容器设计中搅拌装置的轴向力分析

搅拌装置在化工厂中应用很广，在磷肥、钛白粉装置中（15kt/a)使用较多，仅钛白粉装置中就大约有40－50台，如增稠结晶器，中和槽等，搅拌操作所涉及的因素极为复杂，浆叶形式的选择，从力学的观点来说，迄今研究不够，本文就搅拌装置产生的轴向力问题进行了初步研究。     

用于测定钢液低氧含量的双层固体电解质研究

采用“毛坯浆料法”在ＺｒＯ２（９％摩尔含量ＭｇＯ）管状固体电解质基体表面制备了厚度为１－４μｍ的ＺｒＯ２（１０％摩尔含量Ｙ２Ｏ３）固体电解质涂层，并分别对此在本实验室和美国ＬｅｅｄｓａｎｄＮｏｒｔｈｒｕｐ公司进行了钢液低氧含量测试，结果表明：涂层没有破坏基体的抗热震性：氧浓差电池电动势的重现性偏差由原来的±２ｍＶ；电动势的绝对值提高１０ｍＶ左右；而比日本Ｔｏｒａｙ公司的同类产品提高３５ｍＶ，这说明     

宽厚板厚度控制模型的优化

宽厚板厚度控制的目的是轧制出板形良好、板凸度小、同板差和异板差尽可能小的产品.莱钢宽厚板生产线自投人生产以来,在板凸度、厚度的均匀性、同板差和异板差等宽厚板厚度控制的瓶颈问题上都难以达到要求.为了实现对轧制厚度的要求,我们在现有的厚度控制模型的基础上,深入理解其控制功能、补偿功能的作用,找到引起厚度难以控制的主要因素,采取轧辊刚度补偿、轧辊偏心补偿、支撑辊油膜厚度补偿、工作辊热膨胀补偿及冲击力补偿等措施来优化厚度控制模型.自优化相应厚度参数和增加相关补偿控制功能以来,宽厚板厚度控制的精度得到很大的提高,具有很高的推广价值.     

Direct analysis of annealing of nodular crystals in isotactic polypropylene by atomic force microscopy, and its correlation with calorimetric data

The process of isothermal annealing of nodular monoclinic crystals of isotactic polypropylene (iPP) was analyzed by atomic force microscopy (AFM) and temperature-modulated differential scanning calorimetry (TMDSC). Initially nodular and mesomorphic domains were obtained by controlled melt-crystallization at high cooling rate. Subsequent heating triggers transition from mesomorphic to monoclinic structure, and melting of unstable nodules. Annealing allows re-crystallization, which is recognized by enlargement of domains from initially about 20 nm to about 35 and 55 nm after annealing at 393 and 433 K, respectively. Furthermore, the re-crystallization process is connected with a slight change of the aspect ratio of crystals. The isothermal re-crystallization of the liquid is superimposed by aggregation of crystals, to yield blocky, and string-like objects. The direct analysis of structure on isothermal annealing by AFM is for the first time compared with the isothermal decrease of the apparent specific heat capacity, or change of enthalpy, monitored by TMDSC. The apparent specific heat capacity decreases during annealing with an identical non-linear time dependence as the directly observed growth of the crystal size. Analysis of the annealing processes at different temperatures yields proportionality between the increase of the crystal size and the reduction of the apparent specific heat capacity.     

Initial Deposition of Colloidal Particles on a Rough Nanofiltration Membrane

The initial rate of colloid deposition onto semi‐permeable membranes is largely controlled by the coupled influence of permeation drag and particle‐membrane colloidal interactions. Recent studies show that the particle‐membrane interactions are subject to immense local variations due to the inherent morphological heterogeneity (roughness) of reverse osmosis (RO) and nanofiltration (NF) membranes. This experimental investigation reports the effect of membrane roughness on the initial deposition of polystyrene latex particles on a rough NF membrane during cross flow membrane filtration under different operating pressures and solution chemistries. Atomic force microscopy was used to characterize the roughness of the membrane and observe the structure of particle deposits. At the initial stages of fouling, the AFM images show that more particles preferentially accumulate near the “peaks” than in the “valleys” of the rough NF membrane surface.     

Shear-rate dependence of first normal stress difference of poly(isoprene-b-styrene) in solution near the order-disorder transition temperature

Viscoelastic properties of poly(isoprene-b-styrene) in dioctylphthalate under steady shear flow were measured near the order—disorder transition temperature. In ordered states, first normal stress difference N₁ is proportional to shear rate at low region, but becomes proportional to at the high region, similar to the N₁ behaviour of polymer blends undergoing shear-induced homogenization. Because the existence of microdomains was confirmed at the high region by the flow birefringence method, it is concluded that the above N₁ behaviour is not caused by shear-induced homogenization, but is probably caused by the shear-induced alignment of the microdomain structure.     

Films formed from polystyrene latex/clay composites: A fluorescence study

This study reports a steady-state fluorescence (SSF) technique for studying film formation from surfactant-free polystyrene (PS) latex and Na-montmorillonite (SNaM) composites. The composite films were prepared from pyrene (P)-labeled PS particles and SNaM clay at room temperature and annealed at elevated temperatures in 10-min intervals above glass transition temperature (t₃) of polystyrene. During the annealing processes, the transparency of the film improved considerably. Scattered light (I_s) and fluorescence intensity (I_p) from P were measured after each annealing step to monitor the stages of film formation. Evolution of transparency of composite films was monitored by using photon transmission intensity, I_tr. Scanning electron microscopy (SEM) was used to detect the variation in physical structure of annealed composite films. Minimum film formation temperature, T_q, and healing temperatures, T_h, were determined. Void closure and interdiffusion stages were modeled and related activation energies were determined. It was observed that both activation energies increased as the percent of SNaM was increased in composite films.     

The voidage function and effective drag force for fluidized beds

Here, an experimental investigation on the effective drag force in a conventional fluidized bed is presented. Two beds of different particle size distribution belonging to group B and group B/D powders were fluidized in air in a diameter column. The drag force on a particle has been calculated based on the measurement of particle velocity and concentration during pulse gas tests, using twin-plane electrical capacitance tomography. The validity of the voidage function “correction function”, (1−ε_s)ⁿ, for the reliable estimation of the effective drag force has been investigated. The parameter n shows substantial dependence on the relative particle Reynolds number , and the spatial variation of the effective static and hydrodynamic forces. It is also illustrated that, a simple correlation for the effective drag coefficient as function of the particle Reynolds number (Re_p), expressed implicitly in terms of the interstitial gas velocity, can serve in estimating the effective drag force in a real fluidization process. Analysis shows that, the calculated drag force is comparable to the particle weight, which enables a better understanding of the particle dynamics, and the degree of spatial segregation in a multi-sized particle bed mixture. The analogy presented in this paper could be extended to obtain a generalized correlation for the effective drag coefficient in a fluidized bed in terms of Re_p and the particle physical properties.     

Electrodeposition of copper on Ru(0 0 0 1) in sulfuric acid solution: Growth kinetics and nucleation behavior

The electrodeposition of Cu on Ru(0 0 0 1) from 0.1 M CuSO₄/0.5 M H₂SO₄ solution has been studied by cyclic voltammetry, current-time transient measurements, and by in situ electrochemical atomic force microscopy (EC-AFM). Cyclic voltammetry measurements show that the as-prepared Ru(0 0 0 1) electrode exhibits a UPD peak, while EC-AFM data indicate a broadly terraced surface with step heights of atomic dimensions. Kinetic data show that the electrodeposition/nucleation process is not well described by 3D or 2D nucleation models. The EC-AFM data show that at potentials near the OPD/UPD threshold, Cu crystallites exhibit pronounced growth anisotropy, with lateral dimensions greatly exceeding vertical dimensions. AFM data also show that deposition at more cathodic potentials result in smaller crystallites.     

ANSYS在整体式排水圆管分析中的应用

基于ANSYS APDL参数化设计语言编写程序,利用程序对整体式排水圆管进行数值计算.模型中考虑了不同荷载的施工方法,并利用路径映射技术实现了各截面的内力输出,从而合理地揭示了在土压力、外水压力和自重的共同作用下整体式排水圆管的位移、应力和内力分布规律.最后通过工程实例,验证了程序的可靠性.