Effects of modeling means on properties of monitoring models of spot welding quality

Analyzing and modeling the relation between monitoring information during welding and quality information of the joints is the foundation of monitoring resistance spot welding quality. According to the means of modeling, the known models can be divided into three large categories: single linear regression models, multiple linear regression models and multiple non-linear models. By modeling the relations between dynamic resistance information and welding quality parameters with different means, this paper analyzes effects of modeling means on performances of monitoring models of resistance spot welding quality. From the test results, the following conclusions can be drawn: By comparison with two other kinds of models, artificial neural network (ANN) model can describe non-linear and high coupling relationship between monitoring information and quality information more reasonably, improve performance of monitoring model remarkably, and make the estimated values of welding quality parameters more accurate and reliable.     

蓝疆号起重铺管船托管架拖挂结构的质量及进度控制

蓝疆号起重铺管船是一艘集起重、管道铺设于一身的多功能新型船舶,在铺管作业系统中,设有一连接船体与托管架的独立结构——拖挂结构。介绍这个由特厚高强钢板组焊而成的结构在制造过程和现场施工中的质量控制及进度控制,供从事工程管理人员参考。     

CMS/TiO2杂化材料电流变液的制备及其性能

利用特殊的溶胶凝胶方法原位制备了改性淀粉与无机钛氧化物杂化型电流变材料。实验表明,在强电场下其电流变效应比相同组份的淀粉、二氧化钛混合型电流变液有显著提高,直流电场4 kV/mm,剪切速率5 s-1时,静态剪切屈服强度可达4000 Pa以上。同时,抗沉降性明显改善,静置100 h几乎不沉淀。此外,温度效应也获得一定的优化,在10 ℃~90 ℃的工作温度范围内力学性能保持良好,70 ℃时剪切强度达到最大值。     

MB8镁合金薄板的搅拌摩擦焊

针对我国航空航天工业常用的MB8镁合金。采用搅拌摩擦焊工艺进行焊接，对其焊缝的成形特点、组织特征和力学性能进行分析。结果表明，采用搅拌摩擦焊焊接镁合金效果良好。     

古洞口水利水电工程泄洪洞工作弧门安装工艺

介绍了古洞口工程泄洪洞工作弧门在特定地形下采用固定卷扬式启闭机和汽车吊配合闸室的预埋件进行闸门安装的施工工艺。对闸门的吊装、调整及焊接工艺的具体措施作了详细分析,解决了该工作弧门在洞内安装的关键施工技术问题。     

An analog circuit design environment based on cooperating blackboard systems

A novel approach to design automation for analog circuits is presented. The prototype implementation-OASE-has been realized as a set of cooperating expert systems with blackboard architecture. The circuit specific knowledge bases use hybrid representation schemes and are strictly separated from an execution engine containing the necessary control knowledge. This alleviates the knowledge acquisition process as well as the extension and maintenance of existing knowledge. OASE has been developed as a design assistant, featuring different levels of interactivity, a hierarchical design style and fully embedded algorithmic standard tools. In its current version it is able to design a broad range of different CMOS operational amplifiers.     

摩擦焊在钢制实心抽油杆修复中的应用

通过对焊接工艺及焊后热处理工艺优化，采用摩擦焊接技术对报废抽油杆中仍有使用寿命的杆头与杆体进行了拼接，获得了性能达标的抽油杆。从而提高了旧杆的修复率．降低了采油成本。该技术可在抽油杆修复及相关行业进行推广应用。     

植筋施工工艺

以某网球馆改造工程为例 ,就植筋技术的概念及所用材料进行了介绍 ,详细阐述了其施工工艺流程及措施 ,指出植筋技术具有工艺简单、操作方便、造价相对较低等优点     

铁素体球墨铸铁与20钢的闪光对焊

试验使用铁素体球墨铸铁和20钢的实心棒料进行了闪光对焊，通过改变次级电压4～8级，通电时间3～5s，观察其焊接接头组织的变化并测定其抗拉强度。结果表明，接头由三个区组成；当通电时间一定时，抗拉强度随次级电压的升高先减小后增大；当次级电压一定时，抗拉强度随通电时间的增加而增大。在次级电压为8级、通电时间为5s时，抗拉强度达最大值，为370．8MPa，是20钢母材的90.4％，是球墨铸铁母材的83.7％。     

天然气管网输配气量优化研究

天然气管网系统管理部门为了明确天然气管网的输气能力和提高天然气管网的利用率，需要对天然气管网系统的输配气量进行优化。为此，以天然气管网系统的最大流量为目标函数，同时考虑了管道强度、节点压力和流量限制等约束条件，建立了天然气管网输配气量优化的数学模型。在研究遗传算法和模拟退火算法的基础上，提出了一种由二者结合构成的具有全域搜索、快速收敛和鲁棒性强等特点的混合遗传算法。结合实例，采用这一新算法求解了天然气管网输配气量优化的数学模型。实例优化结果表明，所建立的数学模型和采用的混合遗传算法是可行和有效的，能够对天然气管网系统输配气量的调度运行起到指导作用。