光漂白法制备有机聚合物非线性定向耦合器

研究了用光漂白的方法制备PMMA/DR1聚合物非线性定向耦合器,提出了一种容易的制备方法来得到要求的耦合长度.测量了材料的光学非线性对定向耦合器两臂透过率的影响.实验结果表明由于光学非线性,耦合器的耦合长度随着入射光强度的改变而发生变化.     

MEMS光开关及其与光纤组装方式的研究

光开关是一种在光路中应用极其广泛的光无源器件,可用于扫描、投影、通讯等多种不同的领域,其中用于全光通讯中连接光纤之间的光开关日渐成为人们关注的焦点.高性能、低成本、又能大量生产的MEMS光开关很好地满足了全光网络对器件的要求.本文对这种MEMS光纤光开关的类型、特点以及研究现状进行了介绍,并给出了MEMS光开关与输入输出光纤的组装与自组装以及主要方式.     

Effects of compressive and tensile stress on the growth mode of epitaxial oxide films

Oxide films were deposited on different substrates by laser molecular beam epitaxy. Reflection high-energy electron diffraction was performed to in situ investigate the change of growth mode and the lattice relaxation during the growth. An asymmetrical phenomenon was found in the two kinds of strain states, compressive stress and tensile stress of heterostructures with different lattice mismatch. In the case of BaTiO₃/SrTiO₃ (2.2%), 2D layer-by-layer growth mode without lattice relaxation can be maintained for a longer period for BTO films on STO with compressive stress, comparing to STO films on BTO with tensile stress. When MgO films were deposited on SrTiO₃ with a large mismatch of 7.8%, compressive stress leads to rapid lattice relaxation with a very thin wet layer, and 3D strained island were observed. As a comparison, SrTiO₃ films on MgO with tensile stress were configured. No RHEED patterns can be observed duo to a large tensile stress.     

基体温度对磁控溅射沉积ZAO薄膜性能的影响

利用中频交流磁控溅射方法 ,采用氧化锌铝陶瓷靶材 [w(ZnO) =98%、w(Al2 O3 ) =2 % ]制备了ZAO(ZnO∶Al)薄膜 ,观察了基体温度对ZAO薄膜的晶体结构、电学和光学性能的影响 ,采用X射线衍射仪对薄膜的结构进行了分析 ,采用光学分度计和电阻测试仪测量了薄膜的光学、电学特性 ,采用霍尔测试仪测量了薄膜的载流子浓度和霍尔迁移率。结果表明 :沉积薄膜时的基体温度对薄膜的结构、结晶状况、可见光透射率以及导电性有较大的影响。当基体温度为 2 5 0℃ ,Ar分压为 0 8Pa时 ,薄膜的最低电阻率为 4 6× 10 -4Ω·cm ,方块电阻为 35Ω时 ,可见光 (λ =5 5 0nm)透射率高达 92 0 %。     

3D velocity from 3D Doppler radial velocity

We present local least squares and regularization frameworks for computing 3D velocity (3D optical flow) from 3D radial velocity measured by a Doppler radar. We demonstrate the performance of our algorithms quantitatively on synthetic radial velocity data and qualitatively on real radial velocity data, obtained from the Doppler radar at Kurnell Radar station, Botany Bay, New South Wales, Australia. Radial velocity can be used to predict the future positions of storms in sequences of Doppler radar datasets.© 2005 Wiley Periodicals, Inc. Int J Imaging Syst Technol, 15, 189–198, 2005     

Dynamic Multicast Session Provisioning in WDM Optical Networks with Sparse Splitting Capability

In this work, we study dynamic provisioning of multicast sessions in a wavelength-routed sparse splitting capable WDM network with an arbitrary mesh topology where the network consists of nodes with full, partial, or no wavelength conversion capabilities and a node can be a tap-and-continue (TaC) node or a splitting and delivery (SaD) node. The objectives are to minimize the network resources in terms of wavelength-links used by each session and to reduce the multicast session blocking probability. The problem is to route the multicast session from each source to the members of every multicast session, and to assign an appropriate wavelength to each link used by the session. We propose an efficient online algorithm for dynamic multicast session provisioning. To evaluate the proposed algorithm, we apply the integer linear programming (ILP) optimization tool on a per multicast session basis to solve off-line the optimal routing and wavelength assignment given a multicast session and the current network topology as well as its residual network resource information. We formulate the per session multicast routing and wavelength assignment problem as an ILP. With this ILP formulation, the multicast session blocking probability or success probability can then be estimated based on solving a series of ILPs off-line. We have evaluated the effectiveness of the proposed online algorithm via simulation in terms of session blocking probability and network resources used by a session. Simulation results indicate that our proposed computationally efficient online algorithm performs well even when a fraction of the nodes are SaD nodes.     

Analysis of S-SEED''s characteristics in optical switch

This article introduces the basic structure of a symmetric self-electrooptic effect device （S-SEED）, and applies the Kirchoff＇ s current law and a purely equivalent capacitive model, to analyze S-SEED＇s switch characteristics. Linear approximation and N-segment approximation are utilized to obtain S-SEED＇s voltage-time （V-T） and characteristics. Theoretical analysis is verified by simulations, and the results demonstrate that the precision of S-SEED＇s switch time can satisfy the requirement in applications with linear approximation. Moreover, the simulations compare S-SEED＇s switch characteristics with different input powers and input contrast ratios, which reveal that increasing input contrast ratio is an effective way to improve S-SEED＇s switch characteristics.     

现代电子产品焊接质量的检测技术

介绍了现代电子产品焊接质量的检测技术,以及用于检查焊点质量和组装板(SMA)功能的测试仪器的工作原理及测试能力.目前常见和广泛使用的焊接质量检测方法是人工目测检查,其主要问题是其主观性,只能用来检测电子元件的形状、尺寸、颜色、表面特征及焊点的外观质量;自动光学检测(AOI)可以在整个过程中发现和纠正缺陷,但只是外在的焊点缺陷;激光/红外线组合式检测系统、X射线检测系统可以分析焊点微米级水平的缺陷,能找出其他检测所不能可靠地发现的缺陷,包括空洞、焊点形状差和冷焊锡点等;另外,X射线检测系统能一次测试单面或双面电路,准确地定位缺陷,获取工艺参数,例如锡膏厚度等.     

光纤荧光传感器衰减寿命的加权对数拟合法

荧光寿命的检测是荧光光学传感器的核心内容，国际上尝试了多种方法来拟合这种理论上为单指数衰减信号的荧光衰减曲线。这些方法包括非线性函数标准拟合方法。即Levenburg-Marquardt方法，以及Prony方法、FFT方法，对数拟合法等等。为了克服在实际应用中发生的信号退化，需要在测量信号衰减寿命的同时测量信号的初始强度。文章介绍了一种加权的对数拟合法，经计算机仿真及实际数据测试均可以得到和Levenburg-Marquardt方法非常接近的结果，且拟合时间大大缩短，测量稳定性大大提高。仿真测试及具体实验测试结果显示了这种方法的有效性。该方法不仅与Levenburg-Marquardt方法的偏差曲线非常相似，而且实验测得的荧光寿命与Levenburg-Marquardt方法偏差在0．2％以内。