尿素分解加热器清洗剂的研制和应用小结

针对一分加污垢的特点，通过实验，研制了以有机酸为主要成份的尿素分解加热器清洗剂及清洗工艺，并进行了４台次加热器的清洗，取得了较好的效果。此清洗方法具有工艺简单、安全、分析控制容易、费用低廉的特点。     

我国建筑涂料的技术水平及发展方向

介绍了我国建筑涂料的技术水平、发展方向及前景。     

一体化复合式膜生物反应器除磷研究

本文通过对比实验，研究了不同工艺组合条件下一体化复合式膜生物反应器（HCMBR）的除磷效果，研究表明，在无厌氧段的情况下，反应器内保持好氧状态的同时，填料内部存在厌氧环境，TP的去除率为22％，在有厌氧段（A／O）的情况下，TP的去除率可达70％，采用化学方法时，TP去除率可达82．1％，但过高的n(Al^3 )/n(TP)值将会影响污泥的活性，并且HCMBR对NH3－N，CODCr,TN等污染物有十分良好的去除效果。     

粗品四氢呋喃的除醇与抗氧化技术

介绍了粗品四氢呋喃的除醇技术，过氧化物的生成机理与抗氧化技术。     

化学强化生物除磷工艺及设计

本文介绍了一种新的化学强化生物除磷工艺及其设计实例，与Phostrip侧流除磷工艺相比，其工艺优势在于所有污泥均经释磷和厌氧选择处理，通过化学沉积释放的磷，从而消除了在污泥处置过程中产生的磷释放回到污水处理系统的问题；所有回流污泥经厌氧选择处理，含有较高浓度聚磷菌类微生物，从而具有较高的除磷效率。     

通过细乳液聚合方法制备自交联型有机硅乳液

苯乙烯与甲基丙烯酸-3-三甲氧基硅丙酯(M PS)经细乳液聚合,制得了稳定的自交联型的水分散涂料,用透射电子显微镜(TEM)、动态光散射仪(DLS)和红外光谱(IR)表征了乳胶粒的形态和结构。发现与传统乳液聚合相比,细乳液聚合法可显著提高乳液的稳定性,且M PS加入量的增加会导致乳液稳定性降低。     

金属离子掺杂二氧化钛及水体光催化脱氮研究

采用溶胶-凝胶法制备了掺杂Ce^3＋、La^3＋、Ag^＋、Fe^3＋的TiO2光催化剂，以考察其薄膜和粉体形式对水中无机氮的光催化去除效果和活性．用所制备的催化剂对含氨氮-亚硝酸氮的混合液进行了光催化脱氮研究．本文利用UV—Vis吸收光谱、XRD和TEM对催化剂进行了表征．同时，对影响TiO2光催化效率的因素：如掺杂金属离子的种类、浓度、涂膜层数、反应液中有无Fe^2＋、不锈钢和玻璃载体、反应器的构型等进行了探讨，并对今后的研究进行展望．经过2h紫外光照射反应，实验最佳脱氮效果：金属离子掺杂TiO2薄膜型催化剂总氮去除率在30％左右，金属离子掺杂粉末型催化剂光催化最高总氮去除率可达41．7％．     

采用有机盐─石膏脱硫剂的烟气脱硫新工艺

介绍一种利用有机羧酸盐作为吸收剂、以熟石灰作还原剂的烟气脱硫系统，在日本投入生产运行，其脱硫效率达９０％以上。     

镀锌层与氟碳漆涂层的相容性研究

在部分产品中,钢表面镀锌后表面再涂一层漆,其目的是为了增加耐腐蚀性能。但是锌可能会与漆层中的一些组份发生反应,降低漆膜性能。本文通过开展氟碳漆涂层和镀锌层湿热试验后性能测试研究,表明两者之间具有较好的相容性,可提高产品的防护性能。     

Liquid-Phase Transport During Removal of Organic Binders in Injection-Molded Ceramics

A method has been developed for calculating hydraulic pressures induced by thermal expansion of liquid binders early in the removal cycle, when evaporative losses are negligible and fully saturated conditions prevail. Specific results were obtained for flat compacts containing a common wax binder, mixed with varying amounts of low-density polyethylne. In general, these results show how the risk of hydraulic fracture increases with heating rate and compact thickness. Although pressures are minimal when the binder consists entirely of wax, the continual addition of polyethylene eventually gives rise to unacceptable risk levels, even for relatively thin compacts. Binder removal at elevated temperatures is considered subsequently. In this case, vapor pressures eventually approach a critical level, thereby allowing mass removal by evaporation to overcome the effect of thermal expansion in maintaining full saturation. With the onset of void formation, the developing capillary pressure supersedes hydraulic pressure as the driving force in liquid transport. Besides representing capillary flow, the present formulation also accounts for thermal degradation of the binder during removal. The resulting system of equations was solved numerically for a variety of representative debinding conditions. Predictions for flat compact containing a balanced wax/polyethylene binder indicate that thermal degradation of the polyethylene can give rise to a marked improvement in debinding rates. It turns out, however, that this enhancement is far more effective in thinner compacts.