提高润滑油基础油氧化安定性的组合工艺

以生产润滑油基础油的老三套工艺为基础，开发了改善油品氧化安定性的组合工艺。该工艺的主要特点是包括一步络合脱氮过程。实验证明，该组合工艺既可以有效地提高基础油的氧化安定性，又能降低溶剂精制深度，提高基础油收率。     

Homogeneous Lyapunov function for homogeneous continuous vector field

The goal of this article is to provide a construction of a homogeneous Lyapunov function associated with a system of differential equations , under the hypotheses: (1) vanishes at x = 0 and is homogeneous; (2) the zero solution of this system is locally asymptotically stable. Moreover, the Lyapunov function tends to infinity with x, and belongs to , with as large as wanted. As application to the theory of homogeneous systems, we present two well known results of robustness, in a slightly extended form, and with simpler proofs.     

Microstructure and creep of eutectic indium/tin on copper and nickel substrates

The behavior during creep in shear of eutectic indium-tin joints on copper and nickel substrates was examined in order to determine the effect of creep deformation on the microstructure of the alloy. Primary creep was absent in all the samples tested. The stress exponent at 20° C was much higher for samples on nickel than for those on copper, indicating a different creep deformation mechanism. Also, the microstructure within the indium-tin joints differed significantly with a change of substrate. Samples with a nickel substrate showed a colony microstructure that was not observed in those with a copper substrate. Thus, eutectic morphology is important in determining deformation mechanism during creep. The microstructure within the joints in tested and untested regions of the samples was effectively the same. This is quite distinct from the behavior of eutectic lead-tin observed in previous work. Lead-tin formed a recrystallized band of material along a region of concentrated shear deformation. While the deformation pattern in the indium-tin samples appeared to be the same as for lead-tin, the microstructural changes did not occur. This implies that the behavior observed in lead-tin is not universal to eutectic alloys.     

助模板剂对MCM—41分子筛孔结构和性能的影响

在硅酸钠－硫酸铝－十六烷基三甲基氯化铵－水体系中，加入不同类型，如正庚烷、三甲基苯和十二胺的有机助模板剂（简称助剂）进行ＭＣＭ－４１分子筛的合成试验，并用ＸＲＤ、ＩＲ及Ｎ２吸附等方法考察了助剂对ＭＣＭ－４１分子筛孔径、热稳定性及酸性的影响。结果表明，十二胺助剂对ＭＣＭ－４１分子筛的孔径影响最大，但热稳定性较差，相比之下，三甲基苯助剂合成的ＭＣＭ－４１分子筛具有孔径大、热稳定性好和酸性特征较好的特点。     

SOME NEW ASPECT OF LYAPUNOV TYPE THEOREMS FOR STOCHASTIC DIFFERENCE EQUATIONS WITH CONTINUOUS TIME

Some new Lyapunov type theorems for stochastic difference equations with continuous time are proven. It is shown that these theorems simplify an application of Lyapunov functionals construction method.     

Thermal properties and crystalline structure of liquid crystalline poly(ethylene terephthalate‐co‐2(3)‐chloro‐1,4‐phenylene terephthalate)

Thermal properties and crystalline structure of liquid crystalline (LC) poly(ethylene terephthalate‐co‐2(3)‐chloro‐1,4‐phenylene terephthalate) [copoly(ET/CPT)] were investigated using differential scanning calorimetry (DSC), thermogravimetry (TGA), limiting oxygen index (LOI) measurement, electron dispersive X‐ray analysis (EDX), X‐ray diffractometry, and infrared spectrometry (IR). The thermal transition temperatures of copoly(ET/CPT) were changed with the composition. Copoly(ET/CPT) showed two thermal decomposition steps and the residues at 700°C and LOI values of copoly(ET/CPT) were almost proportional to its chlorine content. The activation energy of thermal decomposition of LC units was very low compared to that of poly(ethylene terephthalate)(PET) units. Crystal structure of copoly(ET/CPT) (20/80) was of triclinic system with the lattice constants of a = 9.98 A?, b = 8.78 A?, c = 12.93 A?, α = 97.4°, β = 96.1°, and γ = 90.8°, which is very close to that of poly(chloro‐p‐phenylene terephthlate) (PCPT) with the lattice constants of a = 9.51 A?, b = 8.61 A?, c = 12.73 A?, α = 96.8°, β = 95.4°, and γ = 90.8°. When copoly(ET/CPT)(50/50) was annealed at 220°C in vacuum, crystallization induced sequential reordering (CISR) was not observed but the heat of fusion was slightly increased due to the increase of the trans isomer content in PET units. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1286–1294, 2002; DOI 10.1002/app.10451     

动态矩阵控制系统稳定域的根轨迹分析

本文使用根轨迹技术从理论上分析了纯滞后工业过程参数变化对系统稳定性的影响,得到了一个与设计参数有关的稳定域,从而为设计参数自动整定提供了参考。     

Mean-square stability for discrete bilinear systems in Hilbert space

A discrete system is uniformly mean-square stable if uniform convergence is preserved between input and state correlation sequences, and if nuclearity is preserved between the input and state correlation limits. This paper supplies a contraction-free condition ensuring mean-square stability for infinite-dimensional bilinear systems evolving in a separable Hilbert space.     

Effect of the particle size ratio on the conductivity of conductor-insulator powder composites: Numerical simulation

A theoretical method for determining the percolation limit and effective conductivity of composites based on polydisperse mixtures of insulator and conductor powders is proposed. The effect of the particle size ratio between the insulator and conductor on the percolation limit and effective conductivity is studied. Numerical simulation of the microstructure, effective properties, and percolation limit in composites is discussed. __________ Translated from Poroshkovaya Metallurgiya, Vol. 46, No. 1–2(453), pp. 31–40, 2007.     

大红山铜矿岩体结构调查分析

大量工程实践已证明岩体结构是控制岩体稳定性的重要影响因素。为此，以大红山铜矿为研究背景，在选定有代表性调查地段的基础上，引入详细观测线法对其岩体结构进行了详细调查与统计。分析结果表明：调查区域内巷道岩体节理裂隙比较密集和发育，主要发育有倾向N53E、走向N37W、倾角53°，倾向W26S、走向N36W、倾角68°；倾向E1S、走向NIE、倾角89°的三组优势结构面，其中优势结构面第二组和第三组构成不稳定块体，并且断层及软弱夹层比较发育，加剧了巷道的破碎程度，对巷道围岩的稳定性有控制作用。最后提出了在巷道施工中密切注意围岩稳定性变化，避免工程事故的发生的建议。