金属硫族化合物晶体的研究进展

金属硫族化合物具有特殊的物理化学性质，在半导体材料、催化剂载体、固体化学、电磁及光学特性等高科技领域具有不可替代的重要性．近10年来人们竞相研究，用各种方法合成了成百上千新的金属硫化物、硒化物和碲化物，形成0～3维多硫金属材料，其晶体合成方法有：电化学法、固相合成法、溶剂热法等．文章综述了金属硫族化合物几种合成方法、介绍了晶体的结构特征及其新进展．     

压缩系统对温度突升响应的动态分析

基于时间滞后概念,建立了压缩系统动态响应分析的通用模型,并对温度突升条件下多级轴流压缩系统的动态响应及气动稳定性进行了详细的数值分析。对两个算例的分析,结果表明了本文新模型的可行性。     

Böhler Edelstahl

Böhler Edelstahl produces high performance tool and high speed steels via an optimised powder metallurgy/hot isostatic pressing route, as part of a high value special alloys portfolio.     

Mechanism of simultaneous tripping of ground directional relays in a 6.6‐kV distribution system

In Kyushu Electric Power's 6.6‐kV distribution system, after a single‐phase ground fault occurred in the circuit of a distribution line, we experienced a phenomenon in which the analogue ground directional relays of the other circuits linked to the same bank were simultaneously tripped. In this paper, focus is placed on the mechanism and possibility of simultaneous tripping of ground directional relays. This mechanism was examined in an experiment carried out using an analogue simulator. The results of the test revealed that such simultaneous tripping was attributable to the neutral instability phenomenon of grounding potential transformers installed in an isolated neutral system. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 171(2): 23–30, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20919     

Transition Temperature of Bi_2Sr_2CaCu_2O_(8+x) Superconducting Films Prepared from Commercial Precursors

This paper have made a systematic study of the superconducting Bi-2212 phase transition temperature, which has a transition temperature (Tc) around 80-93 K, and depends on precise control of synthesis conditions, mainly including heat treatment parameters, oxygen partial pressure, and annealing temperature. Partial melting of the sample during preparation helps to raise its Tc. To elucidate the origin of this strong effect, the samples were heated with different melting process. The rapid changes in Tc valu...     

Research on forecasting model of sandstone deformation rate during sine wave loading segment under the lag effect

To reduce data variance caused by individual differences of different samples,a new experimental method is proposed by loading and unloading the axial forces with different frequencies and different waves of a certain load amplitude to the same rock sample without damaging it.Lag time segments are defined and fractionized into segments I and Ⅱ.Criterions for seg-mentation,definitions of relevant parameters and empirical analysis are also offered afterwards.In the course of sinusoidal loading,the serious pea...     

激光熔覆过程中熔池图像的实时检测

建立了基于CCD摄像机的激光熔覆过程检测系统，得到熔池的动态变化过程。从动态视频中读取每祯数字图像，获得稳定的熔池区图像。对熔池图像处理的算法进行研究，得到清晰准确的熔池形貌边缘;提取熔池中心，得到单道熔覆层熔池的相对高度变化，能够近似表征沉积表面的起伏。在图像采集卡与计算机图像处理单元互相通信和采集软件模块的基础上进行连续视频图像实时处理程序的开发，在0.2 s内完成对图像的采集处理工作，为获得精确的熔池位置偏差和激光熔覆过程控制提供了检测基础。     

全光纤电光主动调Q激光器

利用马赫曾德尔Mach-Zehnder (M-Z)结构的尾纤型铌酸锂(LiNbO3)电光强度调制器作为Q开关元件,采用974nm半导体激光器作为泵浦源,峰值吸收系数为110dB/m的掺杂铒纤作为增益介质,实现了1550nm波长的全光纤主动调Q激光器。通过电光强度调制器对腔内损耗进行周期性调制,实现Q开关作用,获得了稳定的调Q脉冲输出。实验中通过改变泵浦功率和调制频率,研究了脉冲宽度和峰值功率的变化规律。获得输出脉冲重复频率50Hz-88kHz可调,重复频率1kHz时获得最窄脉冲宽度246ns,峰值功率近5W。     

海工钢管桩被覆聚乙烯粘接剂的试验研究

采用正交设计法研究聚乙烯／钢的热熔粘接剂，得到了择优配方。同时，还测试了环境温度、材质的表面处理等对其粘接强度的影响，以及耐腐蚀性能，另外，还将择优配方粘接剂与部分市售热熔粘接剂进行了性能比较。