溜井振动放矿机的设计和使用维护

介绍了溜井振动放矿机设计时的埋设参数选择，阐述了其设计和安装的基本原则和要求，简明而系统地论述了振动放矿机使用维护的注意事项以及常见故障的处理方法。     

小官庄铁矿主井计量装置改造

自制的计量装置投入使用后安全高效。介绍了其工作原理及其特点。并同以前的计量装置进行了比较。新装置不仅经济效益好，且社会效益显著，保障了矿山的正常生产。     

缩短机械加工中零件等待时间的方法讨论

在机械制造系统中，零件在各工序间加工及流转，一般情况下许多工序难免存在零件等待加工的现象。为了提高系统的加工性能，本文利用现代仿真技术及排队论，通过优化工件在各相关工序的加工时间，从而消除工序中存在的工件等待加工现象。文章提出的方法还可用来预测机械制造系统的运行性能、比较各种可供选择的方案以及实现制造系统决策的优化。     

筒形件强力旋压新技术--浮动芯模法

提出了一种新的旋压方法－浮动芯模法。该方法采用的芯模长度尺寸较小,两端不固定加工,制造和安装非常容易。由于该方法是采用旋轮不动,工件做轴向运动,故解决了正旋所带来的工件扭曲的问题。此法用于加工长管类件,更显示出它的优越性,对改善管类件的加工具有重要的意义。     

Accu—Roll轧管机组主减速机输出轴联轴器大过盈量装配

介绍了采用油温加热装配工艺,实现Accu-Roll轧管机组主减速机输出轴联轴器大过盈量装配。     

搅拌设备设计的几点体会

从搅拌轴的支承条件、轴承间最佳距离的确定以及搅拌轴的稳定器等几个方面讨论 ,分析了其对搅拌设备设计的影响 ,并提出了相应的措施和方法。     

Program Design of Graphic Realism Displaying System Based on DXF Lathe Turning Rotational Parts

For virtually realizing the graphic realism display of DXF machine parts, in AutoCAD2007 graphic drawing environment, an interactive experimental method was taken to realize the display of graphic in DXF, which was taken as the data-exchanged interface and source. Based on depth analysis of DXF data structure, take one drawing of DXF lathe turning rotational part asthe test piece. By VC＋＋6.0 programming, part＇s geometry information could be obtained. Through data processing, 3D data of the test piece could be generated, which is based on 2D data of DXF test piece. Then, OpenGL graphic processing technologies （light, material, texture, map, et al.） were applied on the 3D display of test piece from DXF files or program modules. Finally based on the test report, results of the system functions were shared to prove the realization of system design, and the feasibility of algorithms used. In the developed software, Machine Designers could get a full view of machine parts, and do some proper modifications. The study content and results of our work have some theory and practical significance on the application of program design in the practical projects.     

Three Dimensional Modeling of Shaft with Process Structures on CATIA

Three dimensional models of shaft were completed on CATIA Part Design module with the Chinese national standard （GB） process structures such as chamfers, threads and tool withdrawal grooves, center holes, flat/woodruff/gib head taper keyseats, grinding undercuts, straight-sidedsplines, circlip slots and collars. The modeling steps are arranged in dialog menu interface by VB 6.0, the shaft creator, that permits users input geometric feature based parameters explicitly, and the standardized processdata are reorganized in Excel files that can be invoked correspondingly in the modeling procedure. It is aimed that this process may supply a simple way for shaft rapid modeling and comprehensive discipline for engineering students in their professional design activities.     

副井提升系统安全回路及上位机优化改造

针对煤矿副井提升系统安全回路软硬件及上位机中存在的不足进行了优化改造,改进了过卷试验方式,将闸系统紧停信号引入安全回路,并将安全回路各节点状态信号引入RSView32人机界面,实时显示安全回路状态;根据现场检修需要,在上位机增加了复位显示功能及行程偏差大报警信号。实际应用表明,该优化改造可迅速定位故障节点,实现软硬件互查。     

面向动用计划的车辆装备备件预测研究

针对动用计划下的车辆装备备件的消耗特点,研究了车辆装备维修备件消耗量和库存控制两个预测优化问题。考虑动用计划期内车辆装备的预防性维修和修复性维修,实现定时定程维修和自然随机故障维修下装备维修备件的消耗量的预测。在此基础上,根据备件库存检查方式的特点,建立基于定期检查策略的联合补货库存控制模型,根据模型的结构特点确定决策变量界限,并利用多类种群位置更新方式改进了果蝇优化算法。仿真结果表明,改进的果蝇优化算法具有良好的求解效率,本文所提出的优化方法可为车辆维修保障资源优化提供决策依据。