32位MIPS微处理器中乘法器的设计和实现

在Booth算法的基础上,结合MIPS 4KC微处理器中的流水线结构和乘法器的工作过程,提出了一种改进的Booth乘法器的设计方法,并采用全制定方法实现,用这种方法实现的乘法器单元具有面积小、单元电路可重复性好、版图设计工作量小、功耗低等特点.     

SoC低功耗设计中的DVS技术

随着系统芯片(SoC)集成更多的功能并采用更先进的工艺,它所面临的高性能与低功耗的矛盾越来越突出.动态电压调整(DVS)技术可以在不影响处理器性能的前提下,通过性能预测软件根据处理器的繁忙程度调整处理器的工作电压和工作频率,达到降低芯片功耗的目的.文中讨论了DVS技术降低功耗的可能性,介绍了如何利用两种不同的DVS技术让处理器根据当前的工作负荷运行在不同的性能水平上,以节省不必要的功耗.     

一种低功耗Cache设计技术的研究

低功耗、高性能的cache系统设计是嵌入式DSP芯片设计的关键。本文在多媒体处理DSP芯片MD32的设计实践中，提出一种利用读／写缓冲器作为零级cache，减少对数据、指令cache的读／写次数，由于缓冲器读取功耗远远小于片上cache，从而减小cache相关功耗的方法。通过多种多媒体处理测试程序的验证，该技术可减少对指令cache或者数据cache20％～40％的读取次数，以较小芯片面积的增加换取了较大的功耗降低。     

Treatment of low turbidity water by sweep coagulation using bentonite

A novel strategy of sweep coagulation to treat low turbidity water is presented herein. Study findings demonstrated that an Na⁺‐saturated bentonite with medium cation exchange capacity (CEC) resulted in significant turbidity removal at a bentonite dosage of 30 mg dm^?3. Bentonite dispersion with fully delaminated platelets tended to undergo a more porous type of coagulation with intense face‐to‐face interactions of platelets and effectively entrapped TiO₂ particles in band‐type structures. This type of coagulation usually results in a large volume of settled flocs with a fluffy structure and excellent turbidity removal efficiency for sweep coagulation. The sign and magnitude of electrical charge on TiO₂ particles has a minor effect on the efficiency of sweep coagulation. Copyright © 2005 Society of Chemical Industry     

Understanding and Modeling the Effect of Surfactants in Enhanced Particle Removal from Surfaces in Aqueous Media

The removal of particulate contamination is a critical issue for many manufacturing processes. It is particularly critical to the electronics industry in which small pieces of microscopic debris remaining after chemical mechanical planarization (cmp) using submicron polishing particles can cause device failure. One way to enhance particle removal following the cmp process is to utilize surfactants. Recent research has shown ways to model the effect of surfactants on enhanced particle removal. However, previous research has not demonstrated the effect of ionic strength on enhanced particle removal associated with surfactant use. Past research has also not shown the combined effects of ionic strength and surfactant concentration on enhanced particle removal using surfactants. This article summarizes the parameters affecting particle removal, and it provides data and analysis on the effect of ionic strength as well as the combined effects of ionic strength and surfactant concentration on particle removal following cmp processing.     

Adaptive Edge Detectors for Piecewise Smooth Data Based on the minmod Limiter

We are concerned with the detection of edges—the location and amplitudes of jump discontinuities of piecewise smooth data realized in terms of its discrete grid values. We discuss the interplay between two approaches. One approach, realized in the physical space, is based on local differences and is typically limited to low-order of accuracy. An alternative approach developed in our previous work [Gelb and Tadmor, Appl. Comp. Harmonic Anal., 7, 101–135 (1999)] and realized in the dual Fourier space, is based on concentration factors; with a proper choice of concentration factors one can achieve higher-orders—in fact in [Gelb and Tadmor, SIAM J. Numer. Anal., 38, 1389–1408 (2001)] we constructed exponentially accurate edge detectors. Since the stencil of these highly-accurate detectors is global, an outside threshold parameter is required to avoid oscillations in the immediate neighborhood of discontinuities. In this paper we introduce an adaptive edge detection procedure based on a cross-breading between the local and global detectors. This is achieved by using the minmod limiter to suppress spurious oscillations near discontinuities while retaining high-order accuracy away from the jumps. The resulting method provides a family of robust, parameter-free edge-detectors for piecewise smooth data. We conclude with a series of one- and two-dimensional simulations.To David Gottlieb, on his 60th birthday, with friendship and appreciation.     

泡沫酸化工艺对川中低压裂缝性油藏适应性的认识

针对川中油田经过多年的消耗式开采,各主产油田压力很低,增产改造的难度增大的发展现状,提出应用泡沫酸化工艺技术在川中低压油层增产改造的技术方案,其中分析了泡沫酸的物理特性、其在地层优良的渗流特性(滤失小、酸岩反应速度慢、返排迅速等优点),并进行了泡沫酸液体系的室内配方研究,提出了工艺设施的矿场配套研究内容.得出了泡沫酸化工艺对川中低压裂缝性油藏改造具有很强的适应性,具有推广应用的价值.     

朝阳沟裂缝性低渗透油田井网适应性研究

通过对比分析朝阳沟裂缝性低渗透油藏与裂缝主方向分别成11.5°和22.5°的两种不同井网的开发效果,表明与裂缝成11.5°的井网与裂缝匹配性较差,开发效果相对较差。并从油藏的水驱控制程度、压力传导情况、采收率及经济效益等方面研究评价了朝1.55区井网的适应性,为指导油田的加密调整,在技术和经济两方面综合评价确定了合理的井距和井网密度,并针对朝1-55区的地质特征,提出了井网和注水方式调整办法,在朝55区块实施后,取得了较好的现场试验效果。     

特低渗油藏渗流特征及增产技术研究

从特低渗储层渗流机理研究出发，分析了其渗流规律——非达西渗流特征；根据储层中上覆岩石围压变化，通过室内试验表述了其对渗透率伤害。研究提出了改善渗流特征的注水条件、井网优化和压裂对策，可以有效提高这类油藏的开发效果。     

ISIS全局优化多道反演技术在墩2块岩性油藏描述中的应用

为进一步落实墩2块戴一段岩性油藏成藏规模及分布规律，针对该储层薄、横向变化快的特点，利用ISIS全局优化多道反演技术，对该构造区岩性储层进行了精细描述，较好的预测出戴一段储层平面分布规律。