基于新障碍参数更新的二阶Mehrotra型预估—校正算法

针对二阶Mehrotra型预估-校正算法的一种变型算法,本文介绍一种新的自适应障碍参数更新法。利用该更新方法提出了相应的算法。新算法与之前的二阶Mehrotra型预估-校正算法相比,不用根据预估步和校正步的步长来确定参数的更新,而是在每步迭代中都采用自适应更新。最后证明了该算法在没有引进任何＂保障措施＂的情况下也具有相同的多项式时间复杂度。     

关于《求解LP问题的部分基变量算法》的勘误及补正

文章针对周康等人的《求解LP问题的部分基变量算法》一文进行了分析,指出其文中算法原理及算法步骤存在的一些错误,补正了算法的不完善之处,并通过数值试验验证算法的计算性能。     

Optimal design of butterfly-shaped linear ultrasonic motor using finite element method and response surface methodology

A new method for optimizing a butterfly-shaped linear ultrasonic motor was proposed to maximize its mechanical output. The finite element analysis technology and response surface methodology were combined together to realize the optimal design of the butterfly-shaped linear ultrasonic motor. First, the operation principle of the motor was introduced. Second, the finite element parameterized model of the stator of the motor was built using ANSYS parametric design language and some structure parameters of the stator were selected as design variables. Third, the sample points were selected in design variable space using latin hypercube Design. Through modal analysis and harmonic response analysis of the stator based on these sample points, the target responses were obtained. These sample points and response values were combined together to build a response surface model. Finally, the simplex method was used to find the optimal solution. The experimental results showed that many aspects of the design requirements of the butterfly-shaped linear ultrasonic motor have been fulfilled. The prototype motor fabricated based on the optimal design result exhibited considerably high dynamic performance, such as no-load speed of 873 mm/s, maximal thrust of 27.5 N, maximal efficiency of 43%, and thrust-weight ratio of 45.8.     

基于多子空间线性判别分析的特征提取与分类

为了解决高维小样本数据的分类中Fisherface思想判别分析方法的不足,在最大散度差准则的基础上,提出了利用多线性子空间技术对每类样本进行单独描述的方法,该方法能更准确地反映样本在类内类间的分布关系.在分类中不是以距离作为判别依据,而是按照贝叶斯决策规则得到的隶属置信度作为衡量标准.实验结果表明了该方法的有效性,和同类方法相比,有更高的识别率.     

一次同余方程组的一种矩阵解法

同余方程组是数论中一个极为有用的课题。文中考虑的是具有一个未知数而具有不同的模的一次同余方程组。一般可以用中国剩余定理或者递推算法等方法给出一次同余方程组的解法。利用矩阵的初等变换和矩阵的Sm ith标准形给出了求解一次同余方程组的一种矩阵解法。     

Nanoluminograph — A New Generation of Measuring Instruments

A nanoluminescent device, or nanoluminograph, has been developed, created, and patented. By means of the device, unique information about the physicochemical properties of surface and near-surface layers of solids and ultrathin coatings of thickness less than 0.4 μm may be obtained. There is also the hope of decreasing the thickness of the subject layer with further development of the detecting component of the device. __________ Translated from Izmeritel'naya Tekhnika, No. 8, pp. 28–31, August, 2005.     

静态随机存储器单粒子翻转效应的二维数值模拟

采用MEDICI二维模拟软件对静态存储器SRAM的单粒子翻转(SEU)现象进行了计算。对MOSFET漏区模拟得到的结果与电荷漏斗模型相吻合,表明所建立的物理模型的正确性。通过输入不同粒子的线性能量传输LET值,得到了某一结构器件的收集电荷与LET值的关系曲线,并给出临界电荷7 73×10-14C。     

测控系统中软件抗干扰方法的应用

介绍了测控系统中，根据各点采样数据似合出线性函数并过滤采样数据的干扰以提高系统可靠性。     

多层理论在圆筒型直线感应电动机计算上的应用

本文从麦克斯韦方程出发，在圆柱坐标系下建立了圆筒型直线电机的多层理论分析模用该模型对一台样机进行实例计算，并与磁阻抗法和实验值进行了比较，计算结果表明该方法的正确性和有效性。