Engset multi‐rate state‐dependent loss models with QoS guarantee

We consider a single link loss system of quasi‐random input, described by the Engset multirate loss model (EnMLM). Blocked calls may once reattempt to be connected to the system requiring less bandwidth; then the system is described by the single retry model for finite sources (f‐SRM). The EnMLM and the f‐SRM are extended with the single threshold finite source model (f‐STM), where calls may attempt to be connected to the system with less bandwidth requirements, according to the link occupancy, before blocking occurs. We focus on CBP equalization in the EnMLM, f‐SRM and f‐STM, under the bandwidth reservation (BR) policy. For this analysis, we apply two approximate methods, the Roberts' method and the method of reverse transition rates (RTR), which lead to a recursive CBP calculation. We evaluate the accuracy of the above models under the BR policy by comparing the analytical with simulation CBP results, based on the relative approximation errors (RAE). The results are highly satisfactory because they show that the proposed models (formulas) lead to small RAE. Copyright © 2005 John Wiley & Sons, Ltd.     

填充HDPE复合材料基体结晶形态的控制因素

本文以HDPE/玻璃微珠和HDPE/CaCO₃体系为研究模型,通过扫描电镜、红外光谱、偏光显微、小角激光散射和材料力学性能实验等方法考察了这两种体系的界面粘结性、填料含量、粒径及试样成型冷却速率等与其材料性能及基体结晶形态变化间的关系。实验结果表明;在复合材料试样成型过程中,因基体树脂冷却收缩而产生的界面应力可干扰基体中球晶的生长环境,应变诱导填料颗粒周围基体树脂的结晶,促使其表面伸展链晶体结构的形成,并由此而明显改变了复合材料的耐热性;复合材料的界面粘结性是产生这种应变诱导作用,并控制异相结晶的关键。     

X-射线荧光增量法测定硅铁合金中的Ca、Ba

介绍了X-射线荧光增量法同时测定硅铁合金中的Ca、Ba，探讨了基体效应校正、扩展曲线的应用范围，方法准确度和精度高。     

水平井现场地质导向方法及其应用

为了降低水平井的钻探工程成本，要尽量不钻或少钻导眼井段。根据水平井在钻前准备、深度预测、稳定井斜、水平导入4个阶段的不同作业特点，依据现场施工经验，归纳提出了利用公式法、小导眼法、曲线指示法、扭矩与dc指数法等方法进行地质导向的成功实践。利用这些方法，可以有效地指导现场钻井人员，将钻井轨迹比较准确地导入目的层中。     

螺旋弹簧的非线性理论及实验研究

本文通过对经典的圆柱螺旋弹簧理论的修正,给出了非线性理论解析公式.还通过对螺旋弹簧的精确测量和处理,验证了本文的非线性理论.     

TFT有源矩阵α－Si∶H薄膜PECVD淀积工艺研究

分析了α－Ｓｉ∶Ｈ薄膜的质量和厚度对α－Ｓｉ∶ＨＴＦＴ关键性指标的影响，深入、详细地讨论了其ＰＥＣＶＤ淀积工艺，并在实验的基础上确定了最佳淀积工艺参数，从而获得了高性能的７５ｍｍ３７２×２７６像素α－Ｓｉ∶ＨＴＦＴ有源矩阵     

圆柱形螺旋弹簧的简捷计算

将圆柱形螺旋弹簧设计中的部分常用公式组合成一组仅与弹簧指数Ｃ有关的公式，并将Ｃ＝４～１４代入计算而获得一套参数表，由此，可提高圆柱形螺旋弹簧的设计效率。     

An elementary proof of Sylvester’s double sums for subresultants

In 1853 Sylvester stated and proved an elegant formula that expresses the polynomial subresultants in terms of the roots of the input polynomials. Sylvester’s formula was also recently proved by Lascoux and Pragacz using multi-Schur functions and divided differences. In this paper, we provide an elementary proof that uses only basic properties of matrix multiplication and Vandermonde determinants.     

一种基于时间分层决策矩阵的综合评价算法

综合评价系统用四元总体（A，Z，X^(k)，D）表示，其中决策矩阵X^(k)是具有对象维i,指标维j,时间维k的三维矩阵，将三维矩阵X（k)按时间划分形成m个二维矩阵，每个二维矩阵分别代表每个年度n个评价对象对应于p个指标的属性集，讨论了按时间分层决策矩阵的多指标综合评价问题，描述了按时间分层的决策矩阵的求解算法，并采用Visual Foxpro数据库语言编程实现。     

加权算术平均与几何平均关系式的新证法

利用函数极小点的性质,得到了若干个正数的加权算术平均与几何平均关系式的新证法