Fully Programmable Memory BIST for Commodity DRAMs

To accomplish a high‐speed test on low‐speed automatic test equipment (ATE), a new instruction‐based fully programmable memory built‐in self‐test (BIST) is proposed. The proposed memory BIST generates a high‐speed internal clock signal by multiplying an external low‐speed clock signal from an ATE by a clock multiplier embedded in a DRAM. For maximum programmability and small area overhead, the proposed memory BIST stores the unique sets of instructions and corresponding test sequences that are implicit within the test algorithms that it receives from an external ATE. The proposed memory BIST is managed by an external ATE on‐the‐fly to perform complicated and hard‐to‐implement functions, such as loop operations and refresh‐interrupts. Therefore, the proposed memory BIST has a simple hardware structure compared to conventional memory BIST schemes. The proposed memory BIST is a practical test solution for reducing the overall test cost for the mass production of commodity DDRx SDRAMs.     

松散煤体低温氧化放热强度的测定和计算

根据煤低温自然火实验台测定的温度场变化和传热理论,推导出计算不同温度松散煤体低温氧化放热强度的热平衡法;由实验测定的气体浓度变化量,推算出不同温度时煤氧复合的耗氧速率、ＣＯ和ＣＯ２产生率;结合煤氧复合过程的键能量变化量,得出低温氧化放热强度的键艰算法,确定其上限和下限,为煤自燃特性的定量分析及自然发火预测提供了理论依据。     

金属化有机薄膜电容器的自愈机理及可靠性设计

金属化有机薄膜电容器在制造过程中由于金属化电极发生连续性自愈，致使制造工艺失控。根据自愈机理，采取控制外加压力和电压，恰当选择金属化膜方阻等措施，从而改善工艺，降低废品率。     

NdLMA激光器的附加脉冲锁模

用半导体激光泵浦ＮｄＬＭＡ激光器在１．０５４μｍ波长处获得连续６５０ｍＷ的激光输出，斜效率达３３％。利用一个包含光纤的非线性外腔，实现了自启动的ＮｄＬＭＡ附加脉冲锁模，输出平均功率为５８ｍＷ的接近带宽转移极限的１．８ｐｓ超短脉冲激光     

反馈时延下LTE链路自适应算法性能研究

介绍了一种LTE系统的快速链路自适应算法,算法基于瞬时信道信息计算预编码矩阵指示、秩指示和信道质量指示3种反馈信息。当前对快速链路自适应算法的研究大部分都假设无反馈时延,因此研究了反馈时延对算法性能的影响,针对发射分集和闭环空间复用两种传输模式在低速和较高速场景下进行了算法性能评估。     

Highly Crystalline Soluble Acene Crystal Arrays for Organic Transistors: Mechanism of Crystal Growth During Dip‐Coating

The preparation of uniform large‐area highly crystalline organic semiconductor thin films that show outstanding carrier mobilities remains a challenge in the field of organic electronics, including organic field‐effect transistors. Quantitative control over the drying speed during dip‐coating permits optimization of the organic semiconductor film formation, although the kinetics of crystallization at the air–solution–substrate contact line are still not well understood. Here, we report the facile one‐step growth of self‐aligning, highly crystalline soluble acene crystal arrays that exhibit excellent field‐effect mobilities (up to 1.5 cm V^?1 s^?1) via an optimized dip‐coating process. We discover that optimized acene crystals grew at a particular substrate lifting‐rate in the presence of low boiling point solvents, such as dichloromethane (b.p. of 40.0 °C) or chloroform (b.p. of 60.4 °C). Variable‐temperature dip‐coating experiments using various solvents and lift rates are performed to elucidate the crystallization behavior. This bottom‐up study of soluble acene crystal growth during dip‐coating provides conditions under which one may obtain uniform organic semiconductor crystal arrays with high crystallinity and mobilities over large substrate areas, regardless of the substrate geometry (wafer substrates or cylinder‐shaped substrates).     

含有克尔自聚焦介质三元腔的自锁模激光器谐振腔的精确计算

设计了一种处理具有像散的克尔透镜锁模腔的精确理论计算方法 ,并用该方法对三元腔固体自锁模激光器的像散、稳定性、光束参数、自聚焦效应和克尔自聚焦强度与腔参数的关系进行了系统的理论计算。该计算为自锁模固体激光器的设计和调整提供了理论依据。     

Self‐Powered Trajectory,Velocity, and Acceleration Tracking of a Moving Object/Body using a Triboelectric Sensor

Motion tracking is of great importance in a wide range of fields such as automation, robotics, security, sports and entertainment. Here, a self‐powered, single‐electrode‐based triboelectric sensor (TES) is reported to accurately detect the movement of a moving object/body in two dimensions. Based on the coupling of triboelectric effect and electrostatic induction, the movement of an object on the top surface of a polytetrafluoroethylene (PTFE) layer induces changes in the electrical potential of the patterned aluminum electrodes underneath. From the measurements of the output performance (open‐circuit voltage and short‐circuit current), the motion information about the object, such as trajectory, velocity, and acceleration is derived in conformity with the preset values. Moreover, the TES can detect motions of more than one objects moving at the same time. In addition, applications of the TES are demonstrated by using LED illuminations as real‐time indicators to visualize the movement of a sliding object and the walking steps of a person.     

Autonomously Self‐Reporting Hard Coatings: Tracking the Temporal Oxidation Behavior of TiN by In Situ Sheet Resistance Measurements

Monitoring the structural health and integrity of coated components is of vital importance to increase their lifetime and the overall sustainability of the targeted applications. Here, the temporal oxidation behavior of TiN thin films is tracked using in situ sheet resistance measurements. Based on correlative film morphology, structure, and local composition data, it is evident that observed resistance changes are caused by oxidation of TiN. Thickness measurements of the remaining TiN under the oxide layer are in very good agreement with thicknesses deduced from in situ sheet resistance measurements. Hence, the in situ measured sheet resistance is an autonomous self‐reporting property useful for tracking the temporal oxidation behavior of TiN coatings.     

受限视觉下RoboCup3D中机器人的定位

针对RoboCup3D中机器人视觉模型的重大改变,即由原来的完美视觉模型变为受限视觉模型,在综合完美视觉下机器人的定位方法,即陀螺仪定位、1个标志杆定位,3个标志杆定位,提出一种受限视觉下机器人自身定位策略,并应用卡尔曼滤波器来提高定位的精度,在Rcssserver3D仿真环境中进行了定位数据的采样和对比,实验表明此定位方法具有很好的竞赛适应性与健壮性。