交联剂对双组分水性氟涂料的影响

从反应速度、适用时间等方面研究了几种交联剂对水性双组分氟涂料漆膜性能的影响。     

Particle-Substrate Collisions, Particle Rebound and Removal

Recent progress in particle capture and rebound and its effect on the adhesion force is reviewed in this paper. Particles rebound when the incident velocity is greater than a characteristic critical velocity. Lower impaction velocity particles experience elastic and plastic deformation. Recent models for particle rebound and capture are discussed and evaluated in terms of their restrictive assumptions and results. Recent experimental data of particle rebound and capture is also discussed, as is the hydrodynamic removal of captured particles. The removal of particles occurs when the applied hydrodynamic removal force overcomes the adhesion force. The effect of adhesion-induced deformation on the removal of particles is introduced and discussed.     

电凝聚方法处理聚氯乙烯工业废水试验

对电凝聚方法处理聚氯乙烯工业废水的效果及影响因素进行了分析研究。现场运 行结果表明,该方法试验装置对聚氯乙烯废水的处理效果较好,出水水质达到综合排放 标准,对COD,BOD和TSS的去除率分别达到95％,91％和90％;对废水流量负荷的变化 具有较好的适应性,保证出水水质稳定;装置的运行成本经济实用。     

渗透汽化汽油脱硫技术研究进展

随着环保法规的日益严格,世界各国对清洁汽油中硫含量做出了严格的规定,汽油的低硫化甚至无硫化已成为一种必然趋势,汽油的深度脱硫技术已成为各石油公司和相关研究者的研究热点。渗透汽化是一种新型高效的膜分离技术,其在汽油深度脱硫技术方面具有独特优势。介绍了渗透汽化汽油脱硫技术的基本原理、工艺特点及国内外有关研究进展情况。     

亚硝酸型反硝化生物脱氮的节能机理及优化方案

须焦化污水处理工艺中，通过对亚硝酸型反硝化生物脱氮与硝酸型反硝化生物脱氮工艺的比较，探讨了需氧量、耗碱量及投资降低的机理。试验得出的优化方案是以NaOH为碱源的亚硝酸型反硝化生物脱氮工艺。     

基于自适应分块的动态场景HDR图像合成算法

通过提出基于梯度上升优化处理的自适应分块算法与基于图像序列梯度域运动检测与去除相结合的方法,自适应调整分块大小及动态区域块的融合权值,最终达到混淆去除的目的.同时,利用Gaussian中心函数窗口滤波,去除在分块融合过程中引入的块边缘不连续性痕迹.实验结果表明,该方法能快速有效地增强多曝光图像融合生成HDRI并去除混淆问题.     

无烟超薄型钢结构防火涂料的研制

介绍了无烟超薄型钢结构防火涂料的研制方法,将纳米有机-无机硅系阻燃剂应用到超薄型钢结构防火涂料中,改善了以往防火涂料单一使用APP阻燃剂而大量产生浓烟及有毒气体的缺陷。该防火涂料具有较好的耐火性能和装饰性能。     

Bumpy Particle Adhesion and Removal in Turbulent Flows Including Electrostatic and Capillary Forces

The effect of electrostatic and capillary forces on bumpy particle adhesion and removal in turbulent flows is studied. We use the JKR theory and account for the increase of adhesion by capillary force. The effects of electrostatic forces and nonlinear hydrodynamic drag are included in the analyses. The criteria for incipient rolling and sliding detachments and electrostatic lifting removal are evaluated. A turbulence burst model is used for evaluating the peak air velocity near the substrate. The critical shear velocities for detaching particles of different sizes under different conditions are evaluated. The electric field strength needed for electrostatic removal of particles with different charges is also estimated. The results are compared with those obtained in the absence of the capillary force. Comparisons of the model predictions with the available experimental data are also presented.     

MDEA法脱碳塔的扩产改造

通过对现有脱碳装置和运行条件的分析核算，提出了改造方案和实施措施，对改造前后参数和生产数据进行了对比和总结。     

Removal of chromium (VI) from dilute aqueous solutions by activated carbon developed from Terminalia arjuna nuts activated with zinc chloride

Different structured activated carbons were prepared from Terminalia arjuna nuts, an agricultural waste, by chemical activation with zinc chloride for the adsorption of Cr(VI) from dilute aqueous solutions. The most important parameter in chemical activation was found to be the chemical ratio (activating agent/precursor, g/g). Carbonization temperature and time are the other two important variables, which had significant effect on the pore structure of carbon. A high surface area of was obtained at a chemical ratio of 300%, carbonization time and temperature of 1 h and 500 °C, respectively. The activated carbon developed shows substantial capability to adsorb Cr(VI) from dilute aqueous solutions. The parameters studied include pH, adsorbent dosage, contact time, and initial concentrations. The kinetic data were best fitted to the Lagergren pseudo-first-order model. The isotherm equilibrium data were well fitted by the Langmuir and Freundlich models. The maximum removal of chromium was obtained at pH 1.0 (about 99% for adsorbent dose of 2 g/l and 10 mg/l initial concentration).