CH_4、CO_2与O_2制合成气的研究 Ⅱ工艺条件的影响

在固定床反应器中考察了１２％Ｎｉ－５％ＲＥ－２％Ｃｕ－２％Ｌｉ／Ａｌ２Ｏ３（ｍａｓｓ）催化剂在ＣＨ４、ＣＯ２与Ｏ２催化氧化重整制合成气反应中催化剂粒径、工艺操作条件（空速与温度）及原料气配比对反应的影响，确定了较佳的操作条件：催化剂粒径２０～４０目，反应最佳温度为８００℃，ＳＶ＝４×１０４ｍｌ／（ｇ·ｈ）。同时看到在不同的原料气配比的条件下该催化剂的活性亦很稳定，不仅达到了反应平衡，且产物Ｖ（ＣＯ）／Ｖ（Ｈ２）比有很强的调变性。     

Fischer-Tropsch synthesis on Fe-Mn ultrafine catalysts

The Fischer-Tropsch (FT) synthesis on Fe-Mn ultrafine catalysts prepared by a special degradation method of Fe-Mn complexes is presented. The effects of preparation method and Mn content on the FT performance are examined and the active phases and the role of Mn are elucidated.     

云母粒径对云母／聚丙烯性能的影响

研究了云母填充改性聚丙烯(云母/PP)中云母粒径对其性能的影响。实验结果表明:云母粒径越小使得云母/聚丙烯材料强度提高越大、断裂伸长率增加,加工流动性变好;同时也促进和有利于聚丙烯结晶过程中的成核作用。     

不连续增强镁基复合材料的界面行为

综述了近年来国内外关于Ａｌ２Ｏ３短纤维、ＳｉＣ晶须、ＳｉＣ颗粒、Ｂ４Ｃ颗粒增强镁基复合材料的界面结构及其对复合材料性能影响的研究进展，并对今后的研究提出了一些看法。     

三脉冲不等强度激光片光源的研制及应用

本文报道了最近研制成功三脉冲不等强度调Q红宝石激光片光源系统.利用小颗粒对片光源90°方向的散射光对动态颗粒场进行高速摄影,从底片中能够精确直观地判断微小颗粒的瞬时分布、运动方向、速度和加速度情况.     

高能粒子辐照对零膨胀微晶玻璃光学性质和面形光学稳定性的影响

研究了高能电子，高能质子对ＶＯ２微晶玻璃辐照前后光性质和面形光学稳定性的影响，研究结果表明，高能电子辐照能引起微晶玻璃面形明显变化，且使ＶＯ２微晶玻璃强烈着色。高能质子辐照没引起面形明显变化，高能质子辐照对反射光谱特性没有影响。     

复相陶瓷导电性与其粒径级配的关系研究

通过对无序渗流模型的修正，建立了具有不同特征尺寸的两相无序体系的导电模型，推导了相关关系式，将其结果与相复合导电陶瓷的实验结果进行了比较，结论相当一致。由此揭示了陶瓷生料的两相粒径分布对复合导电陶瓷导电性的影响。     

再论变化电磁场中带电超微粒子的精确量子论

利用创新的SU(1 ,1 )Lie代数理论及SO(3)Lie代数理论 ,得到变化电磁场中带电超微粒子的精确量子论 ,由此进一步明确微观领域中的时空概念     

NUMERICAL SIMULATION OF PARTICLE SEPARATION IN AN OIL-SAND SEPARATOR

ＮＯＴＡＴＩＯＮＳＡ　Ａｒｅａｏｆｉｎｌｅｔ ,ｍ2ａ　Ｃｅｎｔｒｉｆｕｇａｌａｃｃｅｌｅｒａｔｉｏｎ ,ｍ2 /ｓｉ　Ｇｒｉｄｏｆａｘｉａｌｄｉｒｅｃｔｉｏｎｍｌ 　ＭａｘｉｍｕｍｇｒｉｄｎｕｍｂｅｒｏｆｒａｄｉａｌｄｉｒｅｃｔｉｏｎＱ　Ｆｌｕｉｄｍａｓｓｒａｔｅ ,ｍ3/ｓＲｃ 　Ｍａｘｉｍｕｍｒａｄｉｕｓｏｆｃｙｃｌｏｎｅ ,ｍＲｅ　Ｒｅｙｎｏｌｄｓｎｕｍｂｅｒｒ　Ｄｉｍｅｎｓｉｏｎｌｅｓｓｒａｄｉａｌｄｉｓｔａｎｃｅｔ　Ｄｉｍｅｎｓｉｏｎｌｅｓｓｔｉｍｅｕ　Ｄｉｍｅｎｓｉｏｎｌｅｓｓａｘｉａｌｖｅｌｏｃ…     

Diagnostic Data Compression Techniques for Embedded Memories with Built-In Self-Test

A system-on-chip (SOC) usually consists of many memory cores with different sizes and functionality, and they typically represent a significant portion of the SOC and therefore dominate its yield. Diagnostics for yield enhancement of the memory cores thus is a very important issue. In this paper we present two data compression techniques that can be used to speed up the transmission of diagnostic data from the embedded RAM built-in self-test (BIST) circuit that has diagnostic support to the external tester. The proposed syndrome-accumulation approach compresses the faulty-cell address and March syndrome to about 28% of the original size on average under the March-17N diagnostic test algorithm. The key component of the compressor is a novel syndrome-accumulation circuit, which can be realized by a content-addressable memory. Experimental results show that the area overhead is about 0.9% for a 1Mb SRAM with 164 faults. A tree-based compression technique for word-oriented memories is also presented. By using a simplified Huffman coding scheme and partitioning each 256-bit Hamming syndrome into fixed-size symbols, the average compression ratio (size of original data to that of compressed data) is about 10, assuming 16-bit symbols. Also, the additional hardware to implement the tree-based compressor is very small. The proposed compression techniques effectively reduce the memory diagnosis time as well as the tester storage requirement.