Emissivity Measurements on Metallic Surfaces with Various Degrees of Roughness: A Comparison of Laser Polarimetry and Integrating Sphere Reflectometry

Both integrating sphere reflectometry (ISR) as well as laser polarimetry have their advantages and limitations in their ability to determine the normal spectral emissivity of metallic samples. Laser polarimetry has been used for years to obtain normal spectral emissivity measurements on pulse-heated materials. The method is based on the Fresnel equations, which describe reflection and refraction at an ideally smooth interface between two isotropic media. However, polarimetry is frequently used with surfaces that clearly deviate from this ideal condition. Questions arise with respect to the applicability of the simple Fresnel equations to non-specular surfaces. On the other hand, reflectometry utilizing integrating spheres provides a measurement of the hemispherical spectral reflectance, from which the normal spectral emissivity can be derived. ISR provides data on spectral-normal-hemispherical reflectance and, hence, normal spectral emissivity for a variety of surfaces. However, the resulting errors are minimal when both the sample and the reference have a similar bidirectional reflectance distribution function (BRDF). In an effort to explore the limits of polarimetry in terms of surface roughness, room temperature measurements on the same samples with various degrees of roughness were performed using both ISR and a laser polarimeter. In this paper the two methods are briefly described and the results of the comparison are discussed.     

红旗轿车三维分离流动特性

介绍了使用激光片光技术及激光多普勒测速仪对红旗ＣＡ７７４ 轿车尾流的三维分离流的尾迹和速度分布测定的试验研究。研究表明,光学流态显示和数字图象技术相结合,可以有效地揭示汽车的尾流结构,诊断阻力来源。本项研究为建立汽车三维分离流动的动态仿真理论模型提供了依据。     

Uniformity of gallium doped zinc oxide thin film prepared by pulsed laser deposition

Recently, transparent conducting oxide thin films have attracted attention for the application to transparent conducting electrodes. In this work, we evaluated the uniformity of electrical, optical and structural properties for gallium doped zinc oxide thin films prepared on the 10 × 10 cm² silica glass substrate by pulsed laser deposition. The resistivity, carrier concentration, mobility, bonding state and atomic composition of the film were uniform along in-plane and depth direction over the 10 × 10 cm² area of the substrate. The film showed the average transmittance of 81-87%, resistivity of 1.4 × 10^− 3 Ω cm, carrier concentration of 9.7 × 10²⁰/cm³ and mobility of 5 cm²/Vs in spite of the amorphous X-ray diffraction pattern. The gradual thickness distribution was found, however, the potential for large-area and low temperature deposition of transparent conducting oxide thin film using pulsed laser deposition method was confirmed.     

一种新型的激光—等离子体辅助化学气相沉积装置的研究

为探索用激光离子体共同辅助化学气相沉积过程以实现室温沉积的可能性，设计并制造了一种新型的ＣＶＤ装置，实际了ＳｉＨ４－ＮＨ３－Ｎ２体系制取Ｓｉ３Ｎ４膜的试验。结果表明，激光和等离子体是可以相互促进，共同辅助ＣＶＤ过程的，且两者均处于较代的能量水平。     

激光法合成纳米金刚石的高分辨电镜研究

在常温常压下,采用脉冲激光作用循环的石墨悬浮液,收集并烘干得到样品B,另一部分用高氯酸进行酸煮提纯提到样品A.对样品A、B分别进行高分辨电子显微镜（HRTEM）和显微拉曼光谱（Micro-Raman）分析.结果表明,部分石墨经激光作用后转变成了具有多重孪晶结构特征的、尺寸为5 nm的金刚石颗粒,同时还得到了非晶碳.高分辨电子显微镜照片证明,石墨转变成纳米金刚石的机理为快速成核长大过程.     

Effect of selective laser melting on microstructure and properties of AZ91D alloy

Selective laser melting technology is used to manufacture porous and solid AZ91D alloys. The effects of laser power and hatch spacing on the density, blowholes, microstructure and mechanical properties of AZ91D alloy are studied. The laser power and hatch spacing play a significant role in the density and blowholes of AZ91D specimens. The grains size of specimens increases from 1 μm–2 μm to 8 μm–10 μm from the bottom to the top in single molten pool. Compared with grain size of die‐casting alloy (30 μm), that of selective laser melted gets refinement. There is no significant change in microstructure in the bottom, middle and top of specimens. The micro‐hardness of AZ91D alloy, reaching up to 115.3 HV 0.1, is superior to that of die‐casting alloy (56 HV 0.1). The compression properties of porous and solid specimens reach the degree of die‐casting solid magnesium alloy. AZ91D alloy shows the potential in the application of medical biodegradable materials.     

Characteristics of Ions Emitted from Laser-Induced Silver Plasma

In this work, study of laser-induced ions is presented. The plasma was produced by focusing a Nd：YAG laser, with a wavelength of 1064 nm, a pulsed width of 9-14 ns, a power of 1.1 MW and energy of 10 mJ, on silver target in vacuum （10-3 Torr= 1.3332 Pa）. The characteristics of ion streams were investigated by CR-39 detectors located at angles of 0°, 30°, 60° and 90° with respect to normal of the target. The distance between the silver target and each detector was 11 cm. The energy of silver ions was found ranging from 1.5 eV to 1.06E4 eV. There was a high concentration of ions with low energy as compared to those with high energy, showing the energy distribution amongst the ions. The flux of ions was maximum in the axial direction which was decreasing with the angle increase with respect to normal of the target, and finally became minimum in the radial direction. Hence the silver ions have shown anisotropic behaviour.     

125 MN挤压机挤压中心在线监测系统设计

125 MN挤压机挤压中心检测目前采用人工测量计算法,工作量大且精度低.本文在分析常见光电位置检测方法的基础上,结合激光技术和图像处理技术,设计了一种新的挤压中心在线监测系统.阐述了该监测系统的原理和实施方案,建立了中心偏移量和偏转角度计算的几何模型,推导了计算公式,进行了模拟试验并做了误差分析.系统可同时对穿孔横梁、穿孔动梁、固定横梁、活动横梁和挤压容室进行在线监测,监测距离达35 m.     

自动送粉激光熔覆装置及工艺研究

研制了一种工作稳定性好、粉末流量连续可调的自动送粉装置。经A_3钢表面激光熔覆WF-150不锈钢合金粉末的研究表明,所获得的激光熔覆层均匀连续、无宏观气孔和裂纹,粉末利用率高达94％。