高速钢高温形变诱发析出的研究

本文探讨了高速钢在高温形变过程中碳化物析出的行为及奥氏体组织状态对析出的影响。用透射电镜和扫描电镜分析了不同热处理状态奥氏体的组织结构,分析了高温形变过程中碳化物析出的部位,颗粒尺寸及形态。试验表明, 碳化物主要在奥氏体的缺陷处呈点状和点列状析出,大小为20mμ。处于回复状态的奥氏体缺陷诱发碳化物析出,析出碳化物钉札缺陷阻止再结晶进行。当再结晶驱动力较大时,由于动态再结晶充分发展,使缺陷大量消除,碳化物析出显著地减少。     

Bayes estimators for reliability measures in geometric distribution model using masked system life test data

This paper presents Bayes estimators for the reliability measures of the individual components in a multi-component systems in the presence of masked system life test data. The life time distributions of the system components are assumed to be geometric with different parameters. Two-sided Bayesian probability intervals of the parameters are also derived. Numerical simulation study is given in order to: (i) explain how one can apply the theoretical results obtained, (ii) study the influence of the sample size and masking level on the accuracy of point estimates.     

煤岩配煤在湘钢焦化厂的应用

论述了湘钢目前利用煤岩学数据指标判定进厂煤质情况,指导煤场分堆,优化配煤结构.同时在保证焦炭质量稳定的前提下,配入少量低灰的气煤,有效地提高了焦炭质量.     

链条锅炉的节能改造

本文针对株洲硬质合金厂SHL20—13—AII型20t蒸汽链条锅炉存在的问题，进行了节能改造，取得了显著的成效。     

Rolling and Lifting Probabilities for Sediment Entrainment

This study addresses the rolling and lifting probabilities for sediment entrainment by incorporating the probabilistic features of the turbulent fluctuation and bed grain geometry. The lognormally distributed instantaneous velocity and uniformly distributed initial grain position, along with a relation between lift coefficient and particle Reynolds number, are used to extend the theoretical formulation of the entrainment probabilities in smooth-bed flows. The two threshold conditions identified herein enable us to precisely define the probabilities of entrainment in the rolling and lifting modes. The results obtained in this study coincide well with the published data. The lifting probability increases monotonously with the dimensionless shear stress θ, which is consistent with the earlier results yet displays improved agreement with the experimental data. The maximum value of rolling probability, with a magnitude of 0.25, occurs at θ ≈ 0.15. For θ<0.05 (or θ>0.6), the rolling (or lifting) probability makes up more than 90% of the total entrainment probability and thus can be used as an approximation to the total probability of entrainment. The proposed rolling and lifting probabilities are further linked to the two separate criteria for incipient motion to explore the critical entrainment probabilities. The results reveal that a consistent probability corresponding to the critical state of sediment entrainment cannot be found.     

自蔓延高温合成TiNi多孔体合金

为了开发新型的生体材料，本文对自蔓延高温合成TiNi多孔体合金——人造骨材料进行了研究。以单质钛粉和镍粉作原料，在氩气保护条件下，采用预热点燃模式和热爆模式制得了不同形态的多孔TiNi形状记忆合金。采用SEM和XRD分析了样品的孔洞特征和相组成，测试了其力学性能，并研究了合成条件参数与样品表面形貌和孔隙状态之间的关系。结果表明，用SHS法制备TiNi多孔体合金是可行的。     

混凝土骨料二维分布的模拟和应用

通过在一个矩形截面上模拟混凝土骨料的实际分布，获得了该截面上任一点的骨料分布密度和骨料分布的统计特性。模拟结果表明，当模拟次数趋向于无穷大时，截面上任一点的骨料分布密度趋向于定值，对于不同的骨料面积百分数，骨料分布密度曲线的形状十分相似，均由上升段和水平段两部分组成。基于这些模拟结果，利用数学拟合获得了骨料分布密度的解析表达式，并被混凝土实验所初步证实。作为一个应用，本文计算了混凝土截面上各点的氯离子扩散系数。     

固定式宽带无线接入技术--LMDS

本地多点分配业务(LMDS)是近年来在国际上兴起的固定式宽带无线接入技术,具有传输容量大、起始费用低的优点,受到了国内外电信业务经营者的普遍关注.文章介绍了LMDS提供的业务类型、工作频率、系统结构和标准化情况,并将LMDS与有线电视网络、ADSL、MMDS等现有的接入技术进行了比较.文章认为LMDS的商业推广尚需解决信号质量、服务区尺寸、费用等制约因素.     

推进石化销售企业质量管理创新发展

对照IS0 9001质量管理体系标推的要求，结合石化销售企业质量管理工作中存在的主要问题，提出质量管理工作创新的建议。     

Powder Deposition in Three Parallel-Oriented Dies of Different Shapes

Uniformity of bulk density distribution during the die filling process is required to minimize quality problems, such as distortion and cracking, for powder compacts. Understanding the die filling process is necessary in ensuring a uniform powder deposition. The second-generation pressure deposition tester (PDT-II) was used to investigate the deposition process and final pressure distribution of powder filling in toroidal, cylindrical, and E-shaped dies. All tests were conducted using a spray-dried free-flowing granular powder. The results indicated that for toroidal dies: (1) the area around 0° orientation (the leeward end) had the highest pressure values (1186.7 to 2498.0 Pa), with the average pressure values of the remaining area 353.7-648.0 Pa; (2) the pressure distribution was symmetrical about the centerline parallel to the feed shoe movement direction; (3) the highest feed shoe speed (500 mm/s) led to the most nonuniform pressure distribution among the three speeds; (4) higher feed shoe speed did not always result in higher final pressure values; and (5) the right die tended to have higher final pressure values (215.0 to 2498.0 Pa) than the center die (95.4 to 2052.5 Pa). For E-shaped dies: (1) the final pressure values of the middle leg (308.9 to 760.7 Pa) were higher than those of the left and the right legs (148.9 to 530.3 Pa); (2) the area along the backside had the highest final pressure value (1054.6 to 1303.8 Pa); (3) the pressure distribution was symmetrical about the centerline parallel to the feed shoe movement direction; and (4) neither the center die nor the right die always had higher pressure values than the other one at all locations. Comparison between cylindrical and toroidal dies indicated that: (1) neither of the two die shapes (cylinder and toroid) led to consistently higher or lower final pressure values at all locations and (2) for all three feed shoe speeds, the toroidal die had higher average final pressure values in the 0° orientation.