New Ferro Powder for Selective Laser Sintering of Dense Parts

The paper describes a new powder composition specially developed for selective laser sintering (SLS). The aim is to obtain a ferro powder that can be sintered without need for a (sacrificial) polymer binder and that results in quasi dense parts that do not need any post-processing like furnace sintering, infiltration or HIP. The powder is a mixture of different types of particles (Fe, Cu, Ni and Fe₃P). The composition and mixture ratio are justified by using phase diagrams. The powder has been tested using an own developed Nd: YAG SLS machine. The influence of process parameters (laser power, scan velocity, scan spacing and scan strategy) and the microstructural characteristics have been investigated. Attention is devoted to the binding mechanism (liquid phase sintering, through melting) and to the quality of resulting parts (density, balling effect,…).     

Precipitation behavior of σ phase in fusion zone of dissimilar stainless steel welds during multi-pass GTAW process

The purpose of this study is to investigate the precipitation characteristics of σ phase in the fusion zone of stainless steel welds at various welding passes during a tungsten are welding (GTAW) process. The morphology, quantity, and chemical composition of the δ-ferrite and σ phase were analyzed using optical microscopy (OM), a ferritscope (FS), a X-ray diffractometer (XRD), scanning electron microscopy (SEM), an electron probe micro-analyzer (EPMA), and a wavelength dispersive spectrometer (WDS), respectively. Massive δ-ferrite was observed in the fusion zone of the first pass welds during welding of dissimilar stainless steels. The σ phase precipitated at the inner δ-ferrite particles and decreased δ-ferrite content during the third pass welding. The σ and δ phases can be stabilized by Si element, which promoted the phase transformation of σ→ϱ+λ₂ in the fusion zone of the third pass welds. It was found that the σ phase was a Fe−Cr−Si intermetallic compound found in the fusion zone of the third pass welds during multi-pass welding.     

双焊缝方矩形钢管生产工艺介绍

介绍了双焊缝方矩形钢管生产技术的特点及冷弯等边槽钢孔型设计参数.通过双焊缝方矩形钢管用冷弯等边槽钢的孔型设计、生产,实现了大截面双焊缝方、矩形钢管的生产,满足了客户的需求.     

高功率激光焊接光致等离子体的检测

系统地归纳了高功率激光焊接过程中光致等离子体的声、光、电、热等四种特征信号,综述了国外在等离子体信号检测方面的试验方法及研究进展,分析了未来的发展趋势。     

煤气管道膨胀节腐蚀和在线包焊技术应用

简单分析了高炉煤气中Cl元素的存在对不锈钢膨胀节的应力腐蚀问题和防止途径，作为一种临时性的防范措施，简要介绍了煤气膨胀节包焊实施步骤和措施。     

新型单片机控制熔化极脉冲氩弧焊机

采用一种新型弧压反馈闭环控制方式，在每一个周期内都可以保证电弧电压的平均值相同，可以实现稳定可靠的弧长调节。控制系统完全由软件控制器实现，人机界面友好。根据一个脉冲过渡一个熔滴的原则选取脉冲参数，在大量工艺试验的基础上．对脉冲参数的匹配关系进行了优化。试验表明，该机一个脉冲过渡一个熔滴的稳定区间较宽，电弧自身调节能力强，焊缝成形美观，几乎没有飞溅。研制的单片机控制的IGBT逆变式熔化极脉冲氩弧焊机工作可靠，已经投入批量生产。     

一种识别薄板对接接头的视觉方法

对薄板紧密对接接头的识别问题进行了深入的分析，提出了由照明、自适应局部特征提取、全局特征识别和验证融合在一起的视觉识别方法。它克服了电弧光的干扰，识别结果可靠，可以有效地解决薄板紧密对接接头识别这一难题。     

金属快速凝固方法的数学模型

本文综述了与几种典型的快速凝固方法相应的数学模型，并对每种模型作了相应的分析和评价。文中重点介绍了“活塞－砧法”，“双辊法”，“单辊法”和“雾化沉积法”数学模型的理论基础，建模过程，理论优缺点及实用局限性。     

激光焊接超细基胎体金刚石薄壁钻

采用激光焊接超细预合金粉胎体，开发了新的薄壁钻产品，通过对与现有的产品工艺、性能测试以及实际使用分析对比，结果表明：激光焊接与普通钎焊相比结合强度提高2－3倍，克服了胎体脱落问题，胎体耐磨性提高了50％－120％，其中轴向磨损速率提高1．2倍；钻削速度提高30．4％，工矿适应性增加，使用寿命提高25％－108％。     

Hastelloy B-2封头加工

HastelloyB - 2是哈氏合金中最难制造和加工的镍基合金之一 ,尤其是化工容器中的封头 ,其制作工艺过程较复杂 ,这种材料较昂贵 ,目前在国内化工行业应用很少 ,因此掌握这种材料的制造技术具有重要的意义 ,本文阐述了HastelloyB - 2封头的坯料焊接、旋压成形、固溶处理及酸洗等工艺过程。