Monte Carlo simulation of hydrogen absorption in palladium and palladium–silver alloys

A modified Monte Carlo (MC) simulation was performed to investigate the hydrogen absorption behavior in Pd and Pd–Ag alloys of the composition Pd_xAg_1−x (x=0.7–0.8) under H₂ pressure (0.1 MPa) at different temperatures. The present method employed can consider the dissociative adsorption of hydrogen molecule and the subsequent absorption of hydrogen atom by formalizing the relationship between the pressure of hydrogen molecule and hydrogen atom. The potential parameters were determined to reproduce the solution enthalpy of hydrogen in pure metals. The results are in good agreement with experimental findings as well as previous theoretical studies. We confirmed that our method is useful to simulate the absorption of hydrogen in metals and alloys.     

催化裂化干气回收乙烯用于制备环氧乙烷的研究

叙述了在YS型银催化剂作用下，利用催化裂化干气回收的乙烯制备环氧乙烷的实验研究。结果表明：在银催化剂上催化氧化生成环氧乙烷的过程中，使用回收的乙烯，催化剂的初选择性可达80％；在保持环氧乙烷时空产率不变，经过2000h催化剂稳定性试验后，选择性下降了3—4个百分点，反应温度上升约10℃，与用聚合级乙烯为原料进行比较，催化剂初选择性低2—3个百分点、稳定性略差。该结果为用回收乙烯生产环氧乙烷提供了试验依据。     

The bioconversion of tunisian phosphorite usingAspergillus niger

It is well known that the production of phosphoric fertilizers by traditional methods is connected with certain environmental problems, particularly related to use of acids during the decomposition of natural phosphates. A basic problem is also the fact that only 15 – 20% of the phosphorus contained in superphosphates is assimilated by plants.The development of methods to process natural phosphates without acid precipitation has potential advantages and in this respect biotechnological processing of natural phosphates in order to obtain organo-mineral fertilizers is very promising. The possibility of bioconverting the phosphorus of natural phosphates by usingAspergillus niger fungi through their deep incubation has been investigated. The investigations aim to achieve a high degree of P₂O₅ extraction from the phosphates with conversion from a non-utilizable to a utilizable form. The influence of the fungal strain, the kind of nutritive medium and the time of incubation of the process of biological mobilization of the phosphate rock is examined.It was established that the time of incubation, the kind of micro-organisms of theAspergillus niger group, as well as the kind of nutritive medium, influence significantly the process of bioconversion and the conversion of phosphorus from non-utilizable to water-soluble and utilizable for plants form. A maximum degree 90% of phosphorus extraction in the form of water-soluble and citrate-soluble has been reached for 10-day incubation. Physicochemical examinations have been carried out and they have proved that, as a result of the produced organic acids, a process of decomposition of the initial Tunisian phosphorite takes place.     

树脂悬浮光度法测定微量银

在ｐＨ６．９的缓冲溶液中，银与硫代米Ｃｈｉ酮（ＴＭＫ）形成的螯合物在树脂甘油相中悬浮富集，用光度法测定银在波长４６１ｎｍ处有最大吸收，银在０～６μｇ／１０ｍＬ范围内遵守比尔定律，可用于样品中微量银的测定。     

分析卤化银微晶的EDS方法探讨

本文探讨了用Ｘ射线能谱仪（ＥＤＳ）分析卤化银微晶的空间分辨率和吸收修正问题。对ＳＥＭ－ＥＤＳ和ＳＴＥＭ－ＥＤＳ两种不同分析模式的空间分辨率进行计算，表明ＳＴＥＭ－ＥＤＳ是研究单个卤化银微晶内碘的含量及分布的有效方法。并对定量分析数据和吸收修正参数进行了讨论，结果证明微晶不同区域厚度的差异，对碘含量的定量测定的影响可以忽略。     

CaF_2-CaO-MgO-Al_2O_3-SiO_2电渣渣系高温力学性能的研究

本文针对结晶器与铸锭作相对移动的电渣重熔过程中对渣系的高温强度及塑性的要求,对10种CaF_2-CaO-MgO-Al_2O_3-SiO_2渣组成进行了渣的高温强度及塑性的测定,建立了渣组成—渣的岩相结构—渣高温强度及塑性间的对应关系,并选择出较合适的成分范围为CaF_2 35～60％,CaO 10～25％,Al_2O_3 10～20％,SiO_25～15％,MgO≈5％。对其中一个成分的渣进行了电渣热穿孔熔铸中空锭生产实验,并取得了良好的表面质量。     

松香及其衍生物在浮选分离中的应用

介绍了松香的来源、化学组成及理化性质；讨论了松香及其衍生物在非硫化物矿浮选分离、有色金属离子的浮选分离以及从水溶液中浮选分离有机物等方面的应用情况。     

钙—铈氟碳酸盐矿物中BmSn型新多型的发现及其微结构研究

利用Philips CM-12分析型透射电镜对四川昌北大型稀土矿床中钙铈氟碳酸盐矿物进行了研究。除证实氟碳钙铈矿(BS)存在3R和6R2种多型外,首次发现和研究了氟碳钙铈矿(BS)存在4H、12H、18R、24R、30R和36R6种新多型;伦琴矿(BS_2)1种6R新多型和B_2S新规则混层矿物2H、12R和24R3种中新多型。电子衍射和晶格象分析表明:该类矿物中众多新多型的产生,主要是由于矿物结构单元层沿(?)轴有序堆垛和[CO_3]的定向周期性变化所致。     

低电阻率气层测井评价方法

粘土矿物成份是造成气层电阻率低的主要原因。用灰色静态模型计算孔隙度，用BP神经网络计算束缚水饱和度等参数。与岩心分析结果比较，储层参数计算结果精度有所提高。用储层参数建立气层和水层的判别式，判别结果与试油有较好的一致性。综合数字处理结果建立了气层产能评价模型，处理结果与试油结果比较，符合率82％。     

Silver Electrodeposition from Photographic Processing Solutions

This paper describes the parameters that are important in the industrial practice of silver removal from photographic fixers. The experiments were performed under potentiostatic control using synthetic solutions. The current efficiency was analysed as a function of the cathodic potential taking into account the deposit quality. A cathodic potential of ?0.5 V against a saturated calomel electrode is recommended. The conditions to prevent the darkening of the electrodeposit were investigated. The determination of silver concentration in the solution was made by direct potentiometry. The results obtained with synthetic fixers were corroborated by making the silver deposition from commercial fixers in an electrochemical reactor with rotating cylinder electrode intercalated in an electrolytic flow circuit in order to simulate practical conditions.