉支护的土力学参数计算、结构设计、施工方案、技术措施和取得的显著效果。     

Empirical modelling of shear strength of RC deep beams by genetic programming

This paper investigates the feasibility of using genetic programming (GP) to create an empirical model for the complicated non-linear relationship between various input parameters associated with reinforced concrete (RC) deep beams and their ultimate shear strength. GP is a relatively new form of artificial intelligence, and is based on the ideas of Darwinian theory of evolution and genetics. The size and structural complexity of the empirical model are not specified in advance, but these characteristics evolve as part of the prediction. The engineering knowledge on RC deep beams is also included in the search process through the use of appropriate mathematical functions.The model produced by GP is constructed directly from a set of experimental results available in the literature. The validity of the obtained model is examined by comparing its response with the shear strength of the training and other additional datasets. The developed model is then used to study the relationships between the shear strength and different influencing parameters. The predictions obtained from GP agree well with experimental observations.     

Structure and processability of iodinated poly(vinyl alcohol). IV. Drawability of the films iodinated at solution before casting

The drawability of iodinated at solution before casting (IBC) polyvinyl alcohol films prepared by casting aqueous solutions of 10 wt % PVA containing 15.2, 39.8, 83.2, 117.0, and 140.1% was examined with a tensile tester at 20–60°C. The tensile behavior of IBC films showed that the yield and breaking loads were much lower, and the breaking elongation was even higher than those of the unoriented iodinated after casting (IAC) films as well as the untreated PVA films. The maximum draw ratios of the films with the weight gain of 15.2, 39.8, 83.2, 117, and 140.1% were 4.5, 5.5, 8.5, 8.0, and 7.5, respectively, which were achieved at 20°C in all. The crystallinity of all films increased by the maximum draw, regardless of crystallinity before drawing. The crystalline structure was recovered to the original PVA crystalline lattice by deiodination. Amorphous orientation and initial moduli increased with the maximum draw ratio, while the orientation of crystals was constant. The orientation and moduli increased up to the weight gain of 83.2%, whose highest draw ratio and initial modulus were 8.5 and of 7.1 GPa, respectively, and then decreased. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008