CATV系统用的外调制光发射机

文章介绍了ＣＡＴＶ系统用的外调制光发射机，并对包括固体激光器和外调制器在内的外调制光发射机原理、失真、性能、应用等方面做较详细的阐述。     

注入种子CuBr激光器中的光谱控制

报道了采用注入种子方法．对ＣｕＢｒ激光器进行激光模式控制的实验结果。实现了单纵模ＣｕＢｒ激光脉冲的注入放大，获得了功率为１００ｍＷ水平的窄线宽铜激光辐射．在理论上分析了短脉冲高增益激光器中注入种子过程，讨论了在注入种子ＣｕＢｒ激光器中进行光谱控制的实验结果．     

铸造镍基K3合金的激光熔覆开裂及工艺研究

研究了铸造镍基Ｋ３合金的激光熔覆过程，分析了原始组织及激光熔覆工艺参数对熔覆裂纹形成的及作用；探讨了使用激光熔覆技术对损伤的Ｋ３合金叶片进行修复的可能性。研究结果表明，Ｋ３合金中沿界分布的低熔点共晶及碳化物是引起激光熔覆开裂的主要因素，采用较高的功率密度和较快的扫描速度进行激光熔覆，可减少热影响区范围，明显地抑制熔覆裂纹的产生。     

用于水下三维视觉传感的新型空间差频扫描测量法

激光扫描三角法是近十年发展起来的三维传感新技术,其实现扫描测量的方法可分为两类:一是采用阵列器件,用相应的同步扫描机构实现;另一则采用单通道器件,由扫描装置进行步进扫描实现。虽然这种技术在陆地及空气系统中已得到广泛应用,但在水下却存在着许多问题。本文提出了一种新型空间差频扫描测量方式,并对扫描测量原理、测量周期、分辨率及速率进行了深入讨论,最后的应用结果显示了这种新型方式用于水下三维传感的特殊优越性。     

激光对改变胰岛致免疫性的影响

新生猪胰岛样细胞团经准分子激光照射预处理后，其免疫原性明显降低，表明经激光预处理，有可能延长移植物存活时间。     

激光辐照对冷冻精子活率和活力的影响

分别用7.48J/cm~2和14.96J/cm~2能量密度的氦氖激光辐照23份液氮冷冻前人的精液,冻贮三个月后复温查精子活率和毛细管穿透高度。结果:经7.48J/cm~2剂量的激光辐照后的精子活率和穿透高度明显提高,分别平均提高10.18％和8.32mm,与未受辐照组比较差异显著(P<0.05)经14.96J/cm~2辐照组,活率较未照组降低。实验结果说明适当剂量的激光辐照能够增强精子对冷冻的耐受力,提高精子的复活率和活动力。     

Structural study of degraded ZnMgSSe blue light emitters

Using electroluminescence (EL) topography and transmission electron microscopy (TEM), we investigated the nonluminescent regions which form while current is being injected into ZnMgSSe/ZnSSe/ZnCdSe-based blue light emitters. Small dark spots were observed just after turn-on and spread out forming rough nonluminescent triangles in the <100> directions in the EL image of the active region. TEM studies showed that the small dark spots are pre-existing stacking faults originating at the substrate/epitaxial layer interface. The nonluminescent triangles were found to be a dense region of dislocation dipoles and dislocation loops. Each dipole was aligned along two <110> directions in the {111} planes. The Burgers vectors were of the type a/2<011> inclined at 45° to the (001) junction plane.     

激光对抗技术发展动态

激光对抗主要包括激光侦察告警、激光无源干扰和有源干扰，以及激光防护几方面。本文概述了激光对抗技术的发展。     

新型微光探测器滤光玻璃

系统分析了微光探测器的结构及其原理。鉴于当前器件存在的激光致盲威胁,提出了新的改进思路。着重介绍了具有特殊激光防护性能的滤光材料,并对其原料及制备、加工过程作了系统地介绍,同时给出了一些重要的性能特征。     

New Ferro Powder for Selective Laser Sintering of Dense Parts

The paper describes a new powder composition specially developed for selective laser sintering (SLS). The aim is to obtain a ferro powder that can be sintered without need for a (sacrificial) polymer binder and that results in quasi dense parts that do not need any post-processing like furnace sintering, infiltration or HIP. The powder is a mixture of different types of particles (Fe, Cu, Ni and Fe₃P). The composition and mixture ratio are justified by using phase diagrams. The powder has been tested using an own developed Nd: YAG SLS machine. The influence of process parameters (laser power, scan velocity, scan spacing and scan strategy) and the microstructural characteristics have been investigated. Attention is devoted to the binding mechanism (liquid phase sintering, through melting) and to the quality of resulting parts (density, balling effect,…).