ZYBG型矿用瓦斯输送管道自动抑爆装置研制

为了保障瓦斯输送管道的安全性,采用主动抑爆技术研制了ZYBG型矿用瓦斯输送管道自动抑爆装置。该装置利用火焰探测器探测瓦斯爆炸信号,并将信号通过光电转换传输给控制器,控制器对信号进行判定和分析,在爆炸接近防护区间的瞬间快速打开高压抑爆器,释放抑爆介质,熄灭火焰,阻断爆炸的进一步传播。抑爆性能试验结果表明,该抑爆装置能够在5ms内快速捕捉火焰信息,并在35ms内迅速喷洒抑爆介质。     

阻燃性有机硅高分子材料的研究进展

综述了国内外在阻燃性有机硅高分子材料的制备、性能及应用等方面的研究进展，介绍了有机硅高分子材料的燃烧历程、常用阻燃剂及其阻燃机理，并对阻燃性有机硅高分子材料的研究发展前景进行了展望。     

聚氨酯塑胶地板的阻燃研究

采用三氧化二锑(Sb_2O_3)、磷酸三(2,3-二氯丙基)酯(TDCPP)、水合氧化铝(A1_2O_3·3H_2O)和溴-氧烷基磷酸双酯(PUR-101)等阻燃剂对聚氨酯塑胶地板进行了阻燃改性研究。结果表明,单独使用Sb_2O_3阻燃剂对聚氨酯塑胶地板没有阻燃效果;TDCPP、Al_2O_3·3H_2O、PUR-101及其复合阻燃剂对聚氨酯塑胶地板都有较好的阻燃效果。     

膨胀石墨在聚乙烯中阻燃协效作用的研究

以膨胀石墨(EG)与聚磷酸铵(APP)复配组成膨胀型阻燃剂，应用于高密度聚乙烯(PE-HD)中。热分析表明APP／FG的添加使得PE-HD材料的热稳定性增强，降解过程变缓，剩炭率增加。氧指数(LOI)结果表明APP／EG具有良好的阻燃协同作用。扫描电镜(SEM)显示APP／EG的加入可使得PE-HD样品生成连续致密的炭层。同时力学性能研究表明APP／EG对材料的力学性能的影响比其它膨胀型阻燃剂要小。     

阻燃纺织品加工方法及发展趋势

综述了阻燃纺织品的阻燃机理、加工方法和发展趋势等,并提出了我国阻燃纺织品应向着功能复合化、绿色环保化和高技术化的方向发展,希望能够对阻燃纺织材料的发展起到一定的借鉴意义。     

尿液喷浆造粒--生产复合肥的一种新工艺

简述了在团粒法工艺的基础上，用尿素熔融尿液或尿素车间二段蒸发器的尿液进行喷浆造粒生产复合肥的改造方案、改造内容、改造效果和投资情况。     

低烟阻燃高抗冲聚苯乙烯的研究

用氢氧化镁（MH）和硼酸锌（ZB）与十溴二苯醚（DBDPO）－氧化锑或包覆红磷共同使用以阻燃高抗冲聚苯乙烯（HIPS）可使燃烧过程中的发烟量降低40％左右。与十溴二苯醚－氧化锑和包覆红磷体系相比，聚苯醚（PPO）和一种磷酸酯阻燃剂配合作用时HIPS的阻燃、抑烟作用以及对力学性能有较大改善作用。     

桥面铺面防水粘结层胶结材料洒布量的确定方法

为确定桥面铺面防水粘结层胶结材料洒布量,采用橡胶沥青和两种典型的沥青混合料,通过设计直向剪切试验和斜向剪切试验研究桥面防水粘结层的力学性能,分析不同因素对于防水粘结层剪切性能的影响．试验结果表明,加载速率的提高,粘结层最大剪切应力有呈线性增大的趋势;采用不同温度的对比试验,同样发现随温度的升高,其抗剪切能力显著衰减．可以通过剪切试验的剪应力和变形能两个指标评价其剪切性能．     

Enhancing flame retardant and antistatic properties of polyamide 6 by a grafted multiwall carbon nanotubes

In order to improve the flame retardancy and antistatic properties of polyamide 6 (PA6) at as low amount of additives as possible, an integrated-functional additive was synthesized by 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) and multiwalled carbon nanotubes (MWCNTs). The results showed 2 wt% of DOPO-MWCNTs distributed in PA6 formed an electric network and decreased volume resistivity sharply to 3.1 × 10⁸ Ω cm. In other words, it helped PA6 to get to the percolation threshold of semiconductor. By using of 3 wt% DOPO-MWCNTs, the severe dripping in burning of PA6 was almost controlled. The possible reason was also ascribed to the network formed by evenly dispersed DOPO-MWCNTs, which strengthened the char structure and held severe dripping of PA6. As a result, the heat and smoke release were also suppressed obviously. The most important is that CO release was about half cut in CONE test.     

High-efficiency ammonium polyphosphate intumescent encapsulated polypropylene flame retardant

The flame retardant polypropylene containing the micro-envelope core-shell structure flame retardant, which encapsulated ammonium polyphosphate into melamine-formaldehyde resin and sodium silicate through in situ polymerization was prepared with polyamide 6, added as a carbon-forming agent. The composition of ammonium polyphosphate, encapsulated ammonium polyphosphate with melamine-formaldehyde resin and the micro-envelope core-shell structure flame retardant were characterized. The fire safety and thermal stability were investigated and showed an improvement including limiting oxygen index, thermogravimetric analysis, vertical burning tests, and microscale combustion calorimeter. The burned compounds were also studied to confirm the burning mechanism. The results showed the flame retardant performance had been greatly improved, while polyamide 6 had better char-forming effect. Besides, the water solubility of flame retardants and their influence on the mechanical properties of polypropylene were also investigated. The results on the effects of additives demonstrated a high efficiency flame retardant to polypropylene. A core-shell flame retardant that sodium silicate and melamine-formaldehyde resin-coated ammonium polyphosphate had been constructed. The effect of the built flame retardant system on the combustion performance of polypropylene was studied from the mechanism and performance. The LOI of the most flame retardant polypropylene reached 28.6%, and UL-94 reached the V-0 level.