Estimation of heat of combustion of triglycerides and fatty acid methyl esters

Equations were developed for the estimation of gross heat of combustion (HG) of triglycerides (TGs) and fatty acid methyl esters (FAMEs) from their saponification number (SN) and iodine value (IV). HG of TG=1,896,000/SN − 0.6 IV — 1600 and HG of FAME=618,000/SN − 0.08 IV — 430. When these equations were tested on cottonseed oil, soybean oil, partially hydrogenated soybean oil, peanut oil, sunflower oil, sunflower oil methyl esters, soybean oil methyl esters and cottonseed oil methyl esters, predicted HG values agreed well with those reported in the literature.     

Oil monitoring methods based on information theory

To evaluate the wear condition of machines accurately,oil spectrographic entropy,mutual information and ICA analysis methods based on information theory are presented. A full-scale diagnosis utilizing all channels of spectrographic analysis can be obtained. By measuring the complexity and correlativity,the characteristics of wear condition of machines can be shown clearly. The diagnostic quality is improved. The analysis processes of these monitoring methods are given through the explanation of examples. The availability of these methods is validated and further research fields are demonstrated.     

加氢降凝组合工艺技术

抚顺石油化工研究院开发的生产低凝清洁柴油加氢降凝组合工艺,集加氢精制与临氢降凝工艺技术优点于一体,具有工艺流程简单、精制及降凝效果好、柴油收率高、原料适应能力强、产品方案灵活等特点,已在哈尔滨等炼油厂得到工业应用.     

In situ esterification of rice bran oil with methanol and ethanol

In situ esterifications of high-acidity rice bran oil with methanol and ethanol and with sulfuric acid as catalyst were investigated. In the esterification with methanol, all free fatty acids (FFA) dissolved in methanol were interesterified within 15 min, and it was possible to obtain nearly pure methyl esters. The amount of methyl esters obtained from a given rice bran was dependent on the FFA content of the rice bran oil. In the esterification with ethanol, it was not possible to obtain pure esters as in methanol esterification, because the solubilities of oil components in ethanol were much higher than those in methanol.     

Effects of silicone oil and polymeric modifiers on the mechanical properties of highly filled LLDPE

The effects of coupling agents, silicone oil, and three types of polymeric modifiers on the mechanical properties of linear low density polyethylene (LLDPE) composites highly filled with aluminium hydroxide [Al(OH)₃] were studied. Polymeric modifiers that contain polar groups, such as silane‐grafted polyethylene (Si‐g‐PE) and acrylic‐acid‐grafted ethylene‐vinyl acetate copolymer (AA‐g‐EVA), improve the mechanical properties dramatically, while nonpolar modifiers improve them to some extent. When Al(OH)₃ was treated using a titanate coupling agent, the silicone oil increased the impact strength and elongation at break of the LLDPE/Al(OH)₃ composites. Introduction of a polymeric modifier containing polar groups destroys the beneficial effects of silicone oil on film mechanical properties, while the introduction of a nonpolar elastomeric polymeric modifier retains the high impact strength and elongation at break. SEM analyses provide the indirect evidence of the encapsulation of silicone oil around the filler. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 121–128, 2002     

液压系统进、旁油路联合调速回路分析

在定量液压泵供油的系统中给出进、旁油路联合调速的回路,通过对2种进、旁油路联合调速的定量分析,推导出理论计算依据,得出这2种进、旁油路联合调速的调速特点。     

高线精轧机平衡缸漏油分析及改进

分析了广州钢铁企业集团公司高线厂精轧机平衡油缸漏油的危害和原因，指出了这种油缸在设计上存在的缺陷，并提出了改进措施，改进后漏油问题得到了解决。     

纳米Fe_2O_3作为润滑油添加剂的摩擦磨损性能

采用烧结方法制备得到纳米α-Fe_2O_3,利用X射线衍射仪(XRD)和透射电镜(TEM)对样品进行了表征,研究了纳米α-Fe_2O_3作为液体石蜡添加剂的摩擦磨损性能。结果表明,添加纳米添加剂后,润滑油摩擦系数改变不明显,但磨损率显著降低。磨损率与纳米α-Fe_2O_3添加剂的表面积和添加量密切相关,当纳米材料的表面积为47m~2/g时磨损率最低,磨损率值降低为3.78×10~(-15) m~2/g;添加量为1.0wt%,润滑油磨损率最低。     

5种药用植物挥发油对仓库害虫生物活性的研究

研究了香薷、鹤虱等５种药用植物挥发油对仓虫的生物活性作用。结果表明,香薷挥发油的作用最为明显,它（剂量０２μＬ／ｇ）及其粗分离１＃～５＃样品（剂量００５μＬ／ｇ）均有效地抑制了试虫卵、幼虫及成虫的生长发育,从而减少了试虫Ｆ１代种群的发生,其中粗分离１＃样品作用尤为突出。香薷挥发油１＃～５＃样品的主要化学成分为４,５,６,７,８,８ａ－六氢－８ａ－甲基－２［１Ｈ］－奥酮（５２６４％）、百里香酚（３０５％）和一未定成分（２１９２％）。     

浅析40T支架搬运车液压系统油温变化对其效率的影响

介绍了油温变化对40T支架搬运车液压系统油液黏度、液压介质和橡胶类密封件的影响,分析了液压系统的总发热功率、总散热功率,结合动态热平衡的计算,找出了液压系统总效率与油温变化之间的关系,并给出其函数关系式。根据这种关系,通过一种工况的油温实测数据取样,计算出相应的效率值,定量地验证了液压系统油温变化引起效率变化的关系,得出了总效率随着温度变化而变化的结论,即温差增大时,总效率降低;温差减小时,总效率增大。通过该结论可以全面掌握系统的工作状态,通过降低油温有效提高效率。