Effect of additives on formation of natural gas hydrate

The formation of natural gas hydrate (NGH) is studied in this work. Kinetics data of hydrate formation with no agitation were collected at various concentrations of the aqueous solutions with different additives such as alkylpolyglucside, sodium dodecyl benzene sulfonate and potassium oxalate monohydrate. Various kinds of additive increased the formation rates of NGH and its storage capacity and reduced the induction time of NGH formation. Moreover, the storage capacity, the induction time and the hydrate formation rate were influenced by the concentration of the aqueous solution.     

Electrodeposition of catalytically active nickel for the oxygen evolution reaction — effects of anionic composition

Nickel electrodes were prepared by electrodeposition in electrolytes of various anionic compositions. The deposition conditions and bath types were evaluated with special emphasis on the electrocatalytic properties for the oxygen evolution reaction (OER). Electrochemical characterizations in a 5 mol/L KOH solution at 25°C showed that the electrode deposited from the chloride bath, having a low Tafel slope of 50 mV/dec and an overpotential of 396 mV at 100 mA/cm², is the most catalytically active among electrodes prepared in electrolytes of various anionic compositions. The electrode activity for the OER is related to the real surface areas, which depend on the anion compositions in the deposition bath and the deposition conditions.     

Chemistry of hydrogen sulphide under coal liquefaction conditions: 1. Modelling hydrogen transfer catalysis

The work reported here represents initial attempts to develop a complete kinetic and mechanistic understanding of the reaction chemistry of H₂S under coal liquefaction conditions, using both model systems and coal. Hydrogen sulphide was found to promote/catalyse the transfer of hydrogen from tetralin to 2-hydroxyquinoline (2-HOQ). The presence of H₂S can increase the rate of hydrogen transfer from tetralin to 2-HOQ by a factor of 10 compared with the same reaction run in the absence of H₂S. The energy of activation for hydrogen transfer was found to decrease by ≈5 kcal mol⁻¹ in the presence of H₂S. The presence of H₂S was also found to promote loss of oxygen from 2-HOQ to form small amounts of quinoline. No evidence of CC or CN bond cleavage in 2-HOQ was noted under any of the reaction conditions studied. These results suggest that the presence of H₂S reduces the temperatures necessary to promote effective hydrogen transfer from tetralin by 50–75 °C. Moreover, they imply that similar effects occur in H₂S-promoted coal liquefaction.     

gHRV: Heart rate variability analysis made easy

In this paper, the gHRV software tool is presented. It is a simple, free and portable tool developed in python for analysing heart rate variability. It includes a graphical user interface and it can import files in multiple formats, analyse time intervals in the signal, test statistical significance and export the results.     

Planar and axially symmetric slow shearing granular flows: a comparative evaluation of assembly evolution incorporating wavelet transforms

We demonstrate the enhanced capacities of our analysis toolset for three-dimensional data. In particular, we provide supporting evidence for some of the conclusions reached in our previous studies of two-dimensional avalanching heaps. Segregation by self-diffusion is shown to take place in three-dimensional assemblies and self-diffusion velocities are shown to be of a comparable order of magnitude to those found in plane-strain situations. The effect on assembly evolution by discrete avalanching of the availability of a third dimension for translation is investigated. The discrete wavelet transform is again shown to be a useful component of the toolset in coupling process variables in the context of the discrete defining events associated with assembly evolution. In particular, we move towards the determination of time constants by correlating wavelet coefficients with a time shift.     

Failure load prediction of structural adhesive joints : Part 2: Experimental study

The objective of this study was to determine how the fracture of adhesive joints depends on elastic beam parameters describing the adherends and the applied loads. The basic specimen geometry was the cracked lap shear joint constructed of aluminium alloy with various adherend and bondline thicknesses. Loads were applied in different combinations of bending, tension and shear to generate a failure envelope for each adhesive and specimen geometry. It was found that crack propagation for precracked specimens occured at a critical strain energy release rate but was also a function of the G_I/G_II ratio and the bondline thickness. The experiments also showed that the loads required to propagate a crack in a precracked specimen were always lower than the loads required to break the fillet. Hence, by treating uncracked joints as being cracked, where the fictitious crack tip is assumed to coincide with the location of the fillet, a conservative estimate of the failure load is obtained.     

Fluor SOx净化工艺--为俄罗斯绿色环境开发的将SO2转化为元素硫的经济技术

Fluor公司开发的Fluor SO_2净化工艺具有广泛多样的工艺布局,可以通过经济的方式定制脱除烟气中的有害组成。该工艺几乎能去除全部SO_2并减少CO排放。Fluor SO_x净化工艺的主要步骤已在多套工业装置中得到成功的证实。除技术可行、经济合理之外,Fluor SO_x净化工艺不会产生任何有害副产物,也不会遇到与SO_3 有关的腐蚀问题。此外,该工艺生产高纯度可市售的元素硫。论述了Fluor SO_x净化工艺的特征、技术和成本优势、设计和操作的简易性以及实施的便利性。     

The influence of F doping on the activity of PbO2 film electrodes in oxygen evolution reaction

The PbO₂ and F⁻-doped PbO₂ (F-PbO₂) film electrodes have been prepared by an electrodeposition process onto platinum substrate. The changes of their electrochemical activity for oxygen evolution (OE) reaction with accelerated electrolysis time have been studied. The results show that the activity of the electrodes decreases with increasing electrolysis time. This can be attributed to the conductivity variations, which are caused by the decrease of the oxygen vacancy concentration in PbO₂ films during OE. The mechanism of the decrease of the oxygen vacancies has been investigated. For F-PbO₂ film electrodes, though its electrochemical activity is somewhat lower than that of undoped one, its activity stability is much higher in comparison with that of PbO₂. The influence of F⁻ doping on the activity of PbO₂ film electrodes has been also discussed.     

In-situ monitoring of the stabilization with hydrogen of free radicals thermally induced from coal using high pressure e.s.r., d.t.a. and p.d.a. equipment

High temperature, high pressure e.s.r. measurements of the hydrogenation reaction of Taiheiyo coal in the presence of catalysts were carried out to understand the stabilization of thermally and/or catalytically induced free radicals. A decrease in free radical concentration with increasing temperature was observed for ZnCl₂ and SnCl₂ · 2H₂O catalysts at 10MPa under hydrogen gas. High pressure modified single-cell d.t.a. and p.d.a. equipment augmented the uniquely designed high temperature, high pressure e.s.r. cell. The hydrogenation reaction was monitored under the same experimental conditions as for e.s.r. From the results of the combination of high temperature, high pressure e.s.r. with high pressure d.t.a. and p.d.a., it was established that H₂ molecules can react efficiently with free radicals from coal molecules created by the presence of ZnCl₂ and SnCl₂ · 2H₂O catalysts.     

SOLUBILITY OF CO2 AND H2S IN A HINDERED AMINE SOLUTION

The solubility of H₂S and CO₂ in aqueous solutions of the sterically hindered amine, 2-amino-2-methyl-1-propanol (AMP), was determined at 40 and 100°C. Partial pressures of C)₂ ranged from approximately 2 to 6000 kPa and of H₂S from 2 to 2200 kPa. The solubility results were compared with previously reported acid gas solubilities in aqueous monoethanolamine (MEA) solutions.