合金工具钢二次硬化能力的判别

为寻求在钢的成份和二次硬化能力之间的定量关系,对国内外40多种钢按作者提出的合金化参数进行计算和整理,证明了用“平衡碳”(Cp)和“碳饱和度”(A) 两个合金化参数判别 (预报) 钢的二次硬度的可能性。     

A Further Comparison of Splitting Rules for Decision-Tree Induction

One approach to learning classification rules from examples is to build decision trees. A review and comparison paper by Mingers (Mingers, 1989) looked at the first stage of tree building, which uses a splitting rule to grow trees with a greedy recursive partitioning algorithm. That paper considered a number of different measures and experimentally examined their behavior on four domains. The main conclusion was that a random splitting rule does not significantly decrease classificational accuracy. This note suggests an alternative experimental method and presents additional results on further domains. Our results indicate that random splitting leads to increased error. These results are at variance with those presented by Mingers.     

65Mn钢CCT曲线及圆锯片淬火工艺

用全自动相变测定仪测定了圆锯片常用６５Ｍｎ钢的连续冷却转为曲线，研究了不同连续冷却速度下得到的组织，为合理制订圆锯片的淬火工艺提供了依据，得到了最佳淬火工艺曲线。     

基于参数辨识的电动机过载保护原理研究

随着我国科技水平快速发展,感应电机不再仅仅是传统工农业生产中使用最多的电机,也是电动汽车领域和航天科技等热点问题中应用较为广泛的动力源。对此,电机中的过载保护技术也需要越来越智能化。在传统的电阻法过载保护基础上提出了一种更加智能的保护方法,实现了对电机运行时定子电阻的实时辨识,再通过电阻与温度的关系直接推算出电机内部温度。以一台1DPT160M系列的变频调速感应电机为例进行试验,验证了该方法的可行性,为电机保护器的过载保护技术提供了新方法。     

小型预制桩基础承载特性数值模拟研究

本文建立硬化土本构模型,针对江苏省软土地区的土质条件选取数值计算参数,通过PLAXIS 2D软件对小型预制桩在的单桩水平受荷及竖向受荷进行数值模拟,得到桩身弯矩沿桩长的分布以及荷载-位移曲线,分析小型预制桩基础桩身弯矩的分布特点,并探求其在水平及竖向荷载作用下的承载特性,进而能够为小型预制桩基础工程设计以及计算方面提供一定的参考依据。     

On certain aspects of strain rate sensitivity of sheet metals

The formability of a material depends upon the strain hardening and strain rate hardening of the material. In this study, constitutive parameters using the power law constitutive equation are determined for six different strength steels and two aluminum alloys over different strain ranges, including approximations of the postuniform elongation range. Constitutive parameters are found to be different at different strain ranges. The strain hardening of steels increases with strain at low strain levels (less than 5%) and decreases at high strain levels (greater than 10%). Strain rate hardening decreases with strain for all steels and aluminum alloys. Uniform elongation depends only on strain hardening, and postuniform elongation depends only on strain rate hardening. However, the total elongation depends on both strain hardening and strain rate hardening.     

汽车稳定杆组织与疲劳性能研究

对28Mn6钢制造的汽车稳定杆，分别采用整体感应加热-整体淬火、连续感应加热淬火两种不同工艺热处理，并进行了台架疲劳寿命试验。采用光镜分析了不同稳定杆的金相组织，用扫描电镜分析了早期疲劳断裂的稳定杆断口形貌。结果表明，获得细小的高韧性索氏体组织是保证良好疲劳寿命的关键，稳定杆喷丸表面质量、游离铁素体也是影响疲劳性能的重要因素。     

Study on Surface Engineering of Normalized Steels Subjected To Machine

Engineering the surfaces of components to improve the life and performance of parts used in automotive and aerospace engineering is the active area of research. Suitable Thermal/Mechanical/Thermo mechanical surface engineering treatments will produce extensive rearrangement of atoms in metals and alloys and corresponding marked variations in Physical, Chemical and Mechanical properties. Among the more important of these treatments are heat treatment processes such as hardening by Quenching, Induction hardening and Case Carburizing which rely on phase transformations to produce desired changes in mechanical properties. Other processes where phase transformation occur are casting, welding and machining etc. [1] Phase transformation may be homogeneous or heterogeneous. Homogeneous involves rearrangements in the structure of the material taking place simultaneously in all parts of the solid, while the heterogeneous transformation involves structural changes which are more localized. Alternatively they could be called as Isothermal and Nonisothermal transformation. But irrespective of the classification, these transformations alter the structure of the material giving rise to changes in the mechanical and physical properties of the processed material. It is of interest to review some consequences of surface modification in isothermal (Normalizing) and nonisothermal transformations (Machining) of low carbon steels.     

接触疲劳过程中的诱发相变和冷作硬化SCIEI

研究了三种丝杠钢的接触疲劳性能。利用TEM和背散射Mossbauer谱研究了三种钢在接触疲劳前后的显微组织结构;测量了接触区中心线下显微硬度随层深的变化。结果表明:接触应力诱发A_R→M相变,并导致一定深度的冷作硬化。讨论了诱发相变和冷作硬化对接触疲劳性能的影响。     

长轴表面激光淬火变形与控制

应用激光淬火强化技术控制长轴的淬火变形，分析了激光淬火变形的原因和影响因素。研究结果表明，激光淬火不仅可使长轴振摆变形量控制在很小的范围内，而且可将已变形的长轴校直到很高的精度。