Impedance spectroscopy study of hardened Portland cement paste

In this paper, the differential impedance analysis (DIA) has been applied to the study of the dielectric properties of hardened Portland cement paste. Two time constants are found in the impedance spectra obtained in the frequency region form 100 kHz to 15 MHz. One time constant has been attributed to the solid matrix and the other one to the liquid phase filling the pores. The effect of the cement paste-electrodes interface has been quantified using two different experimental set-ups. Measurements using direct contact between electrodes and cement paste have been compared with measurements using an air gap technique in which the specimen “floats” between the electrodes. The two referred time constants have been found in both types of measurements. The influence of drying on the dielectric parameters is also studied.     

Synthesis of thermosetting poly(phenylene ether) containing allyl groups

New thermosetting poly(2-allyl-6-methylphenol-co-2,6-dimethylphenol)s (3) have been developed by oxidative coupling copolymerization of 2-allyl-6-methylphenol (1) with 2,6-dimethylphenol (2), followed by thermal curing. Copolymerization was conducted in nitrobenzene in the presence of copper(I) chloride and pyridine as the catalyst under a stream of oxygen, producing high molecular weight copolymers (M_n∼50,000) with broad molecular weight distributions (M_w/M_n∼35). The structure of resulting copolymers 3 was characterized by IR, ¹H, and ¹³C NMR spectroscopy. Cross-linking reactions of copolymers were carried out by thermal treatment in the absence or presence of a peroxide (3 wt%, 2,5-dimethyl-2,5-di(tert-butylperoxy)-3-butane). The 10% weight loss and glass transition temperatures of the cured copolymers were 436 °C in nitrogen and 235 °C, respectively after curing at 70 °C for 1 h and 300 °C for 1 h. The average refractive index of the cured copolymer (3b) film was 1.5407, from which the dielectric constant (ε) at 1 MHz was estimated as 2.6. The ε and dissipation factor of copolymer-films at 1 MHz were directly measured from their capacitances as 2.5-2.6 and 0.0015-0.0019, respectively.     

Studies regarding simulation process to static loading of the structures obtained from polylactic acid, 3D printed

Being a relatively new process, additive manufacturing needs many studies to be able to produce parts with the required properties. The aim of the paper is to establish whether, based on the physical and mechanical properties determined by tensile testing and by applying finite element analysis (FEA), viable results can be obtained regarding the behavior of the 3D printed structures at the different, static loading. The application of FEA for the tensile testing of 3D specimens led to the results close to those obtained by the tests. The values of the results obtained by simulation are higher by up to 7.2% compared with those recorded by tests. The simulation was applied both for the printed specimens from a single material and from two materials (multi-material). Regardless of the materials used in printing and the simulation method, the results of applying FEA are close to those recorded by testing.     

Image-based extended finite element modeling of thermal barrier coatings

Further advances in Thermal Barrier Coating (TBC) design are linked with the evolution of numerical models for TBCs. The present paper, therefore, enhances the idea of a currently available FEM package (OOF) that has been designed for microstructural level simulations. The approach of Extended FEM (XFEM) is incorporated in an in-house developed program to account for the existence of cracks in TBCs; both for stress-strain analysis and for heat transfer analysis. The new XFEM program is then employed to carry out the analyses of a YSZ deposit and a multilayered TBC to predict the effective Young's moduli, the overall thermal conductivities, and to assess the fracture behavior of the coating.     

Thermophysical properties of a Ti–44%Al–8%Nb–1%B alloy in the solid and molten states

The families of titanium aluminide intermetallic alloys have attractive high temperature mechanical properties which make them potential candidate materials for a wide range of applications, particularly in the aeronautic and automobile sectors. The development of appropriate manufacturing techniques is an essential stage in the engineering exploitation of these materials, e.g., Induction Skull Melting is one of the techniques which needs to be optimised for the casting of titanium aluminides. Research is underway to develop a computer model of this process but data are required for the key thermophysical properties. Pulse-heating techniques have been used to measure properties for the Ti–44Al–8Nb–1B system. Rectangular samples have been prepared and are resistively heated as part of a fast capacitor discharge circuit. Time-resolved measurements with sub-μs resolution of currents through the specimen were made with a Pearson probe current monitor using the induction principle. Voltages across the specimen were determined with knife-edge contacts and voltage dividers, and radiance temperatures of the sample were measured with a pyrometer. These measurements allow the calculation of specific heat and dependencies between enthalpy, electrical resistivity and temperature of the alloy up into the liquid phase. Data for thermal diffusivity have been obtained by using the Wiedeman–Franz relation. The results are compared with those obtained using DSC and the four-probe method to measure the temperature dependence of the resistivity.     

Effects of coating thickness and residual stresses on the bond strength of ASTM C633-79 thermal spray coating test specimens

Wire-arc-sprayed nickel-aluminum is widely used in the aircraft industry for dimensional restoration of worn parts and as a bond coat for thermal barrier coatings and other top coats. Some repair applications require thick coatings, which often result in lower bond strength. A mechanism being investigated to ex-plain this decrease in bond strength is the free edge effect, which includes both coating residual stresses and coating thickness. The layer-removal method was used to determine experimentally the residual stresses in wire-arc-sprayed nickel-aluminum coatings of different thicknesses. Bond strength evalu-ations were performed using an improved ASTM C 633-79 test specimen. Finite-element analysis and fracture mechanics were used to investigate the effects of coating thickness and residual stress state on coating bond strength.     

DEPENDENCE OF PREDICTION MODEL OF FORMING LIMIT STRAINS ON FORMING METHOD AND MECHANICAL PROPERTIES OF SHEET METALS

ＤＥＰＥＮＤＥＮＣＥＯＦＰＲＥＤＩＣＴＩＯＮＭＯＤＥＬＯＦＦＯＲＭＩＮＧＬＩＭＩＴＳＴＲＡＩＮＳＯＮＦＯＲＭＩＮＧＭＥＴＨＯＤＡＮＤＭＥＣＨＡＮＩＣＡＬＰＲＯＰＥＲＴＩＥＳＯＦＳＨＥＥＴＭＥＴＡＬＳ①ＺｈｏｕＷｅｉｘｉａｎＤｅｐａｒｔｍｅｎｔｏｆＡｅ...     

Ag-Cu-In-Sn合金的结构特性

借助金相、X光衍射及SEM方法研究Ag-Cu-In-Sn合金的结构特性及合金各组元在合金相中的分布规律,还讨论了某些相结构对合金力学性能的影响。四元合金的化学成分是(wt％)57～63Ag,17～23Cu,(20—x)In,xSn,其中:Ag+Cu=80wt％,In+Sn=20wt％,2≤x≤16。