Bulk modification of styrene–butadiene–styrene triblock copolymer with maleic anhydride

The bulk modification of SBS rubber with maleic anhydride in a mixing chamber of a Haake rheomixer was studied. The effect of temperature, maleic anhydride, and benzoyl peroxide concentrations on the grafting efficiency was evaluated. High grafting efficiency was achieved when the ratio of peroxide and maleic anhydride concentration was high. On the other hand, on this condition high insoluble fraction was generated. The addition of a diamine, 4,4′‐diaminediphenylmethane to the reaction mixture minimizes the amount of insoluble polymer. However, the grafted MAH content also decreases. The graft copolymer was characterized by infrared spectroscopy and the grafting extension was determined by titration. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2953–2960, 2002; DOI 10.1002/app.10355     

热采水平井整体开发草13块砂砾岩薄层特稠油

热采水平井技术是科学有效开发稠油油藏的重要手段。以胜利油田草13块为例，系统论述了利用热采水平井整体开发具有边底水的砂砾岩薄层特稠油油藏的开发程序和研究方法。在油蒇精细描述的基础上，通过热采筛选、产能评价、直井和水平井数值模拟、开发方式优化及指标预测等油藏工程研究技术方法，综合论证了利用热采水平井整体开发草13块的必要性和可行性，总结了砂砾岩薄层特稠油油藏水平井油藏工程设计中应遵循的原则，并在生产实践中见到明显效果，为胜利油田其它区块和类似油田的开发提供了借鉴和指导。     

稠油油藏的注汽量预测

利用HCZ预测模型，可对已开发油田的年产量和累计产量进行全程预测，并且在实际应用中取得了较好的预测结果。本文结合稠油田的实际情况，推导出HXZ预测模型在热采中注汽参数的预测公式。结合曙光油田曙1－7－5块的开发数据进行了预测，效果较好。     

Williams高压旋转防喷器国产化要点浅析

旋转防喷器是欠平衡钻井的关键井控设备之一，现文以Williams7100型高压旋转防喷器为例，分析了其壳体总成、旋转总成以及钻具密封的设计分析要点，旨在推动该装置的国产化进程。     

Superplastic behaviour of Ti-48at.%Al two-phase titanium aluminide compacts made from mechanically alloyed powder

An HIP compact of MA-processed powder having a nominal composition of Ti-48at.% Al was produced. The compact consisted of a large amount of TiAl(λ) and a small amount of Ti₃Al (₂), in a completely ultra-fine equiaxed grain structure. This two-phase compact showed typical superplastic deformation behaviour. A maximum elongation of 550% was obtained. A strain exponent, n = 2, and grain size exponent, p = 2, were determined from the results of a strain-rate-change test and a creep test at constant initial stress using samples having various grain sizes, respectively. The activation energy for creep, Q_c at constant stress was calculated to be 350 kJ/mole. It is concluded that the superplastic deformation mechanism of the material under study is grain boundary sliding controlled by lattice diffusion in the TiAl phase.     

锦45块“八五”期间新增可采储量技术途径研究

方法 利用注采特征曲线，对锦４５块“八五”期间新增可采储量进行了计算研究，目的 研究蒸汽吞吐阶段增加可采储量的途径，为同类油藏的合理开发提供依据，结果 蒸汽吞吐阶段增加可采储量的三项技术途径；一是加大滚动勘探开发力度，不断发现和投入新储量；二是开展油藏工程研究，搞清油水分布，合理部署调整井，三是综合治理，增加可采储量。结论 “八五”期间，利用上述技术途径，改善了锦４５块开发效果，新增可采储量２７１     

A new approach to the mechanism of chlorine evolution: Separate examination of the kinetic steps using ac impedance on a rotating thin ring electrode

In the absence of a bulk diffusion effect, it is shown for the first time that the impedance spectra for the chlorine evolution reaction on a rotating thin ring electrode comprise three consecutive semicircles in the capacitive half of the complex plane. The first (highest frequency) semicircle is due to the charge-transfer resistance for chloride discharge and the simultaneous chlorine adsorption coupled to the double-layer capacitance. The second semicircle (around 5 Hz) is due to the adsorption and desorption of a chlorine intermediate. The third (lowest frequency, around 0.5 Hz) semicircle is due to the relaxation of surface oxygen species. The impedance data allow the steps of the overall reaction to be examined individually. On a Pt surface the rate of chloride discharge and simultaneous chlorine adsorption (the admittance of the first semicircle) is first order with respect to chloride concentration and has a potential-dependence close to 58 mV/decade. The rate of the adsorption and desorption process (the admittance of the second semicircle) is second order with respect to chloride concentration, and has a potential dependence close to 30 mV/decade. The time constant for the adsorption/desorption processes is ca 20 ms, independent of electrode potential in the range studied. These features are consistent with a mechanism in which a faster discharge reaction (Cl⁻ Cl_ad + e) is followed by a slower surface combination reaction (2Cl_ad → Cl₂), but inconsistent with mechanisms in which ion + atom desorption is predominant, the initial chloride discharge is slow, or a unipositively charged chlorine species is involved.     

n-Al2O3/Ni复合镀层的组织与滑动磨损性能研究

用电刷镀技术制得了镍基n-Al2O3复合镀层，并对镀层的滑动磨损性能进行了试验研究。纳米复合镀层的表面形貌比较细腻，镀层中纳米粒子分布均匀，与基质金属结合紧密。镀层显微硬度达到HV700，比快速镍镀层提高约40％。滑动磨损试验结果表明，随着纳米粒子含量的增大，镀层的耐磨性提高，摩擦系数也呈增大趋势；但当镀层中n-Al2O3粒子的超过2.56%(质量分数）时，镀层的耐磨性显著下降。纳米复合镀层的磨损机制以疲劳磨损为主，而快速镍底层以粘着磨损为主。     

Experience with Applying Formal Methods to Protocol Specification and System Architecture

In the last three years or so we at Enterprise Platforms Group at Intel Corporation have been applying formal methods to various problems that arose during the process of defining platform architectures for Intel's processor families. In this paper we give an overview of some of the problems we have worked on, the results we have obtained, and the lessons we have learned. The last topic is addressed mainly from the perspective of platform architects.     

HYQ-965-Ⅲ解堵剂的研制及现场应用

针对涠洲11-4油田W11-4D-A1井返吐油基泥浆堵塞油管问题,以渗透剂、乳化剂、分散剂、互溶剂为原料,制备了HYQ-965-Ⅲ解堵剂.考察了不同配方解堵剂中原料间的配伍性和溶垢效果,研究了最佳配方:渗透剂Ⅰ20%、乳化剂Ⅰ10%、分散剂10%、互溶剂10%、海水50%.将该解堵剂在W11-4D-A1井进行应用,从现场使用情况看,HYQ-965-Ⅲ对油基泥浆、原油具有很好的分散能力,成功解除了油管堵塞,达到预期设计要求.