浅析2020年前美军事战略重点的转变--从装备发展看美国军事战略重点可能的变化

美国21世纪前期的军事战略重点将是争夺外空优势，夺取制天权和制信息权。分析了美国夺取外空优势的原因，及其为夺取外空优势在国家政策、航天发展和技术准备等方面采取的措施。     

大庆油田套损井打通道加固技术

介绍了大庆油田近几年在套损井打通道加固技术方面取得的技术进步，在磨铣打通道技术上主要对钻铣工具的结构进行了优化设计及合理及合金刀块的优选组合，提高了磨铣效率，缩短了施工周期；在爆炸打通道技术中设计了安全隔爆装置，提高了施工的安全性，使爆炸扩径技术得到完善；Φ106mm密封加固技术的研制成功，取代了Φ100mm密封加固技术，为套损井修复后的完井工艺提供有效的技术支持，提出了大庆油田目前在套损井打通道加固方面存在的难题，结合国外在套损井打通道加固方面技术的新发展，对现有技术的局限性进行了分析，提出了今后技术攻关的方向。     

Effect of refraction on optical microscopic measurement of internal blood-vessel diameter and its correction

In optical microscopic measurement of internal blood-vessel diameters, the effect of refraction must be taken into account to ensure accuracy of the result. This effect is discussed and an analytical correction formula derived. Phantom blood vessels with known internal and external diameters were used to test the validity of the correction formula. The errors obtained prior to correction were reduced significantly after correction.     

18臂机械井径与磁法井径组合测井仪原理及应用

文章主要介绍了18臂机械井径与磁法井径组合测井仪的仪器结构、主要技术特性、测量原理及测井资料在油田中的应用。通过对测井资料的分析，阐述了该仪器在套损检测、补贴效果检查、射孔工程作业效果评价等方面的应用，为油田套管分析提供了可靠的保证。     

单层开采的圆形定压边界两层油藏压力动态分析

为更好地分析具有越流的多层油藏的压力动态，采用有效井径的概念，在半透壁模型的基础上建立了圆形定压边界、两层越流油藏单层开采时的渗流数学模型。通过拉氏变换得到了拉氏空间中以Bessel函数表示的精确解。数值反演计算结果表明，单层开采的两层油藏与全部打开的两层油藏的压力动态基本相同，都表现为3个阶段：早期是介于两个渗透层之间的均质流动；中间为过渡段，导数曲线出现下凹特征；晚期表现为整个油藏的均质特征。随着边界距离的增加，压力导数值趋近于0．5。半透率越大过渡段出现得越早。导数曲线下凹程度越小；储容比越大导数曲线峰值越小，导数曲线下凹程度越小；随着两层渗透率比值变小。过渡段变短，导数曲线下凹程度变小。图1参9     

万家寨大坝外部变形控制网综述

结合万家寨水利枢纽大坝外部变形控制网测量项目 ,从控制网的布设、标点建造、观测、数据处理及成果分析等方面进行了介绍。实际观测结果说明 ,该控制网能够准确反映大坝运行状态 ,满足工程安全运行需要     

AHMED experiments on hygroscopic and inert aerosol behaviour in LWR containment conditions: experimental results

Hygroscopic NaOH, CsI, CsOH and inert Ag aerosol behaviour at different temperatures and relative humidities (RH) has been studied in a well instrumented and controlled vessel of 1.81 m³ total free volume. Homogeneous thermal-hydraulic conditions for aerosol measurement in the vessel were achieved. The aerosol number and mass concentration were measured continuously during the experiments using a Condensation Nucleus Counter and a Tapered Element Oscillating Microbalance. The particle size distribution and chemical composition in the test conditions were measured by Berner low pressure impactors. In the case of NaOH the half life of the aerosol mass concentration was more than four times longer at low RH (22%) as compared to high RH (96%). The half lives of the CsOH and CsI aerosols were only twice as long at low RH as compared to high RH. Thus at high RH (96–97%) the half lives of CsOH and CsI were twice as long as the half life for the NaOH aerosol. The faster decay of the NaOH aerosol is due to the smaller density decrease of NaOH during water condensation. CsOH particles grew rapidly to their equilibrium size at all humidities. The measured equilibrium size for CsOH aerosol agree well with the calculated particle size at different RHs. Experimental results were also compared with calculations obtained by severe accident computer codes. These calculated results will be presented in a later paper.     

悬沙中D〉0．06mm粗粒的粒析级配组成及其改正方法

本文首先简述Ｄ＞０．０６ｍｍ泥沙的粒析沉降特性及其粒径偏粗的原因。继之对悬沙中粒径大于０．０６ｍｍ的粒析级配组成机理，及级配组成不同对标准粒径Ｄｂ与粒析粒径ＤＬ关系的影响进行了详细研究。在以上研究工作的基础上，开展了Ｄｂ与ＤＬ的比较试验，得出了粗、中、细型悬沙的Ｄｂ～ＤＬ关系和对ＤＬ的改正方法。     

发动机扭矩与转速关系经验公式试验研究

在对发动机外特性曲线扭矩与转速实验数据分析的基础上，对原有的经验公式进行了分析、改进，提出了新的经验公式．由这一经验公式所计算的数值，在最大扭矩与最大功率点之间，可与实验数据拟合得很好．与原经验曲线相比，新经验曲线与实验曲线的离差可下降50％以上．     

Prediction of Final Product Properties After Cocurrent Spray Drying

The effect of drying and atomization conditions on the physical properties of powders for agglomerate-like materials and skin-forming material are studied in this article. A neural model is used for powder bulk and tapped density predictions.