无定位图的预测误差差值扩展可逆数据隐藏*

将Tian差值扩展技术应用于彩色图像中,提出一种利用预测误差差值进行扩展嵌入的彩色图像可逆数据隐藏算法。针对传统差值扩展技术存在过分修改像素灰度值、须嵌入定位图等缺点,首先利用色彩分量间的相关性减小差值,并将差值扩展量分散到两个色彩分量中;其次,对直方图平移技术进行改进,使得同等嵌入率下图像质量达到最佳;最后由两个色彩分量中像素的预测值之和决定可用于扩展嵌入的像素,无须保存溢出定位图,提取端在提取信息时可无损地恢复原始图像。实验结果表明,与其他算法相比,该算法在同等嵌入率下可取得更好的图像质量,算法复杂度     

DCAM平台下的分布式方面构件模型及协同框架的研究*

由于方面化中间件平台DCAM的方面内核实现机制没有提供对分布式环境下方面构件通信的支持,扩展了DCAM中方面内核的方面调用机制,提出了分布式方面构件模型以及分布式环境下方面构件的协同框架。扩展后的DCAM平台不仅保持了原平台对POJO的支持,同时通过对分布式协同框架的引入,使平台在分布式环境下具有更好的可扩展性和容错性,满足了按需计算的需求。最后通过应用实例对DCAM的分布式模型进行了可行性验证并给出了性能分析。     

一种光纤陀螺随机漂移的高精度建模方法

为减小光纤陀螺随机漂移,采用时间序列分析法对其进行ARMA模型辨识.提出一种全局最优的模型阶次搜索算法,将模型适用性检验方法中的BIC(Bayesian information criterion)用于模型阶次搜索,并采用Pandit-Wu建模思想,把二维搜索化为一维搜索,得到了模型阶次的一致性估计.提出了一种改进的U-C算法,并与长自回归模型计算残差法相结合共同估计模型参数.它将非线性参数估计过程转化为线性过程,使用了正置与逆置漂移时序参与估计,以前向和后向模型的滤波误差平方和最小为参数估计的指标,在p+1维空间中求极小值.采用上述方法确定的模型其残差标准差为0.002 4°,最大预报误差为0.011 2°,能准确预报光纤陀螺随机漂移趋势.     

Modeling large reversible electric-field-induced strain in ferroelectric materials using 90° orientation switching

Reversible large electric-field-induced strain caused by reversible orientation switchings in BaTiO3 is modeled using the Landau's theory of phase transition. A triple well free energy function is constructed. Each of its minima is associated with one of the polarization orientations involved. Nonlinear constitu- tive laws accounting for reversible orientation switchings and electrostriction effects are obtained by using thermodynamic equilibrium conditions. Hysteretic dynamics of one-dimensional structures is described by coupled nonlinear differential equations. Double hysteretic loops in the electric and me- chanic fields are both successfully modeled. Giant reversible electrostriction is modeled as a conse-quence of reversible orientation switchings via electro-mechanical couplings. Comparisons with ex-perimental results reported in literatures are presented.     

Asymptotic state behaviour and its modeling for saturated sand

A new double hardening elasto-plastic model is proposed in this paper based on the existing unified hardening model (UH model). By assuming that there is part coupling effect between the plastic volumetric strain and plastic shear strain, hardening parameters consisting of a coupled and an uncoupled components are adopted in this model. A unique feature of this model is that it can describe not only the conventional drained and undrained behaviors of soil, but also the stress-strain relationships of soil under partially drained conditions which can be volumetric compression or dilation. Adopting the asymptotic state concept, simple equations for estimating the limiting stress ratio under undrained or earth pressure at rest (i.e. K ₀) conditions are derived. The new model is relatively simple to be adopted in practice for two reasons. First, the same soil parameters as in Cam-clay model are used except the addition of one extra parameter, the stress ratio at the characteristic state. Second, all the parameters can be determined using conventional triaxial compression tests. Supported by the National Natural Science Foundation of China (Grant Nos. 10672010 and 50479001) and the National Earthquake Science Item (Grant No. 200808076)     

Numerical study on the restriction speed of train passing curved rail in cross wind

The results of numerical investigations of aerodynamic forces and moment coefficients of flow passing a simplified train geometry under different wind speeds are summarized. To compute numerically the different coefficients, the three-dimensional Reynolds-Averaged Navier-Stokes (RANS) equations, combined with the k-ε turbulence model, were solved using finite volume technique. The pres-sure-velocity fields were coupled using the SIMPLE algorithm. At each iteration the pressure correction was obtained by sol...     

Dendrite crystal morphology evolution mechanism of β-BaB_2O_4 crystal

Existence of [B3-O6]3- hexagonal ring growth unit in melt solution of β-BaB2O4 crystal was proved by the results of high temperature Raman measurements.A morphology evolution process of β-BaB2O4 crys-tal was observed by a high temperature in-situ observation device.The crystal morphology varied with the supersaturation of growth melt solution.The mechanism of β-BaB2O4 crystal morphology evolution was analyzed through the growth unit model.     

Mold deformation in soft UV-nanoimprint lithography

UV-nanoimprint lithography (UV-NIL) using a soft mold is a promising technique with low cost and high throughput for producing the submicron scale large-area patterns. However, the deformations of the soft mold during imprinting process which can cause serious consequences have to be understood for the practical application of the process. This paper investigated the deformation of the soft mold by theoretical analyses, numerical simulations, and experimental studies. We simulated the mold deformation using a simplified model and finite element method. The simulation and the related experimental results agree well with each other. Through the investigation, the mechanism and affected factors of the mold deformation are revealed, and some useful conclusions have been achieved. These results will be valuable in optimizing the imprinting process conditions and mold design for improving the quality of transferred patterns.     

车辆-轨道-桥梁空间耦合振动引起的环境振动

首先建立了车辆-无碴轨道-桥梁系统空间耦合振动模型,通过随机振动分析得到桥墩墩底反力,然后建立了土体-建筑物的三维有限元模型,并将以上得到的墩底反力作为土体-建筑物三维有限元模型的外部激励。分析结果表明,周围土体振动强度随距离的增加而减小,且都存在反弹区 周围建筑物的振动强度随桥墩距离的增大而减小,且在建筑物低层横向和竖向振动相差不大,但是到了高层处横向振动明显大于竖向振动。     

供电公司运营效率与影响因素分析

运营效率是衡量企业投资效益和资源配置的核心指标,因此,有效提高运营效率是增强供电公司竞争力的重要途径之一。结合供电公司的实际情况,构建了基于SE-DEA的供电公司运营效率评价模型,借助MATLAB数学分析软件,从投入和产出的角度对8家供电公司的运营效率进行比较,详细地分析了影响其效率的主要因素,并针对问题提出了优化运营的有效措施。实例结果表明,此方法实现了对所有决策单元的充分评价与排序,可以对供电公司运营效率进行有效的评价,为管理者提供科学、有效的信息和决策的依据。