NH—1干粉瓦楞纸板粘合剂的研制

采用复合改性剂生产改性淀粉,制得干粉状NH—1粘合剂,并进行了工业化生产,取得了满意的结果。     

Vertical bridgman techniques to homogenize zinc composition of CdZnTe substrates

In order to improve the Zn homogeneity along the axial direction of CdZnTe boule, we have employed a modified Bridgman technique using a (Cd, Zn) alloy source in communication with the melt, whose temperature has been gradually changed from 800 to 840°C during growth. Electron probe microanalysis (EPMA) measurements of Zn composition in the boule shows an excellent homogeneity of Zn along the axis of the CdZnTe boule compared with results in a boule grown by using a fixed source temperature. We have performed a numerical simulation to obtain the approximate temperatures of additional heating and cooling needed to improve the radial Zn homogeneity. CdZnTe boule has been grown by seeded vertical Bridgman furnace with two zones of heater and cooler. Ultraviolet/visible spectroscopic measurements of Zn composition over the length of the boule indicate that the radial distribution of Zn composition is very homogeneous in the body region of the boule, where the radial variation of Zn composition is ±0.0005.     

Modified Atmosphere Packaging Affects Ascorbic Acid, Enzyme Activity and Market Quality of Broccoli

Reduced ascorbic acid (RAA) content, total chlorophyll and green color retention, enzyme activities and texture changes were followed in broccoli spears packaged in polymeric film and nonpackaged during 96 hr storage (10°C). Concentrations within packages monitored by gas chromatography were (CO₂,) 8% and (0²) 10%. RAA retention, moisture content, total chlorophyll and color retention were greater in packaged broccoli. No differences were found between packaged and nonpackaged broccoli for ascorbate oxidase and peroxidase activities, or texture.     

改性己二胺制备TG301环氧树脂室温固化剂

已二胺经与环氧树脂进行羟烷基化及与丙烯腈进行氰乙基化反应达到改善低熔点低毒性．低脆性的综合效果．文中介绍了改性乙二胶固化剂的制备方法，质量指标和有关固化特性等．     

修正型罗德里格斯参数在旋转弹上的应用

光纤陀螺可应用于旋转弹导航上,以提高其精确打击能力。基于光纤陀螺的捷联惯性导航系统是实现这一目的的重要手段之一。其中,姿态更新算法是捷联惯性导航系统的核心。针对旋转弹短时、近程的特点,提出一种基于修正型罗德里格斯参数的全姿态更新算法,并给出适合旋转弹姿态确定的数学模型。仿真结果表明与传统姿态更新算法相比较,新算法可以更有效的抑制不可交换误差,降低跟随时间的累积误差,减少高动态环境下的计算量,提高算法结算的速度和精度。     

一种新的修正恒模算法

阐述了恒模算法(CMA)、修正恒模算法(MCMA)和判决引导(DD)算法的基本原理。针对CMA和MCMA收敛速度慢,固定步长条件下收敛速度和剩余误差之间存在矛盾的缺陷,在分析CMA误差特性的基础上,利用DD算法误差函数的模值和判决器输出构造新的误差函数,提出了一种新的变步长MCMA。新算法在加快收敛速度的同时保持小的剩余误差。仿真结果表明,新算法比CMA和MCMA收敛速度快,均衡输出剩余码间干扰(ISI)小而且能克服相位偏移,具有很好的实用性。     

Preparation of β-cyclodextrin/SBS modified asphalts for the improvement of anti-aging,rheological property,and storage stability

Styrene-butadiene-styrene (SBS) modified asphalt (SMA) has been widely used in road engineering for decade. However, the phase separation of SMA was obvious during the transport and SBS degraded after aging. To resolve these problems, β-cyclodextrin (β-CD) was used to modify SMA in this work. Conventional properties, storage stability, the effect of short-term aging on the morphology, and rheological property for SMA and β-CD/SMA were investigated. The softening point of modified asphalt reached to the maximum of 66.7°C when 1 wt% β-CD was added to SMA, where the penetration had shown the minimum of 80.8 dmm. In addition, the ductility of β-CD/SMA increased to the maximum of 797 mm when the content of β-CD was increased to 5 wt%. Furthermore, incorporation of β-CD improved the storage stability of SMA. Importantly, the aggregation of SBS was observed in β-CD/SMA, but modifiers distributed uniformly after a short-term aging. The rutting resistance and antiaging performances of SMA were also improved by the addition of β-CD. Considering the comprehensive properties of modified asphalt, the optimum content of β-CD was found to be 2 wt%.     

高温高湿盐环境下SBS改性沥青胶浆的高温性能

基于自行设计的室内盐蚀干湿循环试验,采用动态剪切流变仪,对SBS改性沥青胶浆进行温度扫描试验和多重应力重复蠕变恢复(MSCR)试验. 以3.2 kPa应力下的不可恢复蠕变柔量J_nr,3.2为胶浆高温流变性能评价指标,分析试验环境和干湿循环耦合作用对胶浆流变性能的影响. 采用灰色关联理论,探究J_nr,3.2与常规流变参数、干湿循环次数及试验环境之间的关联性. 结果表明,随着盐蚀干湿循环次数的增加,胶浆的复数切变模量、车辙因子及J_nr,3.2均呈增大趋势,相位角和蠕变恢复率呈减小趋势. 在同种试验条件下,硫酸盐环境对胶浆高温性能的影响最大. J_nr,3.2与改进型车辙因子、试验环境的灰色关联度最大,关联度系数均大于0.93. 建议采用日常清扫、定期洒水冲洗的方式来减小路面盐分的积累,提高高温高湿环境中沥青路面的抵抗变形的能力.     

基于人工智能的钛合金热变形工艺参数优化

在深入分析热变形工艺参数对Ti-15-3合金显微组织及成形载荷的影响的基础上,以变形温度、变形程度和变形速率等热变形工艺参数作为设计变量,以显微组织和成形力的最佳综合为目标,建立了该合金热塑性成形工艺参数的多目标优化数学模型。以显微组织参数和成形力的人工神经网络预测模型作为优化算法的知识源,将人工神经网络与修正的遗传算法相结合,对Ti-15-3合金的热塑性成形工艺参数进行优化。结果表明,提出的修正的遗传算法是有效的,采用将其与人工神经网络相结合的方法对钛合金的热塑性成形工艺参数进行优化是可行的。     

改性BMI微孔轴承保持器材料研究

采用改性双马来酰亚胺树脂制备微孔轴承保持器材料，探讨了制备工艺和最佳工艺参数，得到性能优良的改性双马来酰亚胺微孔轴在保持器材料。