Effects of electrical discharge surface modification of superalloy Haynes 230 with aluminum and molybdenum on oxidation behavior

The effects of the electrical discharge alloying (EDA) process on improving the high temperature oxidation resistance of the Ni-based superalloy Haynes 230 have been investigated. The 85 at.% Al and 15 at.% Mo composite electrode provided the surface alloying materials. An Al-rich layer is produced on the surface of the EDA specimen alloyed with positive electrode polarity, whereas, many discontinuous piled layers are attached to the surface of the EDA superalloy when negative electrode polarity is selected. The oxidation resistance of the specimen alloyed with positive electrode polarity is better than that of the unalloyed superalloy, and the effective temperature of oxidation resistance of the alloyed layer can be achieved to 1100 °C. Conversely, the oxidation resistance of the other EDA specimen alloyed with negative electrode polarity is even worse than that of the unalloyed superalloy.     

Research on graphite powders used for HTR-PM fuel elements

Different batches of natural graphite powders and electrographite powders were characterized by impurity, degree of graphitization, particle size distribution, specific surface area, and shape characteristics. The graphite balls consist of proper mix-ratio of natural graphite, electrographite and phenolic resin were manufactured and characterized by thermal conductivity, anisotropy of thermal expansion, crush strength, and drop strength. Results show that some types of graphite powders possess very high purity, degree of graphitization, and sound size distribution and apparent density, which can serve for matrix graphite of HTR-PM. The graphite balls manufactured with reasonable mix-ratio of graphite powders and process method show very good properties. It is indicated that the properties of graphite balls can meet the design criterion of HTR-PM. We can provide a powerful candidate material for the future manufacture of HTR-PM fuel elements.     

层状淤沙对混凝土重力坝地震响应的影响分析

本文研究了不同厚度淤沙对混凝土重力坝地震响应的影响以及一定厚度层状淤沙的不同分布形式对混凝土重力坝的地震响应的影响。基于饱和多孔液固两相介质的压力波动方程,设层状淤沙各层厚度不同,将层状淤沙分为三种不同分布形式,在每种分布形式每层的物理参数相同和物理参数不同两种情况下,确定了淤沙对混凝土重力坝地震响应的影响大小。通过算例分析表明,相同物理性质不同的分布形式对地震响应的影响不显著,而不同的分布形式对坝体的地震响应影响较大。     

坝址区垂直温度场及其水文地质意义——以湖北溇水江坪河水电站为例

江坪河水电站坝址区钻孔内分层水温随埋深增大而上升,钻孔孔底水温17.16℃~19.83℃为所处河湾地块岩溶地下水代表性水温,钻孔顶面水温15.88℃~16.30℃与河水水温15.81℃相近,反映了坝址区河水位比下伏岩溶水位高,部分河水下渗补给下伏岩溶水。通过比较得出,左岸ZK17与右岸ZK19一线,河水对岩溶地下水下渗补给比下游ZK79、ZK36地段强烈。分层测温这种简单易行的研究分析方法对具有复杂水动力场的同类型岩溶峰丛峡谷建坝有一定参考意义。     

Epsilon-near-zero or mu-near-zero materials composed of dielectric photonic crystals

We theoretically demonstrate that at certain frequencies two-dimensional dielectric photonic crystals （PCs） may be regarded as either epsilon-near-zero or mu-near-zero materials. We show that the transmission through a slab of such materials upon normal incidence is normally non-unity and decays with slab thickness. However, when the incident angle increases slightly, the transmittance experiences a dramatic increase due to the Brewster effect. The combination of the tunneling and resonance effects makes such materials good candidates for almost perfect bending waveguides and cloaking in waveguides. The zero index also enables applications of focusing and directive emission. At last, the distinction between the single-zero and double-zero media is discussed. In all of the above results, the numerical simulations perfectly match with theoretical predictions from the effective medium analysis.     

基于DS18B20的温度测量系统

以温度的采集处理和显示为目的,研究了基于AT89S51单片机的温度检测及显示的设计方法,给出了硬件和软件系统设计,包括温度传感器芯片的选取、单片机与温度传感器的接口设计以及实现温度采集和数据传输的软件设计。该系统结构简单,成本较低,体积小,测温范围为-55℃～125℃,可以应用在很多温度检测领域。     

基于TL494的单闭环温度控制系统的设计

针对传统温度控制系统设计复杂的缺点,提出了一种新的温度控制设计思路。以TL494为控制单元,采用AD590为温度传感器,组成温度闭环控制系统.该系统具有结构新颖、电路简单和控制方便等优点。实际运行结果表明,该系统控制精度高、运行稳定,控制效果良好。     

串口通信技术在气象传感器网络化系统中的应用

介绍一种基于串口通信的远程气象监控系统的设计方案.温度补偿和测量系统由DS18B20传感器和ADUC812单片机组成,利用VC+ +6.0开发串口通信、数据处理和显示程序,并较为详尽地分析了系统在实现中涉及的关键技术:多线程处理技术、数据库访问技术和Socket通信技术.     

基于改进遗传算法的FNNPID控制器在温度控制系统中的应用

根据温度控制系统的特点,为提高其控制质量,设计了一种模糊神经PID控制器。该控制器在温度偏差大时采用模糊神经控制,偏差小时采用模糊神经PID控制,由模糊控制开关保证两种控制方法的平滑过渡,用改进的遗传算法优化网络参数。仿真实验表明采用该控制方法系统响应速度更快、超调更小、精度更高、适应性更强。     

基于程序升温法保留时间预测的气-质联用系统构建虚拟实验室

在气-质联用技术的理论研究及实验的基础上,采用Flash 8.0和ActionScript 2.0编程技术构建开放式网络气-质联用系统虚拟实验室。以若干有机物为考察对象,根据程序升温色谱法(PTGC)中保留值与温度及流速的关系,构建了不同色谱分析条件下保留参数的预测模型,同时利用Flash组件技术,构建与虚拟实验配套的气-质联用系统虚拟工作站。