Multiple Function Synchronous Optimization by PbS Quantum Dots for Highly Stable Planar Perovskite Solar Cells with Efficiency Exceeding 23%

Colloidal lead sulfide (PbS) quantum dots (QDs), which possess quantum confinement effect and processing compatibility with perovskite, are regarded as an excellent material for optimizing perovskite solar cells (PSCs). However, the existing PSCs optimized by PbS QDs are still facing the challenges of poor performance of the charge transport layers, low utilization in the near-infrared (NIR) region, and unsuitable energy level alignment, which limit the improvement of power conversion efficiency (PCE). Herein, a synchronous optimization strategy is realized via simultaneously introducing PbS QDs into SnO₂ electron transport layer and employing rare-earth-doped PbS QDs (Eu:PbS QDs) film with hydrophobic chain ligands as the NIR light-absorping layer and hole transport layer (HTL) of devices. PbS QDs effectively decrease the density of trap states by passivating defects. Eu:PbS QDs film with adjustable bandgap is employed as an absorption layer to broaden the NIR spectral absorption. The well-matched energy level between Eu:PbS QDs layer and perovskite layer implies efficient hole transfer at the interface. The successful synchronous optimization greatly elevates all photovoltaic parameters, reaching a maximum PCE of 23.27%. This PCE is the highest for PSCs utilizing PbS QDs material in recent years. The optimized PSCs retain long-term moisture and light stability.     

Deterministic Polymorphic Engineering of MoTe2 for Photonic and Optoelectronic Applications

Developing selective and coherent polymorphic crystals at the nanoscale offers a novel strategy for designing integrated architectures for photonic and optoelectronic applications such as metasurfaces, optical gratings, photodetectors, and image sensors. Here, a direct optical writing approach is demonstrated to deterministically create polymorphic 2D materials by locally inducing metallic 1T′-MoTe₂ on the semiconducting 2H-MoTe₂ host layer. In the polymorphic-engineered MoTe₂, 2H- and 1T′- crystalline phases exhibit strong optical contrast from near-infrared to telecom-band ranges (1–1.5 µm), due to the change in the band structure and increase in surface roughness. Sevenfold enhancement of third harmonic generation intensity is realized with conversion efficiency (susceptibility) of ≈1.7 × 10⁻⁷ (1.1 × 10⁻¹⁹ m² V⁻²) and ≈1.7 × 10⁻⁸ (0.3 × 10⁻¹⁹ m² V⁻²) for 1T′ and 2H-MoTe₂, respectively at telecom-band ultrafast pump laser. Lastly, based on polymorphic engineering on MoTe₂, a Schottky photodiode with a high photoresponsivity of 90 AW⁻¹ is demonstrated. This study proposes facile polymorphic engineered structures that will greatly benefit realizing integrated photonics and optoelectronic circuits.     

基于高光谱激光雷达的滞尘叶片光谱特征分析

城市绿植为城市生态系统提供自净功能, 起到净化空气以及滞尘降尘等多种环境保护作用, 而滞尘等因素也 会对绿植产生影响。为了研究滞尘对城市绿植叶片光谱特征的影响, 采集了四种常绿绿植 (八角金盘、石楠、香樟和 玉兰) 叶片样本, 使用高光谱激光雷达系统获取高光谱点云数据, 分析了滞尘对叶片光谱特征的影响。分析结果表明: 对于不同种类叶片, 滞尘对可见光波段反射率均有较大影响; 对于同种类叶片, 滞尘对近红外波段的反射率差异影响 较大, 可见光波段的反射率差异为 1.21%∼3.41%, 近红外为 1.76%∼8.49%; 线性四点内插法计算和光谱导数分析表明 滞尘对四种叶片的红边位置无显著影响; 四种叶片的叶面水含量指数 (LWI) 对滞尘的响应程度最小 (均小于 3.7%), 而 比值植被指数 (RVI) 对滞尘的响应程度最大 (除香樟外, 均大于 20.0%), 红边指数 (SDr)、简单比值指数 (SR) 和叶面叶 绿素指数 (LCI) 的响应程度稳定性较差。进一步建立了滞尘植被指数和响应程度的线性相关性拟合模型并进行了检 验, 其中以 LCI 为自变量建立的模型为最稳定拟合模型, 可表示为 y = −1.527x + 0.6597, 决定系数约为 0.88。     

Er3+/Yb3+/Tm3+/Pr3+共掺碲酸盐玻璃超宽带近红外发光性能研究

采用熔融淬火技术制备了0.2 mol% Er₂O₃、1 mo l% Yb₂O₃、0.1 mol% Tm₂O₃和x mol% Pr₆O₁₁( x=0.25、 0.3、0.35和0.4)掺杂的65TeO₂-15ZnO-10Na₂O-10WO₃系碲酸盐玻璃,通过X 射线衍射(X-ray diffraction,XRD)、差热扫描曲线(differential scanning calorimetry,DSC)对玻璃样 品的抗析晶性和热稳定性 进行了表征。结果表明,玻璃样品具备良好的抗析晶性,析晶温度和转变温度差值为140 ℃,具有较好 的热稳定性。吸收光谱结果显示,Er³⁺/Yb³⁺/Tm³⁺/Pr³⁺共掺碲 酸盐玻璃在980 nm处有较强的吸收峰,故可 以采用980 nm泵浦源对该玻璃样品进行激发。在1 200—2 000 nm近 红外波段范围,玻璃样品存在峰值中 心为1.35 μm、1.53 μm和1.8 μm 3个波段发射峰,且3个发射峰的荧光半高宽(full width at half maxima, FWHM)均大于100 nm,其覆盖了光信号传输的E、S、C和C+L 4个波段,大幅度地提高了掺铒 光纤放大器(erbium doped fiber amplifier,EDFA)的放大带宽。     

Silica shell-assisted synthetic route for mono-disperse persistent nanophosphors with enhanced in vivo recharged near-infrared persistent luminescence

Near-infrared (NIR) persistent-luminescence nanoparticles have emerged as a new class of background-free contrast agents that are promising for in vivo imaging.The next key roadblock is to establish a robust and controllable method for synthesizing monodisperse nanoparticles with high luminescence brightness and long persistent duration.Herein,we report a synthesis strategy involving the coating/etching of the SiO2 shell to obtain a new class of small NIR highly persistent luminescent ZnGa2O4∶Cr3+,Sn4+ (ZGOCS) nanoparticles.The optimized ZGOCS nanoparticles have an excellent size distribution of ～15 nm without any agglomeration and an NIR persistent luminescence that is enhanced by a factor of 13.5,owing to the key role of the SiO2 shell in preventing nanoparticle agglomeration after annealing.The ZGOCS nanoparticles have a signal-to-noise ratio ～3 times higher than that of previously reported ZnGa2O4∶Cr3+ (ZGC-1) nanoparticles as an NIR persistent-luminescence probe for in vivo bioimaging.Moreover,the persistent-luminescence signal from the ZGOCS nanoparticles can be repeatedly re-charged in situ with external excitation by a white lightemitting diode;thus,the nanoparticles are suitable for long-term in vivo imaging applications.Our study suggests an improved strategy for fabricating novel high-performance optical nanoparticles with good biocompatibility.     

聚氨酯/青铜-Sm_2O_3复合涂层的近红外吸收与发射率性能EI北大核心CSCD

以青铜（bronze）粉与Sm2O3为复合颜料,聚氨酯（PU）为黏合剂,制备了PU/bronze-Sm2O3复合涂层。系统研究了涂层的红外发射率、近红外吸收性能及力学性能。结果表明：Sm2O3的存在可有效降低涂层对1.06μm与1.54μm近红外光的反射率,青铜粉的存在可有效降低涂层在8-14μm波段的红外发射率;通过调节青铜粉与Sm2O3质量比,涂层在8-14μm波段的红外发射率可在0.422-0.782范围内调节,涂层对1.06μm与1.54μm近红外光的反射率可分别在46.8%-65.0%和49.3%-70.7%范围内调节;所制备PU/bronze-Sm2O3复合涂层具备优良的力学性能,在不同青铜粉与Sm2O3质量比下,其附着力与耐冲击强度分别可达到1级和50kg·cm。     

Atmospheric correction of optical imagery from MODIS and Reanalysis atmospheric products

In this paper we analyze the differences obtained in the atmospheric correction of optical imagery covering bands located in the Visible and Near Infra-Red (VNIR), Short-Wave Infra-Red (SWIR) and Themal-Infrared (TIR) spectral regions when atmospheric profiles extracted from different sources are used. In particular, three sensors were used, Compact High Resolution Imaging Spectrometer (CHRIS), Advanced Spaceborne Thermal Emission and Reflection radiometer (ASTER) and Landsat5 Thematic Mapper (TM), whereas four atmospheric profiles sources were considered: i) local soundings launched near the sensor overpass time, ii) Moderate Resolution Radiometer (MODIS) atmospheric profiles product (MOD07), iii) Atmospheric Correction Parameter Calculator (ACPC) generated by the National Center for Environmental Prediction (NCEP) and iv) Modified Atmospheric Profiles from Reanalysis Information (MAPRI), which includes data from NCEP and National Center of Atmospheric Research (NCAR) Reanalysis project but interpolated to 34 atmospheric levels and resampled to 0.5° × 0.5°. MODIS aerosol product (MOD04) was also used to extract Aerosol Optical Thickness (AOT) values at 550 nm. Analysis was performed for three test dates (12th July 2003, 18th July 2004 and 13th July 2005) over an agricultural area in Spain. Results showed that air temperature vertical profiles were similar for the four sources, whereas dew point temperature profiles showed significant differences at some particular levels. Atmospheric profiles were used as input to MODTRAN4 radiative transfer code in order to compute atmospheric parameters involved in atmospheric correction, with the aim of retrieving surface reflectances in the case of VNIR and SWIR regions, and Land Surface Temperature (LST) in the case of the TIR region. For the VNIR and SWIR region, significant differences depending on the atmospheric profile used were not found, particularly in the Visible region in which the AOT content is the main parameter involved in the atmospheric correction. In the case of TIR, differences depending on the atmospheric profile used were appreciable, since in this case the main parameter involved in the atmospheric correction is the water vapor content, which depends on the vertical profile. In terms of LST retrieval from ASTER data (2004 test case), all profiles provided satisfactory results compared to the ones obtained when using a local sounding, with errors of 0.3 K for ACPC and MAPRI cases and 0.7 K for MOD07. When retrieving LST from TM data (2005 test case), errors for MOD07 and MAPRI were 0.6 and 0.9 K respectively, whereas ACPC provided an error of 2 K. The results presented in this paper show that the different atmospheric profile sources are useful for accurate atmospheric correction when local soundings are not available. In particular, MOD07 product provides atmospheric information at the highest spatial resolution, 5 km, although its use is limited from 2000 to present, whereas MAPRI provides historical information from 1970 to present, but at lower spatial resolution.     

Boosting集成回归在近红外光谱定量校正中的应用

针对物性参数和近红外光谱数据之间的回归模型的建立问题,基于建立一系列回归器的思想,给出了1种用于多变量校正的Boosting-PLS算法。每个(弱/基本)回归器均建立于原校正集的1个子集上,每个子集均通过原校正集带概率重复采样的方式得到,而样本的概率则由前1个回归器的预测误差确定。大误差的样本将增大概率,以便后续的回归器更集中地对其进行训练。最终的集成回归模型则为弱回归器的加权取中值。通过1个近红外应用实例和与偏最小二乘的比较,证实了Boosting-PLS算法的优良性能,所建校正模型更精确、更稳健,对过拟合不敏感。     

基于NIR技术的PET/PVC废旧塑料分离系统

介绍了一种基于近红外探测技术的PET/PVC废旧塑料分离系统.该系统根据不同塑料对近红外光谱吸收不同的原理,结合窄带滤光片和光电传感器设计了红外检测装置,开发了以STM32F103X为核心,包括信号处理、A/D转换、控制模块、分离模块、CAN总线通信模块在内的自动鉴别分离系统.实验结果表明:该系统测量结果准确,响应速度...     

An empirical anisotropy correction model for estimating land surface albedo for radiation budget studies

Land surface albedo is one of the key parameters in the radiation budget, the hydrological cycle and climate modeling studies. It is now widely understood that large errors may occur in the estimation of surface albedo without taking into consideration the anisotropy reflectance effect, which is a general feature of the earth surface. Two major anisotropic correction methods exist for the retrieval of land surface albedo under clear sky conditions. One method involves linearly converting from top of the atmosphere (TOA) albedo to surface albedo, and another is based on the inversion of the Bidirectional Reflectance Distribution Function (BRDF) model of the surface. In the present study, a new approach that utilizes an empirical model for estimating surface albedo has been proposed for snow free land surfaces under clear sky conditions. We analyzed the bidirectional reflectance data set with numerous samples representing various land cover types, which derived from POLDER/ADEOS-1 multi-angle imagery data and distributed by MEDIAS-France. Through the analysis, an empirical relation between bidirectional reflectance and albedo was established and has been discussed in detail. The proposed model can be used for direct estimation of surface albedo from a single BRF observation when the sun-target-sensor geometry is known. No BRDF model inversion scheme is necessary. The present model has no or weak dependence on the existing land surface classifications, and is insensitive to wavelength. The theoretical absolute accuracy of the estimated albedo is approximately 0.010 for visible (0.4-0.7 μm), 0.023 for near infrared (0.7-3.0 μm) and 0.016 for shortwave (0.2-3.0 μm), respectively. Albedo consistency with viewing geometry has been verified, resulting in good agreement for albedo estimated from various viewing directions. Validation of the satellite estimated albedo derived by the proposed method, using field observations were also presented and results show it can give reasonably accurate estimation. The proposed method is expected to be a suitable candidate for practical applications of albedo estimation for sensors that do not perform multi-angle observations.