Highly ordered microstructures of poly(styrene-b-isoprene) block copolymers induced by solution meniscus

Microstructures of hundreds of micron thick poly(styrene-block-isoprene) copolymer films solution-cast in a cylindrical tube with the solvent evaporation controlled were investigated by transmission electron microscope (TEM), small angle X-ray scattering (SAXS) and optical microscope (OM). In a block copolymer with cylindrical polyisoprene microdomains, the orientation of the cylinders was varied along radial direction of the cylindrical tube. Highly aligned hexagonal arrays of in-plane polyisoprene cylinders were formed with their cylindrical axis parallel to the circumference of the tube in the regimes close to the wall edge. In contrast randomly ordered microdomains were observed at the center of the tube. We have also found that the orientation depends on the solvent evaporation rate and an intermediate rate (∼2.3 nL/s) provides the best orientation. In the case of a block copolymer with a bicontinuous double gyroid structure, we obtained a globally ordered microstructure where [111] crystallographic direction was parallel to the circumference of the tube. For both block copolymers, the area of highly ordered arrays of nanoscopic domains is over 1 mm². Development of the orientation was explained by coupling two orthogonal fields: (1) The flow of a solution induced by strong capillary force at a meniscus between the cylindrical tube wall and the block copolymer solution and (2) the solvent evaporation.     

安棚深层系凝析气井射孔压井液技术研究

介绍了一种保护油气层的射孔压井液技术，该技术所用的配方具有低密度，低表面张力且具有较强的防膨能力等特点，在安棚深层系低孔低渗油田安3003等凝析气井作业中现场试验，解决了安棚深层系低压气井的水锁伤害等问题，对低孔低渗油气田作业入井流体的研究与应用具有较好的借鉴意义。     

时滞系统控制问题块脉冲算子解的收敛性

本文给出了一种基于块脉冲算子的离散逼近格式.应用这种逼近格式,可以获得时滞非 线性最优控制问题的块脉冲级数解.本文证明了这种块脉冲级数解将收敛于这类问题的精 确解,并具有一阶收敛速度.     

非线性隔振理论初探

本文以线必阻尼，立方刚度非线性系统为例，对非线性隔振理论进行了初步探讨，导出了系统的无量纲运动响应和传递率，并与线性隔振系统进行了比较，着重讨论了非线性对它们的影响，获得了一些有用的结论。     

智能材料电流变流体在运输包装中的应用研究

在深入分析缓冲运输包装基本理论基础上，并将研制的ERF阻尼器用于缓冲隔振支座的设计中，可实现有效的振动控制，使产品在运输过程中不会由于振劝冲击而损坏，经仿真模拟缓冲隔振效果明显。     

火烧油层技术在庙5块低渗透稠油油藏中的应用

方法在物理模拟的基础上，利用数值模拟及油藏工程方法，对影响火烧油层的技术参数进行了优选研究，并对影响火驱成败的油藏地质参数、注气参数进行了分析。目的寻找适合庙５块低渗透稠油油藏的开采方法。结果提出了庙５块火驱的最佳开采方式、点火参数及注气参数；庙５块火驱生产后，平均单井日产液由０１ｔ上升到５６ｔ，平均单井日产油由０１ｔ上升到３５ｔ，生产２６ｄ后由于压风机供风不足被迫停止火驱注气；从数模结果看：火驱最终采收率可达３９８％。结论火烧油层是一种潜力很大的稠油开采方法，但其物理、化学反应机理复杂，火烧前缘难以控制；庙５块火驱初期虽然见到了一定的生产效果，但没有取得经济效益     

STI process steps for sub-quarter micron CMOS

This paper presents Shallow Trench Isolation (STI) process steps for sub-1/4 μ CMOS technologies. Dummy active areas, vertical trench sidewalls, excellent gap filling, counter mask etch step and CMP end point detection, have been used for a 0.18 μm CMOS technology. Electrical results obtained with a 5.5 nm gate oxide thickness show good isolation down to 0.3 μm spacing. Good transistor performances have been demonstrated.     

SOI全介质隔离与高频互补双极兼容工艺

ＳＯＩ材料的全介质隔离技术与高频互补双极工艺的结合是研制抗辐照能力强、频带宽、速度高的集成运算放大器的理想途径，从实验的角度提出了一种ＳＯＩ材料全介质隔离与高频互补双极工艺兼容的工艺途径。     

NUMERICAL MODEL FOR DYNAMIC SIMULATION OF TRAFFIC FLOW

ＮＵＭＥＲＩＣＡＬＭＯＤＥＬＦＯＲＤＹＮＡＭＩＣＳＩＭＵＬＡＴＩＯＮＯＦＴＲＡＦＦＩＣＦＬＯＷＷｕＺｈｅｎｇ；ＺｅｎｇＬｉ－ｎｏｎｇ（ＤｅｐａｒｔｍｅｎｔＡｐｐｌｉｅｄＭｅｃｈａｎｉｃｓ，ＦｕｄａｎＵｎｉｖｅｒｓｉｔｙ，Ｓｈａｇｈａｉ２００４３３，Ｐ...     

Reconfiguration Aspects and a Reconfigurable Outer Block Interleaver for 3G Applications

Reconfiguration concept represents reconfigurable functionalities of the radio interface for mobile radio systems. Particularly for the physical layer, some possible reconfigurable architectures can be identified. We focus on outer interleaving for turbo codes, which can improve their performance in flat Rayleigh fading environment. The larger the number of columns in the outer interleaver, the better is the performance, but with the penalty of more complexity and delay. Furthermore, an incorrect choice of the number of columns can increase the bit and frame error rates. Therefore, it would be advantageous to reconfigure the outer interleaver in different operating environments with the optimum number of columns. Using two different data frame lengths, in this contribution simulation results are presented for the four possible outer block interleaver configurations specified for the 3GPP mobile standard in the case of flat Rayleigh fading channel. It is shown that different operating environments require an optimum number of columns in terms of bit error rate and frame error rate performance. Finally, frame fade duration is considered and the effect of the product of the Doppler frequency with the frame duration on the performance for the four different 3GPP outer block interleaver configurations is discussed. Costas Chaikalis was born in Athens, Greece, on March 7, 1973. He received the B.Sc. degree in electrical engineering in 1995 from Technological Educational Institute of Lamia, Greece. He also received the M.Sc. and Ph.D. degrees from Department of Electronics and Telecommunications, University of Bradford, Bradford, UK in 1999 and 2003, respectively. During his doctoral studies he worked as a Research Assistant for Mobile Virtual Center of Excellence (Mobile VCE), Terminals Group, UK. Since 2003, he is a lecturer in the Department of Electrical Engineering, Technological Educational Institute of Lamia, Greece. His research interests are in all areas of mobile communications but especially in forward error correction coding, reconfigurable (software radio) architectures, cross layer architectures and DSP applications.