一种新型矿用本质安全型电源的设计

针对目前煤矿井下多输入电压等级本质安全型电源的笨重和单输入电压等级本质安全型电源的局限性问题,提出了一种新型本质安全型电源的设计方案。该新型本质安全型电源采用R型隔离变压器,体积小;采用高性能的DC/DC开关转换电源,提高了本质安全型电源的转换效率,且减小了输出纹波噪声;同时采用由过流检测芯片、单稳态触发芯片、大功率三极管等组成的双重化过流和过压保护电路,提高了本质安全型电源的可靠性。     

煤矿监控系统本质安全型互连认证方法研究

针对煤矿监控系统结构复杂多变、互连设备类型众多且不断增加的特点,分析了我国传统的本质安全型互连系统认证方法、国外的接口参数认证方法和系列本质安全型标准对我国煤矿监控系统本质安全型互连认证的适用性,指出目前煤矿监控系统本质安全性能的判定依据只能是GB3836.4-2000 equ IEC60079-11:1999,提出了煤矿监控系统非总线型接口设备本质安全型互连认证采用参数认证方法、总线型接口设备本质安全型互连认证目前应采用系统认证方法的方案,详细介绍了参数认证方法和系统认证方法的实施要点及未来实现总线型接口设备本质安全型互连参数认证的途径;还提出了煤矿监控系统接口设备的设计原则,以及煤矿监控系统本质安全型互连认证方法进一步的研究方向。该文有助于煤矿监控系统接口设备本质安全型互连参数认证方法的发展。     

一种新型本征倏逝波型光纤传感器的研究

研究开发了一种新型本征型光纤倏逝波传感器.采用有机玻璃板和大半圆弧高抛光PVC管构成光纤支架,将60/125 μm阶跃多模光纤隔一定距离剥除等长度涂覆层后缠绕于光纤支架上,其无涂覆层部分位于上下两PVC管之间,经化学腐蚀后获得裸芯总长度大于0.5m的新型高灵敏本征型光纤倏逝波传感器.实验结果表明:该传感器对亚甲基蓝的探...     

Computer and Smartphone Continuance Intention: A Motivational Model

This paper develops and tests a motivational model to explain the overall continuance intention to use computers and smartphones. Based on survey data from 192 undergraduate students, structural equation modeling analysis is used to report: (1) the independent effect of intrinsic motivation on the continuance intention to use computers and smartphones; (2) the independent effect of extrinsic motivation on the continuance intention to use computers but not smartphones; (3) intrinsic motivation mediating the effect of extrinsic motivation on the continuance intention to use computers; (4) the independent effect of technology cognizance on the continuance intention to use computers but not smartphones; (5) intrinsic motivation positively influencing extrinsic motivation and technology cognizance, with respect to both devices. This research contributes to an improved understanding of the independent and interrelated effects of intrinsic and extrinsic motivations to use technological devices. The findings have important implications for theory and practice regarding the overall use of technology.     

熔体流动时间法测定PBT树脂特性粘数的研究

开发了一种新的特性粘数分析方法 ,该方法采用熔体流动时间计算特性粘数 ,与经典特性粘数分析方法有很好的相关性且具有分析时间短、费用低、无污染等优点。     

60Si2Mn弹簧圆钢机械性能不合原因及改进措施

鄂钢电炉炼钢厂在生产60Si2Mn弹簧圆钢时,发生较为严重的机械性能不合,主要表现为延伸率及断面收缩率低,试样呈脆性断口,断口及低倍试样中发现有白点缺陷.经分析,造成60Si2Mn弹簧圆钢机械性能不合的主要原因为钢中氢含量高,在工艺中提出改进措施,以改进其机械性能,提高产品质量.     

定向凝固NiAl合金的拉伸行为研究

研究了定向凝固NiAl-Mo(Hf)和NiAl-Fe(Nb)合金的拉伸行为和显微组织变化.结果表明,两种合金在一定的拉伸条件下均具有反常的屈服行为和中温脆性.反常屈服和中温脆性行为与合金中含有的Ni3Al相有关.两种合金在高温时还表现出高应变速率的超塑性变形行为.超塑性变形的主要机理是位错滑移和攀移产生的应变硬化与动态回复和动态再结晶的应变软化作用相平衡.超塑性变形试样的断口呈韧性特征,在断裂区有孔洞产生.     

基于内在变量的空间三角网格的形状混合

本文给出了基于内在变量插值的空间三角网格形状混合的内在解算法。     

铜及铜合金中铅的形态与热加工

文章描述了铅在双相铜合金中的存在形态及在热加工过程中的变化形为。讨论了含铅双相铜合金的热加工过程产生"热脆"的机理,为合理地选择和制定热加工工艺提出了相应的措施。     

Two Pseudogap Behavior in La2?xSrxCuO4: Thermoelectric Power at High Temperature

Thermoelectric power (TEP) of high-T _C superconductors has been investigated in a wide range of temperature (T _C < T < 700 K) for La_2–x Sr _x CuO₄. TEP of La_2–x Sr _x CuO₄ shows different temperature dependences in three temperature regions. In the low-temperature region, a positive broad TEP peak is observed near T _p, which shifts to lower temperature upon doping. As temperature increases, TEP decreases linearly at intermediate temperature. In the high-temperature region, TEP deviates from the linear temperature dependence at a certain temperature, T _h showing a saturation behavior. As the doping concentration increases, the characteristic temperatures, T _C, T _p, and T _h, show systematic changes. In comparison with pseudogap temperature estimated from other experiments, the large pseudogap behavior in TEP at high temperature has been discussed and distinguished from the small pseudogap observed at lower temperature. A possibility of bound pairs formation in the normal state opening the pseudogap at high temperature is discussed briefly. The coexistence of bound pairs and the normal independent carriers for T _C < T < T_h could be the origin of the intrinsic inhomogeneity.