熔融石英耐火材料

阐述了熔融石英耐火材料的主要性能与应用领域。     

MgO／Ni系梯度功能材料的设计与制备

对ＭｇＯ／Ｎｉ系梯度功能材料（ＦＧＭ），分别用实验和微观力学模型测定和计算了用于热应力缓和设计的各物性参数。讨论了两种结果之间存在差异的原因。用有限元方法模拟了制备过程中ＦＧＭ的热应力，得到ＭｇＯ／Ｎｉ系ＦＧＭ的综合设计准则。按设计结果进一步调整粉末工艺性质，成功地烧制出ＭｇＯ／Ｎｉ系ＦＧＭ。     

低熔点合金填充聚合物材料断口形貌研究

研究了合金元素、加工温度、金属含量、第三组分对低熔点金属填充聚合物材料断口形貌的影响。实验结果表明:不同的合金对体系的影响很大,低分子量、低结晶性聚合物,高的成型加工温度可提高材料的相容性。     

我国金属阳极隔膜法烧碱发展现状与对策

详细介绍了我国氯碱工业采用金属阳极隔膜法制烧碱的现状及与世界先进水平的差距。提出了包括大力进行以节能为重点的技术改造；调整烧碱产品规格；彻底淘汰和转换石墨阳极隔膜法；推广先进的扩张金属阳极隔膜电解技术以及结合我国国情有计划地发展离子膜法制烧碱技术等改造措施及预期效果。     

Outlook on fertilizer use efficiency in the tropics

In this paper efficiency of applied fertilizers under tropical conditions is examined. Understanding of the fertilizer efficiency is particularly important for the developing countries mainly because there is need for enhancement of crop yields at a reduced cost. Many of the soil, plant and climatic factors of the tropical regions that contribute to the efficiency of the applied fertilizers have been discussed. Many of the tropical soils are acidic in nature and in these soils efficiency of applied fertilizer is relatively poor, mainly because plant roots are unable to grow and function to their fullest extent in utilizing the soils available nutrients. To enhance yield potentials there is need for understanding of interaction between crop species and soil and climatic variables. Incorporation and adoptation of a suitable application time can greatly enhance efficiency of urea form of nitrogen. Research findings in tropical soils have shown that an initial broadcast application of P and subsequent band treatment is more effective than either method of application alone. Current crop yields in tropical countries are far below the known yield potentials. Such low production potentials are attributed to the lack of suitable crop germplasms and understanding of improved agronomic practices. Intensification of research activities in fertilizer use efficiency in tropical countries is suggested.Senior author formerly was a Research Advisor to EMBRAPA/IICA/World Bank Program in Brazil.     

纳米SiO2粉体的制备与研究

纳米SiO2粉体的制备是以硅酸钠和盐酸为原料，添加适宜的稳定剂(非离子表面活性剂)和分散剂，在适宜的pH值和温度下，采用化学沉淀法合成。研究表明，要得到性能优良纳米的SiO2粉体，最佳工艺条件为：温度20～40℃，pH=6，反应液质量浓度P1=20g／L，P2=1．20g／L，反应时间15min。结果表明：制备的纳米SiO2粒径30～50nm，比表面积大，分散性好，质量优良，可达到产业化的生产。     

Evidence for non-site-isolation in ZSM-5 from ion-exchange and catalytic studies

Ion exchange of HZSM-5 samples with alkali metal cations, using metal chloride solutions, results in partially exchanged zeolites, MHZSM-5, M = Li, Na, K or Cs. The degree of exchange is found to increase with increasing ionic radius of the cations. The catalytic properties of the alkalized zeolites were evaluated using the reaction conditions under which the catalytic activity of the HZSM-5 samples in terms of n-hexane cracking is proportional to the aluminium content. From the residual catalytic activity exhibited by the Na-, K- and CsHZSM-5 samples it is concluded that each of the larger Na⁺, K⁺ and Cs⁺ ions is influencing more than one AlO ₄ ^– tetrahedron, implying that the aluminium sites in ZSM-5 are not isolated. The ion-exchange results are then interpreted in terms of non-isolated aluminium sites. The ion-exchange and catalytic properties of the zeolites as a function of aluminium content are also discussed.     

Organic-inorganic hybrid materials from a new octa(2,3-epoxypropyl)silsesquioxane with diamines

Hybrid materials based on a new polyhedral oligomeric silsesquioxane, octa(2,3-epoxypropyl)silsesquioxane (OE) with diamines of 4,4′-methylenedianiline (DDM) and 5-trifluoromethyl-1,3-phenylenediamine (FPA) were prepared and characterized. OE was synthesized from cage-structured octaallylsilsesquioxane (OA) with m-chloroperbenzoicacid. The FTIR studies suggested that the N-H bond in diamines was not completely reacted with epoxy group due to steric hindrance and also extensive hydrogen bonding existed in the hybrid materials. The retention of the cage structure in the prepared hybrid materials was suggested by the FTIR and ²⁹Si NMR studies. The OE/FPA hybrid materials had superior thermal/mechanical characteristics than the OE/DDM due to the higher rigidity of the FPA than that of DDM or the silicon-fluorine interaction enhancing crosslinking reaction or hydrogen bonding. The prepared OE/FPA had a T_g of 170 °C, which was higher than diglycidyl ether of bisphenyl A (DGEBA)/DDM at the same stoichiometric ratio. It also had excellent thermal, mechanical, and dielectric characteristics with high storage modulus of 1.8 GPa (30 °C) and 0.3 GPa (250 °C), low coefficient of thermal expansion of 86 μm/m °C, and dielectric constant of 2.19. Thus, it can be high performance materials with potential applications for electronic packaging.     

Synthesis and Characterization of Al-MCM-41 and Al-MCM-48 Mesoporous Materials

A novel route in the synthesis of Al-MCM-41 and Al-MCM-48, using tetraethoxysilane (TEOS) and sodium aluminate (NaAlO₂) as Si and Al source has been obtained. The effect of surfactant nature and the synthesis conditions such as surfactant/Si ratio and hydrothermal treatment time on the formed mesostructure regularity has been studied. Different methods of template removal have also been evaluated. The samples were characterized by X-ray diffraction, nitrogen physisorption, FT-IR, and solid-state MAS NMR spectroscopy.     

铝箔纸胶粘剂的制备

由醋酸乙烯和丙烯酸酯所制得的共聚物，能够极大地提高乳液对铝箔和纸张之间的粘合力，通过调整保护胶体聚乙烯醇的用量和增塑剂邻苯二甲酸二丁酯在反应过程中的不同加入方式，可以控制和生产所需要的乳液粘度，流平剂的加入，则改良了乳液在铝箔上胶时的流平性。