PVC发泡制品用助剂--优泡剂

分析了PVC发泡制品成型加工时存在的缺陷,说明了添加优泡剂可弥补PVC发泡制品的缺陷,提高泡孔质量,介绍了优泡剂的品种和使用场合及使用量。     

压出过程中胎面胶流动特性的研究

应用Monsanto加工性能试验机(MPT)对胎面胶进行压出流变试验。在实验条件下,考察试样熔体的流动特性及其影响因素,并作初步的分析和讨论。实验发现,试样的流动曲线可近似用指数方程描述;而熔体粘度对温度的依赖性则大体上符合Arrhenius方程。     

ABS/镁盐晶须复合材料的研究

以（乙烯／乙酸乙烯酯／苯乙烯）三元共聚物（BS树脂）为增容荆，采用双螺杆挤出机制备了（丙烯腈／丁二烯／苯乙烯）共聚物（ABs）／镁盐晶须复合材料，研究了BS树脂、镁盐晶须用量对复合材料力学性能、流动性能的影响、结果表明，加入BS树脂有利于提高复合材料的拉伸强度和冲击强度，复合材料的熔体流动速率（MFR）随BS树脂用量增加而增大，且其MFR对温度或负荷呈非线性函数关系，比ABS对负荷更为敏感．     

Synthesis and characterization of aromatic copolyesters containing siloxane linkages in the polymer backbone

A new series of aromatic copolyesters containing siloxane linkages were prepared by the melt polymerization of bisphenol A (BPA) with eugenol end‐capped siloxane (EuSi), diphenyl terephthalate (DPT), and diphenyl isophthalate (DPI) in varying ratio in the temperature range 220–290°C under reduced pressure in the presence of dibutyl tin dilaurate (DBTL) catalyst. The siloxane copolyesters prepared were characterized by FTIR, ¹H‐NMR spectroscopy, solution viscosity, thermogravimetric analysis, differential scanning calorimetry, and X‐ray diffraction. The effect of incorporation of eugenol end‐capped siloxane was studied on the properties of BPA/DPI/DPT copolyesters. The glass‐transition temperature of copolyester was decreased from 184 to 70°C by incorporation of 20% of eugenol end‐capped siloxane. All copolyesters were found to be soluble in commonly used aprotic polar solvents and had film‐forming properties. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3222–3228, 2006     

苹果酸二薄荷酯的制备及其热裂解性质

以薄荷醇和苹果酸为原料,对甲苯磺酸为催化剂,采用熔融酯化法制备苹果酸二薄荷酯。优化的反应条件为:催化剂用量w(对甲苯磺酸)=1 5%,原料配比n(薄荷醇)/n(苹果酸)=2 4,反应时间5h,反应温度120℃,苹果酸二薄荷酯收率达61 5%。产物经IR、MS和1HNMR进行了结构表征,并在300、600和900℃对其热裂解性质进行了研究。     

Effect of different carbon fillers on the properties of PP composites: Comparison of carbon black with multiwalled carbon nanotubes

Polypropylene (PP)/carbon composites were prepared via melt blending PP with carbon fillers, including multiwalled carbon nanotubes (MWNTs) and carbon black (CB). Field‐emission scanning electron microscopy was used to research the morphology and dispersion of fillers in the PP matrix. The electrical properties, mechanical properties, and crystallization behaviors of PP/carbon composites were also investigated. The results show that the influence of MWNTs on the properties of PP composites is different with CB, which can be ascribed to the structure and aspect ratio difference between MWNTs and CB. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:4823–4830, 2006     

齿轮泵挤出技术在橡塑行业的应用与发展

简要介绍了齿轮泵的结构、性能及工作原理，从齿轮泵挤出机的发展，齿轮泵挤出系统向压延机喂料，齿轮泵与MCTD挤出机相结合三个方面，讲述了其在橡塑行业中应用的优越性及缺憾。     

强化单螺杆挤出机内层流混合的方法

综述了单螺杆挤出机内聚合物熔体层流混合机理的研究进展，对提高混合的措施进行了分析总结，指出了进一步强化混合效果的方法。     

毛细管动态挤出下聚合物熔体非线性流变行为的研究

采用毛细管动态流变仪,选用PELD、PP、PS和PA等典型物料,研究了毛细管动态挤出下各聚合物熔体的非线性流变行为。结果表明,不同物料的流变行为对振动力场的响应特性有较大差异,只有在一定的振幅和频率下振动力场才能有效降低熔体的黏度。实验首次发现,PP、PS和PA存在窄的振动参数区域,在此区域内,熔体的动态表观黏度值大于相应的稳态值,出现“加振变黏”现象。这一新的发现表明,并非“只要引入振动就一定有利于聚合物材料的成型加工”,必须考虑不同分子结构的聚合物材料对振动的不同响应规律。     

间歇式聚丙烯装置产品熔体流动指数的控制

针对间歇式液相本体法聚丙烯装置的生产特点,根据实际生产经验,从原料、催化剂的选择与配方、升温操作、氢调、设备维护等对如何控制聚丙烯粉料熔体流动指数进行了分析。结果表明:只要控制得当,间歇式聚丙烯装置产品的熔体流动指数可以控制在(n±1.5)g/10min(n为预定值)的稳定范围。