纳米ZnO薄膜制备及液态源掺杂

用真空蒸发法在玻璃和单晶硅片 (10 0 )上制备Zn薄膜 ,然后对Zn薄膜进行氧化、热处理获得纳米ZnO薄膜。对在硅片上制备的Zn薄膜一次性进行高温掺杂、氧化获得纳米ZnO∶P和ZnO∶B薄膜。研究不同氧化、掺杂温度和时间对薄膜结构、电学性能的影响。结果表明 :氧化温度和时间对ZnO薄膜结构影响较大 ,液态源掺P可明显改善纳米ZnO薄膜的导电性能、结构特性和化学组分     

城市道路中的高杆照明

分析高杆照明的特点及其在城市道路中应用的实例，进而阐述高杆照明系统中主要参数的确定方法。     

A novel method of suppressing the inrush current of transformers by using a series‐connected voltage‐source PWM converter

This paper proposes a novel method of suppressing the inrush current of transformers. A small‐rated voltage‐source PWM converter is connected in series to the transformers through a matching transformer. As the connected PWM converter serves as a resistor for the source current, no inrush phenomena occurs. The required rating of the PWM converter, which serves as the damping resistor for the inrush phenomena, is 1/400 that of the main transformers in single‐phase circuits. In three‐phase circuits, it is 1/900. The basic principle of the proposed method is discussed. Digital computer simulation is implemented to confirm the validity and excellent practicability of the proposed method using the PSCAD/EMTDC. A prototype experimental model is constructed and tested. The experimental results demonstrate that the proposed method can perfectly suppress the inrush phenomena. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 157(4): 56–65, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20174     

A novel robust current control approach using adaptive line enhancer for three‐phase current‐source active power filter

An effective system control method is presented for applying a three‐phase current‐source PWM converter with a deadbeat controller to active power filters (APFs). In the shunt‐type configuration, the APF is controlled such that the current drawn by the APF from the utility is equal to the current harmonics and reactive current required for the load. To attain the time‐optimal response of the APF supply current, a two‐dimensional deadbeat control scheme is applied to APF current control. Furthermore, in order to cancel both the delay in the two‐dimensional deadbeat control scheme and the delay in DSP control strategy, an Adaptive Line Enhancer (ALE) is introduced in order to predict the desired value three sampling periods ahead. ALE has another function of bringing robustness to the deadbeat control system. Due to the ALE, settling time is made short in a transient state. On the other hand, total harmonic distortion (THD) of source currents can be minimized compared to the case where ideal identification of the controlled system can be made. The experimental results obtained from the DSP‐based APF are also reported. The compensating ability of this APF is very high in accuracy and responsiveness although the modulation frequency is rather low. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(1): 50–61, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20014     

原油轻烃反吹色谱分析

利用程序升温进样(PTV)和切割反吹色谱分析技术对原油C₁₅及以前的轻烃组分分析方法进行了研究。通过对压力(P₁,P₂)、变压时间和变压速率等进行优化选择,在切除中—重质烃类物质、保护分析柱的同时实现了轻烃组分的快速分离分析,几个难分离物质对的分离度都优于GB/T18430.1—2001和美国1998ASTM:D5134—98的要求,分析结果稳定可靠,轻烃指纹参数和正常色谱分析结果有很好的可比性。应用此方法对准噶尔盆地部分原油样品进行了分析,轻烃地球化学参数特征清晰地反映了油样的同源性和运移方向。      

Rapid determination of chlorophylls in vegetable oils by laser-based fluorometry

The presence of chlorophylls in vegetable oils is considered undesirable due to their adverse effects on oxidative deterioration, bleachability and hydrogenation. The usual methods for determination of chlorophylls in vegetable oils are absorption spectrophotometry, fluorometry and liquid chromatography using fluorescence detectors. This paper outlines a fluorometric method using a laser as the excitation source. The chlorophylls in crude palm oil, rapeseed oil, soya bean oil and olive oil were determined directly by laser-based fluorometry using (a) a helium-neon laser (632-8 nm, 5 mW) as the excitation source and an optical-multichannel analyser (OMA) with an intensified diode array as the detector, and (b) a helium-neon laser and a photomultiplier tube as the detector. The method is especially suitable for the detection of chlorophylls in crude palm oil since no pre-extraction step is required. The levels of chlorophylls measured in vegetable oils using the laser technique was also compared against values obtained by conventional spectrophotometric methods. The simplicity and rapid quantification of laser based fluorometry suggest that this technique can be readily applied to the detection or a wide variety of fluorescing species in vegetable oils.     

EFFECT OF THE RATIO Th/U ON TL DATING ACCURACY

ＥＦＦＥＣＴＯＦＴＨＥＲＡＴＩＯＴｈ／ＵＯＮＴＬＤＡＴＩＮＧＡＣＣＵＲＡＣＹ￥Ｐ．Ｌ．Ｌｅｕｎｇ（梁宝鎏）；ＭｉｃｈａｅｌＪ．Ｓｔｏｋｅｓ（ＤｅｐａｒｔｍｅｎｔｏｆＰｈｙｓｉｃｓａｎｄＭａｔｅｒｉａｌｓＳｃｉｅｎｃｅ，ＣｉｔｙＰｏｌｙｔｅｃｈｎｉｃｏ...     

交流变频调速技术在二辊轧机压下系统中的应用

介绍一种采用变频调速技术控制的二辊轧机压下系统。该系统可控制轧机压下系统的速度在工艺要求的范围内无级可调，压下量以数字动态显示，控制准确、操作方便。文中对系统的组成及工作原理作了较详细的介绍。     

一种适合于听觉神经刺激的可编程双相恒流脉冲发生器

正向设计了一种适合于听觉神经刺激的可编程双相恒流脉冲发生器，它可根据耳聋患者的要求和不同的语音信号，控制刺激电流脉冲的幅度和宽度，以及脉冲之间的间隙。本文阐述了电路的设计要求和方法，并给出了实验结果。采用标准３μｍｐ阱ＣＭＯＳ工艺，在上海贝岭微电子制造有限公司流片。目前已成功地用于多道人工电子耳蜗接收刺激器中。     

微波电子回旋共振等离子体技术及其应用

微波电子回旋共振等离子体是淀积薄膜、微细加工和材料表面改性的一种重要手段。由于这种等离子体电离水平高,化学活性好,可以用来实现基片上薄膜的室温化学气相淀积和反应离子刻蚀,因此对于微电子学、光电子学和薄膜传感器件的发展,这种等离子体会具有重要的意义。此外,采用微波电子回旋共振等离子体原理,没有灯丝的离子源可以提高离子源的使用寿命,可以增加离子束的束流密度。可以确信,微波电子回旋共振等离子体的发展,将把离子源技术提高到一个新的水平。显然,这必将对材料表面改性工艺,包括离子注入掺杂等工艺的发展发挥作用。自从1985年以来,为了得到大容积等离子体而发展了微波电子回旋共振多磁极等离子体,这些技术在薄膜技术、微细加工以及材料表面改性中的应用前景是乐观的。我们将在本文中,介绍微波电子回旋共振等离子体的原理及其应用。