镀镍云母导电复合材料的研究

对云母粒子化学镀镍及以LDPE为基材,镀镍云母粒子为填料制备的导电复合材料进行研究。认为此种导电复合材料只有质量轻、强度大及良好的导电等性能。     

Systematic analysis of neutron yields from thick targets bombarded by heavy ions and protons with moving source model

A simple phenomenological analysis using the moving source model has been performed on the neutron energy spectra produced by bombarding thick targets with high energy heavy ions which have been systematically measured at the Heavy-Ion Medical Accelerator (HIMAC) facility (located in Chiba, Japan) of the National Institute of Radiological Sciences (NIRS). For the bombardment of both heavy ions and protons in the energy region of 100–500 MeV per nucleon, the moving source model incorporating the knock-on process could be generally successful in reproducing the measured neutron spectra within a factor of two margin of accuracy. This phenomenological analytical equation is expressed having several parameters as functions of atomic number Z_p, mass number A_p, energy per nucleon E_p for projectile, and atomic number Z_T, mass number A_T for target. By inputting these basic data for projectile and target into this equation we can easily estimate the secondary neutron energy spectra at an emission angle of 0–90° for bombardment with heavy ions and protons in the aforementioned energy region. This method will be quite useful to estimate the neutron source term in the neutron shielding design of high energy proton and heavy ion accelerators.     

新型阳离子聚合物NCP的合成及应用

介绍了用高分子反应法在固态条件下合成高阳离子度阳离子聚合物NCP的方法,确定了其最佳反应条件,测定了聚合物阳离子度和反应效率.采用L9（34）正交试验法得出合成NCP的最佳反应条件为：聚合物与阳离子化试剂质量比为11：3;催化剂用量为1.072%,反应时间为2.5 h;反应温度为80℃.实验结果表明,在反应体系中加入催化剂和少量有机或无机溶剂可显著提高反应速率和效率;使用少量润湿剂,可最大限度地限制副反应,造成反应部位的局部浓度高,提高反应效率.阳离子聚合物NCP可作为增粘降滤失剂用于配制正电性钻井液,效果优良,且耐温性能良好,同时基于阳离子与阴离子聚合物在溶液中生成凝胶状沉淀物的特性,NCP还可用于解决注聚区块生产井产出水中含高浓度聚合物的问题.     

新型处理药剂（EP-110）处理各种重金属离子的实验研究

各行各业生产过程中会产生大量废水,重金属离子污染物是其中的重要控制指标,传统的处理方法不能完全解 决这类污染。本文通过大量的实验数据,对新型的处理药剂(EP-110)处理各种重金属离子的性能做了全面的测试、分析,并 提出了使用方法。     

Crystalline and viscoelastic properties of branched polyethylenes synthesized using bidentate nickel (II) catalyst

In this work, five branched polyethylenes with different branching units were synthesized using bidentate nickel (II) catalyst containing -diimine ligands. For comparison, one linear polyethylene was also prepared using tridentate iron (II) catalyst containing -diimine ligand. The crystalline structure of the polyethylenes was investigated using X-ray diffraction (XRD) and polarized optical microscope. The crystalline properties were also measured by differential scanning calorimeter (DSC). Viscoelastic properties of the polyethylenes were investigated using rheometric dynamic analyzer. The DSC and XRD results showed that highly branched polyethylenes exhibit no melting points and no predominating crystalline forms, while the linear polyethylene exhibits clear orthorhombic (110) and (200) reflections on XRD pattern and a clear melting point at 118 °C. The viscoelastic properties of the branched polyethylenes were very complicated due to the combined effect of the molecular weight difference and the degree of chain branching as well as the branching structure.     

有机镍化合物催化烯烃聚合的研究进展

综述了有机镍化合物如烯丙基镍、乙酰丙酮镍、茂镍、二亚胺镍等催化烯烃聚合的研究进展。有机镍化合物可催化烯烃、α-烯烃(如乙烯、丙烯等)的齐聚及聚合、催化极性单体(如甲基丙烯酸甲酯、降冰片烯等)以及位阻较大的环烯烃、取代二烯烃、苯乙烯等的均聚和共聚。     

高铝钛镍基合金晶粒度的研究

研究了对高温镀镍基高温金晶粒度的影响因素。以便减少晶粒度不合格废品，结果表明，在冶炼工艺和变形量一定的条件下，碳含量、高温带加热时间和终轧温度是影响晶粒度的关键因素。     

Density measurements on levitated liquid metal droplets

Electromagnetic levitation is a useful tool for measuring thermophysical properties of high-temperature melts such as liquid metals. Due to its noncontact nature, the undercooled regime is also accessible. Density and thermal expansion of a levitated drop can be derived from volume measurements, if its mass is known. Assuming cylindrical symmetry, the volume of a drop can be determined from its cross section. Using photography, such measurements on liquid metals have been performed in the past. Here we present an improvement of this method, which replaces the photographic camera with a CCD videocamera and subsequent digital image processing. This reduces the time effect required to obtain the results and allows one to average over disturbing surface oscillations. The specific problems of digital image processing, namely resolution and edge detection, are addressed and results on nickel are presented.Paper presented at the Fourth International Workshop on Subsecond Thermophysics, June 27–29, 1991, Köln, Germany.     

In situ13C NMR study of tert-butanol interaction with moderately concentrated sulfuric acid

An in situ NMR study of tert-butanol dehydration in 95 and 85% sulfuric acid did not indicate the formation of tert-butyl cations as active reaction intermediates. Instead, only NMR lines from oxonium ions under the condition of fast exchange with water and the acid were observed. It is most likely that, in the concentrated acid, the active intermediates of this reaction are represented by tert-butyl sulfuric ester which probably is a precursor of invisible tert-butyl carbenium ions representing short-lived excited or transition states.     

Electrodeionisation 3: The removal of nickel ions from dilute solutions

The removal of nickel ions from dilute solutions using a process that combines an ion-exchange bed with electrodialysis has been studied. The main aspects include: the concentration of nickel ions in the diluate, the voltage over the cell and the current density distribution along the ion-exchange bed. The current density distribution provides insight into the state of the bed as it is simultaneously loaded with Ni²⁺ and regenerated with an electric potential difference applied perpendicular to it. A simple model is used to describe the state of the bed and the quantity of nickel removed from it as a function of time. Under specific conditions the precipitation of metal hydroxides is observed in the compartment containing the ion-exchange bed. The results show that hydroxide precipitation is related to the nickel concentration in solution and the electric potential gradient across the bed.