医用药剂中可见异物自动化检测研究

针对国内人工药品检测的低效率、低准确率的不足,文章介绍了一套根据国家行业标准设计的基于智能机器视觉的可见异物自动化检测系统。该系统主要包括机械传动模块、电气控制模块、图像识别与处理模块。根据异物运动连续性和噪声运动无序性等特点,提出了改进的三次差分和能量累积算法来提取运动杂质,然后采用基于基于SIFT特征匹配和最邻近匹配的目标跟踪算法对杂质进行跟踪,获取杂质的大小和数目并分析出杂质总类,最后检测出杂质情况。最后把检测结果与国家标准进行比对,判断出该药剂是否合格。测试表明,系统的检测准确率达90%以上,满足企业要求,基本能替代人工检测。     

铜冶炼企业产品质量控制的探索与实践

为了保持阴极铜化学成分和质量长期稳定,某铜冶炼企业对阴极铜化学成分进行监控,对铜冶炼生产系统中电解工序物料、产出后又重回本系统物料、贵金属系统中产出物料、外购原料中物料的杂质总量进行分析,提出了减少杂质对阴极铜质量影响的措施,为阴极铜质量的稳定创造了良好的生产条件,并提升了企业适应复杂原料市场的能力。     

扫描电镜在质量事故分析中的应用

应用扫描电镜断口分析、能谱定性分析、光学显微形貌测试等方法 ,针对公司重要产品因细小裂纹而连续四炉产品全部报废的重大质量事故 ,分析了引起报废裂纹缺陷的性质及产生原因。结果表明 :缺陷主要是大量集聚分布的脆性Al2 O3 夹杂及其裂纹 ,属原材料缺陷 ,是冶炼时氧化还原工艺控制不当 ,或加Al量不均匀所致。据此立即采用了相应调整和改进冶炼工艺措施 ,有效消除了原始缺陷 ,迅速提高了产品质量和效益。     

结晶法提纯在高纯镓生产中的应用

目前镓提纯方法多采用电解法。单一电解法提纯镓．由于一些主要杂质析出严重，常常形成个别杂质元素超标，造成产品品级降低。本项目通过对电解尾料结晶法镓提纯新方法的研究，进一步补充完善提纯工艺路线，提高产品质量的稳定性。将该方法与湿法提纯技术相联合．可以提高产品产出率，降低生产成本。     

金属锑中微量杂质的光谱测定

利用直接光谱法测定锑中Ａｓ、Ｃｏ、Ｂｉ、Ｐｂ、Ｃｒ、Ｓｎ、Ｍｇ、Ｆｅ、Ａｌ、Ｎｉ、Ｃｄ、Ｃｕ、Ｚｎ、Ａｇ等微量杂质，选择石墨粉作为缓冲剂，改善了谱线的重复性，对样品处理进行了详细的分析研究，以最佳的光谱测定条件，使元素测定下限达到３×１０－４％─３×１０－３％，相对误差在２２％以内，为金属锑纯度的全面分析建立了可靠的分析方法。     

配制铝合金用的Zn锭中杂质Cd和Fe的光电分析法

介绍了用DV-4光电光谱仪分析配制铝合金用的Zn锭中杂质Cd、Fe的试验研究过程和分析规程。     

用生产废液回收钽制备氟钽酸钾除钨工艺研究

为了从湿法冶金生产钽、铌废液中回收Ta,先用石灰乳对生产废液进行前期处理，获得含7％～12％Ta的磷石灰渣．然后将其在HF-H2SO14-MIBK体系中萃取，得到钨杂质含量高的K2TaF7最后采用重结晶法对K2Taf7进行提纯。结果表明，用HF＋HNO3作溶剂，加热温度在90℃左右，固液比为1：14，重结晶提纯高钨K2TaF7钨杂质含量达到10μg．g^-1，符合生产高比容钽粉用K2TaF7允许钨杂质含量要求。     

Oxygen transport in ferrite-based ceramic membranes: Effects of alumina sintering aid

Moderate additions of Al₂O₃ to strontium ferrite-based mixed conductors, such as SrFe_0.7Al_0.3O_3−δ and La_0.2Sr_0.8Fe_0.8Ga_0.2O_3−δ with the composition close to the solid solution formation limits, make it possible to improve ceramics sinterability, to increase oxygen permeability and to decrease thermal expansion. These effects are associated with the segregation of alumina-rich phases, primarily SrAl₂O₄, and the formation of A-site cation-deficient perovskite. The improved properties of the SrFe_0.7Al_0.3O₃-based material were used to fabricate high-quality tubular membranes for methane conversion reactors. Similar enhancement in sinterability is also observed for another promising parent material of mixed-conducting membranes, La_0.5Sr_0.5FeO_3−δ. However, extensive dissolution of Al³⁺ cations in the iron sublattice, creation of A-site vacancies and changing the La:Sr concentration ratio all lead to decreasing ionic transport in La_0.5Sr_0.5FeO_3−δ. As a result, additions of either Al₂O₃ or SrAl₂O₄ have a deteriorating influence on the oxygen permeation fluxes through La_0.5Sr_0.5FeO₃-based ceramics.     

Electrical and optical study of Cu(In, Ga)Se2 co-evaporated thin films

Co-evaporation technique from three sources was used to prepare Cu(In, Ga)Se₂ polycrystalline thin films for photovoltaic conversion. Their conductivity was studied in the range 20–300 K. The grain boundary scattering mechanism is mainly responsible for the diffusion process in the latter materials. In the low temperature region, we interpret the data in terms of Mott law and the analysis is very consistent with the variable range hopping. However, thermoionic emission is predominant at high temperatures. When the conductivity deviates from the classical grain boundary conduction models, inhomogeneity is then considered and parameters such as the standard deviation and the mean potential barrier height are derived. Transmittance measurements yielded band gap values of 1.07 and 1.64 eV for CuInSe₂ and CuGaSe₂, respectively.     

成色剂COY—5中主要杂质的分析研究

应用高效液相色谱、薄层色谱、质谱及核磁共振谱等仪器分析手段，提出了成色剂ＣＯＹ—５中主要杂质的分子结构，指出了该杂质的产生原因和机理，以及降低该杂质含量的最佳途径