汽车覆盖件成形过程数值模拟研究

本文介绍汽车覆盖件成形过程有限元模拟两个软件ＩＴＡＳ—３Ｄ和ＤＹＮＡＭＩＣ的最新研究成果，基本原理和有关接触搜索、摩擦和拉伸筋模型等关键技术。并有两个应用实例     

碱土金属在萃取剂与树脂间反应平衡常数的测定

研究了碱土金属离子在Ｄ００１树脂与８－羟基喹啉三氯甲烷溶液间的平衡常数Ｏ－ｔＫ的测定。其值依Ｍｇ、Ｃａ、Ｓｒ、Ｂａ次序减小。并得出萃取剂浓度［ＨＡ］。与金属离子在两相分配的关系。     

Physicochemical investigation of the decomposition products of ammonium metal carboxylates: ammonium ferric citrate hydrate

The thermal decomposition up to 400 °C of ammonium ferric citrate hydrate, of unknown structure and formula weight, was studied by thermogravimetry, differential thermal analysis, infrared (IR) spectroscopy and X-ray diffractometry. The possible identities of the formula weight and the intermediate products of calcination are discussed. The results revealed that the parent material is amorphous and contains two moles of water and two moles of ammonia. Decomposition takes place via six weight-loss processes, three endothermic (90–230 °C) and three exothermic (240–298 °C), leading eventually to the formation of Fe₂O₃. The intermediate solid products are mainly unstable amorphous oxycarbonates, as indicated by X-ray and IR spectroscopies. The gas-phase decomposition products identified by IR spectroscopy are NH₃, CO₂, CO, CH₃COCH₃, CH₄ and NH₄OH. Surface area measurement and scanning electron microscopy showed that Fe₂O₃, the final product at 400 °C, hada surface area of 40 m²/g and good crystalline and porous character.     

Preparation,characterization, and adsorption properties for metal ions of a novel chelating resin containing sulfoxide and diethylene glycol

A novel chelating resin containing sulfoxide and diethylene glycol, poly{4‐vinylbenzyl‐[2‐2‐(hydroxyethyl)ethoxyl]sulfoxide} (PVESO) was synthesized using chloromethylated polystyrene (PS‐Cl) as material. Its structure was characterized by elemental analysis, infrared spectra, and scanning electron microscopy (SEM). The adsorption capacities of the resin for Hg²⁺, Ag⁺, Cu²⁺, Zn²⁺, and Pb²⁺ at various pH values were determined. The maximum adsorption capacities for Hg²⁺ and Ag⁺ were 1.56 and 0.75 mmol g^?1 respectively. The resin had high selectivity for Hg²⁺ and Ag⁺ over the pH range 1.0–7.0. The adsorption capacities for Hg²⁺ and Ag⁺ under competitive condition were also determined by batch experiment method. In addition, the adsorption kinetics of the resin towards Hg²⁺ at different temperatures was also investigated. The results showed that the adsorption rate was governed by film diffusion at 20°C and 25°C, by particle diffusion at 30°C and 35°C. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 6054–6059, 2006     

我国金属阳极隔膜法烧碱发展现状与对策

详细介绍了我国氯碱工业采用金属阳极隔膜法制烧碱的现状及与世界先进水平的差距。提出了包括大力进行以节能为重点的技术改造；调整烧碱产品规格；彻底淘汰和转换石墨阳极隔膜法；推广先进的扩张金属阳极隔膜电解技术以及结合我国国情有计划地发展离子膜法制烧碱技术等改造措施及预期效果。     

铝箔纸胶粘剂的制备

由醋酸乙烯和丙烯酸酯所制得的共聚物，能够极大地提高乳液对铝箔和纸张之间的粘合力，通过调整保护胶体聚乙烯醇的用量和增塑剂邻苯二甲酸二丁酯在反应过程中的不同加入方式，可以控制和生产所需要的乳液粘度，流平剂的加入，则改良了乳液在铝箔上胶时的流平性。     

Reserve estimation of an open pit mine under price uncertainty by real option approach

Reserve estimation is a key to find the correct NPV in a mining project. The most important factor in reserve estimation is the metal price. Metal price fluctuations in recent years were exaggerated, and imposed a high degree of uncertainty to the re-serve estimation, and in consequence to the whole mine planning procedure. Real option approach is an efficient method of deci-sion making in the uncertain conditions. This approach has been used for evaluation of defined natural resources projects until now. This study considering the metal price uncertainty used real option approach to prepare a methodology for reserve estimation in open pit mines. This study was done on a copper cylindrical deposit, but the achieved methodology can be adjusted for all kinds of deposits. This methodology was comprehensively described through the examples in such a manner that can be used by the mine planners.     

钯－银合金膜分离氢气的研究

采用厚为５０μｍ的Ｐｄ／Ａｇ（２３）合金膜进行了氢气渗透系数的测定和Ｈ＿２／Ｎ＿２混和气分离的研究，得出温度、压力、膜厚、进料气流量、膜的预处理和再活化及膜表面中毒等因素对氢气渗透的影响。分离Ｈ＿２／Ｎ＿２混和气可获得高纯氢气。     

Interfacial Microstructure and Mechanical Properties of Al/Mg Butt Joints Made by MIG Welding Process with Zn-Cd Alloy as Interlayer

Butt joints between Mg alloy AZ31 B and pure Al 1 060 sheets were produced via metal inert gas welding process with Zn-Cd alloy foil. Crack-free Al/Mg butt joints between AZ31 B Mg alloy and pure Al 1060 sheets were obtained. Intermetallic compound layer 1 and layer 2 had formed in fusion zone/Mg alloy and the average thickness of the layer 1 was about 50 μm. The intermetallic compound layer 1 consisted of Al12Mg17 and Mg2Si phases while layer 2 consisted of Al12Mg17, Mg2Si and Mg Zn2 phases. The crack started from the IMC layer at the bottom of the joint and propagated along the brittle IMC layer, then expanded into weld metal during the SEM in situ tensile test. The highest tensile strength of the dissimilar metal butt joints could reach 46.8 MPa and the effect ofinterfacial IMC layer on mechanical property of the joint was discussed in detail in the present study.     

Large magnetic-field-induced strains in rare earth polycrystalline Ni-Mn-Ga

The magnetic-field-induced strains (MFIS) of polycrystalline Ni50Mn29Ga21 alloys containing Tb were studied. A large MFIS of-1.10% was obtained under compressive prestress conditions. The addition of Tb can fine the crystal grains, enhance the bending strength obviously, and make MFIS increase further, indicating that a moderate amount of Tb does not hinder twin boundary motion and it conversely makes the material more practical.