聚腈分子的飞秒时间分辨光克尔效应

本文利用飞秒时间分辩光克尔效应，对主链为Ｃ＝Ｎ结构的两种共轭聚腈高分子的溶液和薄膜进行研究，所测得的时间分辨光克尔信号均表现为超快响应。     

城市中心区游憩功能的开发——以武汉市为例

从我国游憩空间建设实践中 ,概括出对城市游憩功能认识过程的四个阶段 .进而 ,从城市中心商业区、历史街区和城市滨水区三个方面讨论了城市中心区的游憩功能开发问题 .最后 ,以武汉市为例进行了分析     

Al(OH)3对硅橡胶性能的影响

综述了Al（OH)3粒径和用量对硅椽胶漏电电流、脉冲电流、耐漏电起痕、表面粗糙程度、电蚀损、介电性能、拉伸强度及漏电电流实验重复性的影响。     

Growth rate and surface microstructure in α(6H)–SiC thin films grown by chemical vapor deposition

Monocrystalline 6H-SiC thin films have been epitaxially grown on off-axis 6H-SiC {0001} substrates in the temperature range of 1623–1873 K via chemical vapor deposition. The growth rate was a strong function of the growth temperature and the reactant gas concentration. The activation energies for growth were 64 kJ/mole and 55 kJ/mole for the (0001) Si face and the (0001) C face, respectively. The concentration of growth pits in the films increased as a function of decreasing deposition temperature, increasing concentration of reactant gases and increasing off-axis orientation. Beta-SiC islands were also observed in the epilayers when the (SiH₄ + C₂H₄)/H₂ ratio was ≥2.5:3000.     

Stereological estimation of the total volume of MR visible brain lesions in patients with multiple sclerosis

Point counting represents a convenient and efficient technique for estimating the area of transects through multiple sclerosis (MS) lesions on magnetic resonance (MR) images obtained for sections through the brain. When sectioning has been performed according to the Cavalieri method, unbiased estimates of the total volume of MR-visible MS plaques can be obtained with a precision of 3–5% in 5–10 min.     

Cure reaction for modified diallylbisphenol A/diaminodiphenylsulfone/bismaleimide

The glass‐transition temperature as a function of curing conversion for a modified diallylbisphenol A/diaminodiphenylsulfone/bismaleimide (BMI) resin was investigated at different temperature regimes and modeled using a modified Di Benedetto equation. Although the relationship between the glass‐transition temperature and conversion of the BMI system conforms to the Di Benedetto equation for α < 0.6 and at lower cure temperatures, at higher cure temperatures the results deviated significantly from the equation; thus, it was an inadequate model for the system. Fourier transform IR analysis showed that the major crosslinking reactions did not occur during cure for the modified BMI at and below 150°C. However, as the cure temperature was increased, the crosslinking reactions responsible for 3‐dimensional network structures became more dominant. At 190°C the C? N? C_stretch vibration of the uncured maleimide ring converted into succinimide rings in the curing process. Simultaneously, a decrease was observed for the absorbance bands of ? C? H_bending (maleimide). The higher cure temperatures induced a significantly faster initial crosslinking rate and also resulted in a shorter period of time after which further crosslinking was retarded, because the increase in the crosslinks also physically slowed further crosslinking activity. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 227–235, 2002     

HPVC／PP共混改性研究：Ⅲ低分子量反应性化合物作相容剂

采用低分子量反应性化合物作相容剂，即化学交联体系来改善ＨＰＶＣ／ＰＰ共混物的相容性。考察了在不同共混比下，不同化学交联体系对共混物力学性能的影响，并观察了共混物的微观形态。结果表明，采用低分子量反应性化合物作相容剂，共混物的拉伸强度提高，但冲击强度无改善。分散相尺寸减小，相间粘接得到改善。并比较了３种增容方法的效果，发现ＣＰＥ是ＨＰＶＣ／ＰＰ共混物的最佳相容剂。     

Microstructural Effects of Ion Implantation on Molybdenum

The effects of ion implantation and subsequent annealing on the microstructure of molybdenum have been investigated by transmission electron microscopy. The ions investigated were carbon, nitrogen, and tellurium. The ion-induced damage was found to give rise to grain boundary migration phenomena both during implantation and during subsequent annealing. Precipitation or ordering was found to occur for each ion on annealing.     

锦45块“八五”期间新增可采储量技术途径研究

方法 利用注采特征曲线，对锦４５块“八五”期间新增可采储量进行了计算研究，目的 研究蒸汽吞吐阶段增加可采储量的途径，为同类油藏的合理开发提供依据，结果 蒸汽吞吐阶段增加可采储量的三项技术途径；一是加大滚动勘探开发力度，不断发现和投入新储量；二是开展油藏工程研究，搞清油水分布，合理部署调整井，三是综合治理，增加可采储量。结论 “八五”期间，利用上述技术途径，改善了锦４５块开发效果，新增可采储量２７１     

聚苯硫醚酰胺的合成与表征

用4-氯苯甲酰4′-氯苯胺和硫化钠为原料在常压下合成了聚苯硫醚酰胺,并对其进行了表征。结果表明所合成的产物为结晶性聚合物,并且有较高的热稳定性。