The fabrication of ZnO/MgO multilayer films on Si (1 1 1) by PLD

ZnO/MgO multilayer thin films were fabricated on Si (1 1 1) substrates by pulsed laser deposition (PLD) at 600 °C for 30 min. The oxygen pressure and laser repetition were kept at 20 Pa and 5 Hz, respectively. The PL measurements suggest that the UV peaks have a blue excursion of 4 nm from 379 to 375 nm, compared with ZnO films. The XRD analysis indicates that the position of ZnO (0 0 2) peaks from ZnO/MgO multilayer films have about 0.12° shift from 34.421°, that of ZnO films, to 34.545°. From TEM images, the thickness of the films is about 200 nm. By HRTEM and SAD images, the crystal phases and the polycrystalline state were observed in the multilayer films.     

Structures and properties of [CoPt/Ag]_n multilayer films

In recent years there has been considerable interest in atomically ordered L10-CoPtfilms as potential materials for ultrahigh density magnetic recording (UDMR) media[1].The L10 phase CoPt alloy has high anisotropy constant of 107—108 erg/cm3, which is ofcrucial importance for UDMR media with a small grain size below 10 nm, because highmagnetocrystalline anisotropy is needed to create a barrier to thermally activatedswitching of the magnetization[2, . The as-deposited CoPt film with equi…     

Structures and properties of [CoPt/Ag]<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript> multilayer fims

The magnetic properties and structures of [CoPt/Ag] _n , multilayer films deposited by DC magnetron sputtering have been studied. During the deposited process, two kinds of deposited sequences, that is Ag layer (FDAG) first deposited or CoPt layer (FDCP) first deposited, have been chosen. The results show that the microstructures and coercivities were strongly influenced by the deposited sequence and the thickness of films. The coercivities of [Ag/CoPt] _n with FDAG are obviously higher than those of [CoPt/Ag] _n with FDCP. Especially, when the thickness of films is 8 nm, the difference of coercivities between the FDAG film and the FDCP film is the largest. It is possibly because Ag plays a role of underlayer in FDAG multilayers, which can induce both the transformation from fcc to fct and the oriented growth along c-axis. In addition, δM curves reveal that the [CoPt/Ag]₈ multilayer, film has a lower intergrain interaction than the CoPt/Ag bilayer film.     

纳米硬质薄膜的研究进展

介绍了纳米硬质薄膜的概念、设计思想、超硬机制、制备技术及工艺、性能、应用前景，综述了近几年来国内外纳米硬质薄膜材料研究的最新进展，对纳米硬质薄膜的发展趋势提出了一些看法。     

纳米多层膜的电性能及表面形貌

用热蒸发沉积和自然氧化法制备纳米量级的Al／Al2O3及Cr／Cr2O3薄膜和多层膜．本文采用三点法测定了常温、低温下的U—I特性，发现常温、低温下纳米量级的Al／Al2O3及Cr／Cr2O3薄膜具有类似负阻的特性。SEM检测表明，薄膜表面均匀，薄膜的厚度和称重法所得的厚度基本相符．AFM和STM观察表明薄膜表面存在着岛状结构，表面粗糙度在纳米尺度范围内。     

不同底层(Ag, Ti, Cu, Pt)对[Fe/Pt]n多层膜磁性的影响

利用磁控溅射的方法, 在热玻璃基片上制备了[Fe/Pt]n多层膜, 经不同温度真空热处理后, 得到L10有序结构的FePt薄膜(L10-FePt).实验结果表明 [Fe/Pt]n多层膜结构可使FePt薄膜的有序化温度由500 ℃降到350 ℃, 350 ℃退火20 min后其平行膜面矫顽力可达到421.8 kA·m-1.同时以Ag, Ti, Cu和Pt做底层, 利用[Fe/Pt]n多层膜结构制备了FePt薄膜, 磁性和X射线衍射结果表明 与[Fe/Pt]n多层膜相比, 四种底层均没有进一步降低FePt薄膜的有序化温度, 其中Ag做底层对[Fe/Pt]n多层膜退火后的平行膜面矫顽力影响较小, 但能够提高其垂直磁各向异性;其他底层均会降低[Fe/Pt]n多层膜在高温退火时的平行膜面矫顽力, 且对其垂直磁各向异性无改善作用.     

Approximate Feedback Linearisation Using Multilayer Neural Networks

In this paper we introduce the approximate feedback linearisation using multilayer feedforward neural networks. We propose to approximate a basis of the one-dimensional codistribution of an affine nonlinear system with the derivative of a multilayer neural network [6] and form a change of coordinates with n multilayer neural networks [5]. In this paper we will prove that the transformation can define a local diffeomorphism, with which a local stabilising feedback law can be designed for a kind of non-linearisable nonlinear systems.     

CN<em>x/TiN多层复合涂层抗水蚀性能的研究

采用多弧-磁控溅射镀膜机在不锈钢2Cr13衬底上沉积CN_<em>x/TiN多层复合涂层。利用光电子能谱仪(XPS)和透射电子衍射(TED)对涂层的组成和结构进行分析。利用自行研制的高压水蚀试验装置对不锈钢、高铬铸铁、司太立合金以及CN_<em>x/TiN多层复合涂层的抗水蚀性能进行对比试验,最后对涂层的水蚀失效机理进行了探讨。试验结果表明:CN_<em>x/TiN多层复合涂层具有较高的硬度、附着力、抗热冲击性能以及优异的抗水蚀性能,是一种优良的汽轮机末级叶片抗水蚀用涂层。     

Development of a system for measurement of permeability of aroma compounds through multilayer polymer films by coupling dynamic vapour sorption with purge‐and‐trap/fast gas chromatography

A system for measurement of permeability of aroma compounds through laminated polymer films was constructed by combining dynamic vapour sorption (DVS) with purge‐and‐trap/fast gas chromatography (P&T–fGC). Data validation was achieved by measuring the permeability of limonene across an HDPE film (film C) and comparing the permeation data with the literature values. The general applicability of this system, as well as its potential for simultaneous measurement of permeability of multiple aroma compounds, was demonstrated by measuring the permeability of limonene and ethyl butyrate as single permeants or as co‐permeants under different environmental conditions (at 25°C, 30°C or 35°C and 0% or 75% RH) through three different multilayer polymer films (film A, HDPE/EVOH/HDPE/HDPE; film B, HDPE/nylon/HDPE/HDPE; film C, HDPE/HDPE). The results showed that the aroma barrier performance of plastic films was determined by the polymer composition and was affected by various factors, such as temperature and the presence of other co‐permeants. Simplicity, speed and accuracy were some of the attractive features of this system, which indicates its potential as a useful tool that could be applied in the food industry for screening or selection of appropriate packaging materials for specific applications. Copyright © 2004 John Wiley & Sons, Ltd.     

网络控制论的多层多重视点模型体系研究

建模分析是网络控制论中重要的分析方法,传统的模型不能全面地描述并分析网络控制论系统中的复杂问题。首先提出了多层多重视点模型体系;然后从网络控制论系统模型的分类、多层多重视点模型体系和建模的一般步骤3个方面,详细阐述了网络控制论的多层多重视点模型体系;通过实例表明:多层多重视点模型体系具有全局性、清晰性和主动性的特点,是分析网络控制论系统的一种有效方法。