中密度纤维板组合施胶系统技术探讨

详细地介绍了中密度纤维板干燥前与干燥后组合施胶系统技术原理、技术优势及其在生产线上的实际应用,详细地分析了应用过程存在的主要问题及其产生原因,并对其后续使用提出了建议.     

限形压具在薄壁件锥盘中的应用

研究锥盘淬火变形的原因,改进设计限形淬火压具,使薄壁件锥盘的淬火变形报废率由25％下降到5％以下,经济效益和社会效益十分显著。     

改进自适应中值滤波的图像去噪

传统自适应中值滤波的最大最小窗口尺寸固定,并且其最大最小窗口相差较大时,运算时间较长,去噪效果并小一定最佳。本文针对传统自适应中值滤波算法的不足,提出了改进自适应中值滤波算法,首先根据椒盐噪声的分布特点,从单幅含椒盐噪声图像中估算出椒盐噪声的浓度,并分析噪声浓度与自适应中值滤波窗口尺寸之间的关系,建立它们之间的函数关系一其次根据噪声浓度确定自适应中值滤波的最大最小窗口尺寸,最后对图像进行自适应中值滤波：实验结果表明本文算法运算时间随着噪声浓度的变化而变化,而且从PSNR角度来看本文去噪效果比传统自适应中值滤波效果较好。     

Enhanced Anti-Cancer Effects of Conditioned Medium from Hypoxic Human Adult Dermal Fibroblasts on Cervical Cancer Cells

Hypoxia regulates fibroblast function by changing intracellular signaling and secretion factors, that influence the states of nearby cells. In this work, we investigated how medium (CM) from human adult dermal fibroblasts (HDFs) cultured in normoxic and hypoxic conditions affected cervical cancer (HeLa) cells. The HeLa cells showed decreased cell viability, increased apoptosis, and cell cycle arrest in response to CM from hypoxic-cultured HDFs (H-CM) compared with CM from normoxic-cultured HDFs (N-CM). Among the proteins up-regulated (>2-fold) in H-CM compared with N-CM, lymphotoxin-beta receptor (LTBR) decreased the viability of HeLa cells. Among the intracellular proteins down-regulated (>2-fold) in HeLa cells treated with H-CM compared with N-CM, the most enriched biological process GO term and KEGG pathway were protein deubiquitination and hsa05166:HTLV-I infection, respectively. In the protein–protein interaction network of intracellular proteins with altered expression (>2-fold), 1 up-regulated (TNF) and 8 down-regulated (ESR1, MCL1, TBP, CD19, LCK, PCNA, CHEK1, and POLA1) hub proteins were defined. Among the down-regulated hub proteins, the most enriched biological process GO term and KEGG pathway were leading strand elongation and hsa05166:HTLV-I infection, respectively. This study reveals that H-CM had stronger anti-cancer effects on cervical cancer cells than N-CM and induced intracellular signaling patterns related to those enhanced anti-cancer effects.     

中国大中型气田天然气的运聚特征

中国重点盆地大中型气田天然气的运聚具有多种途径和方式,归纳起来具有如下特点:区域构造运动是造成天然气运移的决定性控制因素;流体势决定天然气运移的方向和聚集的场所。在断陷盆地中,天然气以垂向和阶梯状运移为主;在克拉通、前陆斜坡和大型坳陷盆地中,天然气以侧向运移为主,垂向运移也起重要作用。断裂和不整合面是天然气运移的主要通道;异常压力是高压盆地天然气运移的主要动力,地热对热盆天然气的运移具有一定的影响;盆地的上倾方向和古隆起是天然气运移的指向区。     

基于多目标混料设计的重介质旋流器混料成分配比

为了准确掌握重介质旋流器各混料成分之间的配比关系,明确不同配比对旋流器产出质量和产量的影响,实现分选效果的最优化.分析了现有旋流器优化和混料配比研究的不足,探讨了采用混料设计方法解决上述问题的可行性和局限性。通过设计混料试验,运行试验得到试验结果,建立混料成分与各响应变量的数学模型,分析模型的有效性,以各响应变量的同时最佳为综合约束条件进行响应优化,通过求解苛求函数复合合意度最高时的各参数值,确定各混料成分的最优配比,并通过T假设检验验证试验结果用于生产的有效性。结合某选煤厂旋流器生产运行情况,明确旋流器中块煤、悬浮液和煤泥各混料的水平要求,采用极端顶点法设计混料试验并运行试验,建立三因子与精煤灰分和产率两个响应变量之间的回归模型,分析两响应变量同时最佳条件下最优的混料配比,得到三混料成分配比依次为15.5%、59.8%、24.7%,依据上述配比进行试生产,并采用T检验验证试验结果是有效的,从而为选煤厂高效生产和精确控制提供有效的支撑,也为后期实现自动化控制提供了可能。     

中密度纤维板生产减排技术研究与应用

对中型中密度纤维板生产中造成环境污染的污染源、污染因子进行了分析研究,根据同类企业实际运行情况提出了治理途径和解决措施。     

Preparation and photoluminescence properties of γ-KCaPO4: Eu phosphors for near UV-based white LEDs

Novel whitish-blue phosphors based on a phosphate host matrix, γ-KCaPO₄: Eu²⁺, were prepared by a conventional solid-state reaction method using slightly phosphorus deficient conditions and their photoluminescence properties were investigated. The concentration quenching process, temperature dependence of the luminescence and decay curve were also investigated. The γ-KCaPO₄: Eu²⁺ phosphor was efficiently excited by UV-Visible light at wavelengths of 200-450 nm and exhibited a bright whitish-blue emission with a maximum peak wavelength of 473 nm. All of these characteristics suggest that the γ-KCaPO₄: Eu²⁺ phosphors combined with red phosphors could be applicable to near UV-based white LEDs, i.e., only two kinds of phosphor powders are needed for the formation of white light.     

Modeling radiative properties of nanoscale patterned wafers

Temperature nonuniformity in rapid thermal processing of wafers is a critical problem facing the semiconductor industry. One cause of the problem is the nonuniform absorption of thermal radiation in patterned wafers where the optical properties vary across the wafer surface. This paper presents a parametric study of the radiative properties of patterned wafers, considering the effect of temperature, wavelength, and polarization. The finite-difference time-domain (FDTD) method is employed to examine the effe...