那曲典型草地植被光谱特征分析

遥感是大尺度生态研究的重要工具之一,而地面植物群落特征与其光谱特征之间的关系是解译遥感影像的关键。地面实测数据由于其高空间分辨率和高光谱分辨率,能够准确反映地物光谱信息,可以用来指导卫星遥感解译工作,同时为遥感监测草地退化、草地模型建立等提供数据支持。选取西藏那曲地区的优势植被类型作为研究对象,利用ASD FieldSpec 3便携式光谱仪测定优势种的冠层光谱并进行比较,并取其中一种优势种测量其在不同覆盖度和不同生长期的光谱反射特点。研究结果表明:①不同植被群落冠层光谱具有特殊的光谱曲线,可见光波段光谱反射率依次是紫花针茅、小嵩草和藏北嵩草,近红外波段光谱反射率则依次是小嵩草、藏北嵩草和紫花针茅;红边位置可以识别藏北嵩草,但是不能区分小嵩草和紫花针茅;②不同覆盖度的小嵩草红边、“绿峰”位置不随覆盖度的变化而发生变化;连续统去除后得到吸收深度随覆盖度的增加而变大,吸收峰面积随覆盖度的增加而增加;③小嵩草衰退期内,在可见光波段和红边波段,冠层光谱反射率随着叶绿素含量的减少而下降,出现“红边蓝移,绿峰下降”的现象。     

Measurement of soybean fatty acids by near-infrared spectroscopy: Linear and nonlinear calibration methods

A key element of successful development of new soybean cultivars is availability of inexpensive and rapid methods for measurement of FA in seeds. Published research demonstrated applicability of NIR spectroscopy for FA profiling in oilseeds. The objectives of this study were to investigate the applicability of NIR spectroscopy for measurement of FA in whole soybeans and compare performance of calibration methods. Equations were developed using partial least squares (PLS), artificial neural networks (ANN), and support vector machines (SVM) regression methods. Validation results demonstrated that (i) equations for total saturates had the highest predictive ability (r ²=0.91–0.94) and were usable for quality assurance applications, (ii) palmitic acid models (r ²=0.80–0.84) were usable for certain research applications, and (iii) equations for stearic (r ²=0.49–0.68), oleic (r ²=0.76–0.81), linoleic (r ²=0.73–0.76), and linolenic (r ²=0.67–0.74) acids could be used for sample screening. The SVM models produced significantly more accurate predictions than those developed with PLS. ANN calibrations were not different from the other two methods. Reduction in the number of calibration samples reduced predictive ability of all equations. The rate of performance degradation of SVM models with sample reduction was the lowest.     

基于Kubelka-Munk理论光谱反射比重建算法的研究

由于常规的K/S空间的光谱反射比重建算法不能满足高精度重建光谱反射比的需求,因此基于Kubelka-Munk理论的光谱反射比重建算法被提出来.本文的重点是提出应用Kubelka-Munk理论对物体表面的光谱反射比进行重建,并针对该算法进行数学上的推导.     

打印机光谱特性化方法研究综述

目的 打印输出技术是目前国内外图像复制领域的主流技术。打印机特征化旨在建立打印机输入控制值与输出色彩信息值之间的对应关系,保证打印输出图像各像素色彩值的准确性。基于可见光谱的打印机特性化过程,以图像光谱信息作为打印机特性化过程中的色彩控制依据,可避免基于色度的打印输出过程所固有的同色异谱问题,实现图像色彩复制领域最高级别的无条件颜色匹配。在广泛文献调研的基础上,本文回顾了打印机光谱特性化方法各部分研究的发展历程,分析介绍了该领域主要研究内容及其研究现状,对打印机光谱特性化方法流程进行了较为全面的综述。方法 以Yule-Nielsen修正的光谱Neugebauer模型（YNSN模型）为典型代表,从打印机墨量限制方法、正向光谱预测模型、反向光谱分色模型以及色彩匹配评价度量4个方面,对目前基于可见光谱的打印机特性化方法研究情况进行了总结与归纳,并结合现有研究存在的问题对未来研究发展趋势进行了展望。结果 综合近几年该领域研究发展情况,认为目前打印机光谱特性化方法研究在墨量限制算法合理性、正反向建模精度等方面已经取得了较为理想的结果。然而,尽管已有20多年的广泛研究,鉴于光谱数据的高维性以及具体应用场景的多样性,导致准确而高效的实现光谱打印机特性化仍然是一个极具难度的问题,特别在建模效率提高、模型适用性增强、模型物理意义提升以及评价度量综合性能优化等方面,目前研究仍存在较大的研究发展空间。结论 打印机光谱特性化是实现图像色彩信息高保真打印复制的必要手段,其今后将继续在图像复制领域起到非常关键作用。然而,由于基于光谱的打印机特性化过程涉及光谱学及色度学理论、半色调呈色理论、最优化计算理论、人眼视觉机理、数字加网技术等多种理论与技术,故其研究具有一定的难度与挑战性。本文对打印机光谱特性化方法研究现状进行了较为深入的介绍与分析,意在使国内同行对该领域有一个较为全面的了解,以期引起更多研究者对该领域的关注。由于篇幅所限,许多问题未及深究。     

CO2探测仪近红外焦平面无效像元检测方法

针对HgGdTe探测器均匀性差、无效像元多,过多无效像元会降低碳卫星CO2探测仪红外焦平面探测器探测精度,提出了一种基于探测器性能测试数据进行无效像元筛选的方法.首先利用CO2探测仪冷光学实验设备采集暗背景数据与响应度数据,然后计算暗背景数据的DN值均值与标准差、各个像元的响应度曲线,利用直方图阈值筛选出暗像元、亮像元、不稳定像元、平均拟合偏差较大等无效像元,最终利用各种无效像元集合交并集确定最终无效像元.结果表明:基于各种无效像元集合交并集确定最终无效像元的无效像元筛选方法准确度更高.通过遍历筛选出无效像元的响应值,从而确认了无效像元筛选的合理性.     

多光谱颜色复制技术研究发展

针对基于色度的颜色再现技术存在同色异谱的问题,综述了基于多光谱的颜色复制技术框架。总结了多光谱颜色复制的7个关键技术,即多光谱颜色复制系统的设计、多光谱图像的获取、多光谱图像的融合、光谱反射率的重建、多光谱图像降维、光谱分色算法与模型开发以及光谱颜色管理技术,并指出了多光谱颜色复制技术的研究思路和前景。     

基于连续小波变换参数选择的小麦近红外光谱模型优化方法研究

为了提高模型预测精度,结合连续小波变换（CWT）的最优参数选择,优化小麦蛋白质光谱模型。对原始光谱进行CWT,利用主成分分析（PCA）选出5种小波db1、sym2、sym5、sym7、coif1;在不同尺度参数下利用偏最小二乘法（PLS）建模,确定尺度参数为15;在此基础上,利用CWT结合多元散射校正（MSC）及支持向量机（SVM）建模确定最优小波db1;在最优参数下用CWT结合无信息变量消除算法（UVE）和连续投影算法（SPA）及SVM建立预测模型,预测均方根误差为0.3930,优于CWT-UVEPLS-SVM的0.4558和CWT-SPA-SVM的0.4415,研究结果表明,CWT参数选择可有效优化近红外光谱模型。     

Virtual reflected-light microscopy

Research on better methods to digitally represent microscopic specimens has increased over recent decades. Opaque specimens, such as microfossils and metallurgic specimens, are often viewed using reflected light microscopy. Existing 3D surface estimation techniques for reflected light microscopy do not model reflectance, restricting the representation to only one illumination condition and making them an imperfect recreation of the experience of using an actual microscope. This paper introduces a virtual reflected-light microscopy (VRLM) system that estimates both shape and reflectance from a set of specimen images. When coupled with anaglyph creation, the system can depict both depth information and illumination cues under any desired lighting configuration. Digital representations are compact and easily viewed in an online setting. A prototype used to construct VRLM representations is comprised only of a microscope, a digital camera, a motorized stage and software. Such a system automatically acquires VRLM representations of large batches of specimens. VRLM representations are then disseminated in an interactive online environment, which allows users to change the virtual light source direction and type. Experiments demonstrate high quality VRLM representations of 500 microfossils.     

基于微观图像的加工表面3维形貌重建算法研究

切削加工表面由于微观不平度及镜面效应的存在,使得照射其上的光线具有多次散射及后向散射的特性,从而影响了以工件表面图像3维重建形貌的精度。提出了一种基于二向反射分布函数的表面重建算法,构造了以Hapke模型表达的金属切削表面重建方程。该算法以重建方程离散化为手段,计算出光源和物体的倾角和偏角,得到光源和物体的梯度值,最后采用全微分方程对物体表面高度进行恢复。通过对实际切削加工表面图像3维形貌重建结果与触针式测量结果的对比表明,重建形貌粗糙度轮廓贴近实测粗糙度轮廓,证明了本文算法的准确、有效性,为加工表面3维形貌的重建提供了新的思路和方法。     

Multi-angle remote sensing of forest light use efficiency by observing PRI variation with canopy shadow fraction

We show that observed co-variations at sub-hourly time scales between the photochemical reflectance index (PRI) and canopy light use efficiency (LUE) over a Douglas-fir forest result directly from sub-hourly leaf reflectance changes in a 531 nm spectral window roughly 50 nm wide. We conclude then, that over a forest stand we are observing the direct effects of photosynthetic down-regulation on leaf-level reflectance at 531 nm. Key to our conclusion is our ability to simultaneously measure the LUE and reflectance of the Douglas-fir stand as a function of shadow fraction from the “hot spot” to the "dark spot"dark spot” and a new finding herein, based on radiative transfer theory, that the magnitude of a normalized reflectance difference index (NDRI) such as PRI can vary with shadow fraction only in case the reflectance of the shaded and sunlit leaves differ in at least one of the NDRI bands.Our spectrometer measurements over a nearly 6 month period show that at a forest stand scale, only two NDRIs (both containing a band near 570 nm) vary with shadow fraction and are correlated with LUE; an NDRI with a band centered at 531 nm roughly 50 nm wide, and another near 705 nm. Therefore, we are able to conclude that only these two bands' reflectance differ between the sunlit and the shaded elements of the canopy. Their reflectance changes on time scales of a few minutes or less. Our observations also show that the reflectance changes at 531 nm are more highly correlated with variations in canopy light use efficiency when only sunlit canopy elements are viewed (the hot spot), than when only shaded elements (the dark spot) are viewed. Taken together then, these results demonstrate that the observed sub-hourly changes in foliage reflectance at 531 nm and 705 nm can only result from corresponding variations in photosynthetic rates.The importance of our results are as follows: (1) We show that variations in PRI with LUE are a direct result of rapid changes in foliage reflectance at 531 nm resulting from photosynthetic down-regulation, and can be observed at forest scales. (2) Our findings also suggest a new sensor and methodology for the direct retrieval from space of changes in forest LUE by measuring PRI as a function of shadow fraction using a multi-angle spectrometer simultaneously retrieving both shadow fraction and PRI.