Adsorption des acides humiques sur charbon active en poudre. Influence du triphosphate de sodiumAdsorption of humic acids onto powdered activated carbon. The influence of sodium triphosphate

The use of activated carbon beds for the removal of natural humic and fulvic substances found in water supplies, has recently received considerable attention in water treatment operation (Lee et al., 1980; Le Cloirec et al., 1983). Moreover, the use of carbon adsorption for the reduction of haloform precursors (Anderson et al., 1981) and trihalomethanes produced by chlorination process, has contributed to a comprehensive investigation of adsorption characteristics of natural organic compounds (McCreary and Snoeyink, 1981). Many recent works showed the influence of adsorption system characteristics, such as pH, salt type, salt concentration and ionic heterogeneity in multicomponent adsorption systems, on the removal efficiency of humic and fulvic substances by activated carbon (McCreary and Snoeyink, 1980; Randtke and Jepsen, 1982; Weber et al., 1983). The purpose of this study is to examine the effect of a main component of domestic detergents, sodium triphosphate (STP), on the adsorptive capacities of powdered activated carbon (PAC) for commercially supplied humic acids, at different pH values in distilled water. Also, the effect of STP concentration and pH on the adsorption affinity of the PAC for humic acids, is discussed in relation with electrokinetic properties of carbon particles (zeta potential measurements).A first batch equilibrium study (Figs 1 and 2), showed an effective enhancement of adsorption capacity for humic acids as a function of STP concentration, in a non buffered media (pH of distilled water, close to 5.0). For example, visible absorption analysis of humic acids indicates an increase of 93% (500 mg l^?1 PAC) and 133% (1000 mg l^?1 PAC) in the carbon adsorption efficiency for a STP concentration from 0.2 to 1.0mM. A second batch equilibrium study (Figs 3 and 4) led to adsorption isotherms for humic acids in distilled water, as a function of STP concentration and initial pH value of the non buffered multicomponent system. Freundlich isotherms showed an increase in the adsorption capacity of the PAC for humic acids, with a decrease in pH and an increase in STP concentration. However, the adsorption capacity for humic acids is quite reduced at high pH values in presence of STP, in comparison with results obtained with distilled water.Electrokinetic measurements on PAC suspensions (Fig. 5) indicates that both humic acids and STP induce a negative variation of the zeta potential of carbon particles. In such a binary system, the zeta potential is a linear function of the pH; the negative surface charge of the carbon increasing with an elevation of pH (Fig. 6). Therefore, it appears that some adsorption of triphosphate polyanion from solution could occur, contributing then to the apparent negative surface charge of PAC particles.It has been previously showed that the type of anion in sodium salts, had little effect on the enhancement of adsorptive capacities of activated carbon for humic substances (Lafrance and Mazet, 1985), due to Na⁺ ions. However, adsorption of TP anions on the carbon surface may produce a source of repulsive charges, unfavourable to the co-adsorption of humic acids as the pH of the binary system reach more basic conditions. The influence of possible electrostatic interactions between adsorbates at the carbon surface, on the adsorption efficiency for humic acids, could then be studied by zeta potential measurements of PAC particles during the adsorption process.     

微量Si在W—7Ni—3Fe重合金中的行为

研究了掺到原料Ｗ粉中微量Ｓｉ（４００ｐｐｍ）在Ｗ－７Ｎｉ－３Ｆｅ重合金中的分布及在液相烧结过程中的行为。结果表明，Ｓｉ主要以固溶形式分布在Ｗ晶粒中。Ｘ射线光电子能谱（ＸＰＳ）分析发现，在掺杂Ｓｉ的Ｗ－Ｗ及Ｗ－基体相界面富集ＳｉＯ２和Ｎａ２ＳｉＯ３在未掺杂试样的断口表面发现了较弱的ＷＯ２的ＸＰＳ谱，而在掺杂合金中未发现ＷＯ２。     

Effects of SO2 and SO3 on the Na2SO4 induced corrosion of nickel

The effects of SO₂ and SO₃ in the environment on the hot corrosion behavior of Ni in the temperature range 750–950°C has been studied. Below the melting point of Na₂SO₄ (884°C), rapid corrosion takes place by formation of a Na₂SO₄-NiSO₄ melt, which can penetrate the porous oxide scale and give rise to sulfide information by coming in contact with the metal. The distribution of the sulfides depends on the SO₂ level in the ambient gas. Continued corrosion occurs by a sulfidation-oxidation mechanism. At temperatures above the melting point of Na₂SO₄, accelerated degradation occurs via dissolution of the surface scale, followed by reprecipitation of the oxide in a nonprotective form.Deceased     

大气电场倒转与突发钠层及突发E层的相关性

突发钠层(Sporadic Sodium Layer, Na_S)是中高层大气金属层最为显著的一种现象,其发生机制目前尚无定论。突发E层(Sporadic E layer, E_S)是等离子体密度异常增大的薄层,被认为与Na_S密切相关。为进一步研究Na_S及E_S事件之间相关性及影响因素,利用中国科学院“子午工程”2010～2018年合肥科大站宽带钠荧光共振激光雷达观测结果,并结合武汉左岭镇站数字测高仪及九峰站大气电场仪数据,分析大气电场倒转(即北向电场)对Na_S以及E_S事件的影响。在统计的91例Na_S事件中,发生于大气电场倒转时的比例为20/91; 同时,在发生Na_S事件的事例中,E_S消失或中断的比例较大(14/20),表明E_S可能以提供钠源的形式转化为Na_S。此外,在分析武汉左岭镇站数字测高仪数据的同时进行概率统计,结果表明:当大气电场倒转时,E_S临界频率减小甚至消失的概率较大(187/242),少数情况下可能造成临界频率增大甚至激发E_S生成(55/242); E_S虚高消失比例为179/242,E_S不变比例为27/242,E_S上升比例为23/242。综上所述,大气北向电场在一定程度上对E_S事件的发生有抑制作用,并对E_S事件的发生高度有明显影响。最后,对一种与电场倒转相关的突发钠层机制也进行了讨论。     

液相化学还原法制备不同形貌的多晶纳米镍

采用液相化学还原法,在1,2-丙二醇体系中,分别使用吐温-80（Tween-80）、聚乙二醇-6000（PEG-6000）和十二烷基硫酸钠（SDS）与聚乙二醇-6000（PEG-6000）的混合物作为修饰剂,利用1,2-丙二醇还原相同母体醋酸镍,制备形貌分别为海绵体、纤维状、雪花状的多晶纳米镍;在水体系中,使用SDS为修饰剂,利用水合肼还原相同母体醋酸镍,制备球形多晶纳米镍。通过X射线衍射（XRD）、透射电子显微镜（TEM）、选区电子衍射（SAED）对纳米镍进行表征。利用傅立叶红外（FTIR）分析初步解释不同形貌纳米镍的形成机理。     

铸造用CO2硬化冷芯盒材料及工艺的发展

铸造用CO2硬化粘结剂系统具有气硬冷芯盒的优点,同时又具有环保方面的优势。主要介绍了水玻璃-CO2法、聚丙烯酸钠-CO2法、酚醛树脂-CO2法三种工艺。这些工艺方法近年来国内外研究较多,并且取得了很大进展。     

N,N−二甲基−二硫代甲酰胺丙磺酸钠对THPED体系化学镀铜的影响

研究了N,N?二甲基?二硫代甲酰胺丙磺酸钠(DPS)作为添加剂对以四羟丙基乙二胺(THPED)为单一配位剂的化学镀铜体系的沉积速率、镀层形貌和晶体结构的影响。结果发现,当DPS的质量浓度从0 mg/L增大到1.0 mg/L时,沉积速率从2.91μm/h提高到6.73μm/h,所得镀层结晶均匀、细致。线性扫描伏安测量结果表明,DPS是通过促进甲醛的阳极氧化来加速化学镀过程。本体系的Cu镀层主要呈面心立方多晶取向,DPS的添加会令晶面取向从(220)转变为(111)。     

HEDP镀铜废水的组合处理方法

提出了一种HEDP镀铜废水的组合处理方法:用石灰乳液调节废水的pH至10~12后,加入氯化钙沉淀HEDP和酒石酸钾钠配位剂,从配合物中释放出的铜离子生成氢氧化铜沉淀;然后加入二甲基二硫代氨基甲酸钠沉淀残留的配合物中的铜离子,所释放出的HEDP及酒石酸根进一步与钙离子生成沉淀物。该方法简单、成本低,出水能满足排放要求。     

Hydrogen Sulfide Metabolite,Sodium Thiosulfate: Clinical Applications and Underlying Molecular Mechanisms

Thiosulfate in the form of sodium thiosulfate (STS) is a major oxidation product of hydrogen sulfide (H₂S), an endogenous signaling molecule and the third member of the gasotransmitter family. STS is currently used in the clinical treatment of acute cyanide poisoning, cisplatin toxicities in cancer therapy, and calciphylaxis in dialysis patients. Burgeoning evidence show that STS has antioxidant and anti-inflammatory properties, making it a potential therapeutic candidate molecule that can target multiple molecular pathways in various diseases and drug-induced toxicities. This review discusses the biochemical and molecular pathways in the generation of STS from H₂S, its clinical usefulness, and potential clinical applications, as well as the molecular mechanisms underlying these clinical applications and a future perspective in kidney transplantation.     

新能源汽车电池负极材料的制备与性能研究

采用原位合成法制备了镍-氧化镍/多孔碳纳米片（Ni-NiO/PCNs）负极材料,对比分析了氯化钠模板、退火温度和退火时间对负极材料物相组成、显微形貌和电化学性能的影响。结果表明,Ni/PCNs、Ni-NiO/C和Ni-NiO/PCNs负极材料都主要含有镍和无定型C相,且后2种负极材料还含有氧化镍相;300 ℃/4 h为Ni-NiO/PCNs负极材料适宜的退火工艺,此时Ni-NiO/PCNs负极材料中Ni-NiO粒子分散性较好且保持着三维片层结构,平均尺寸约为27 nm,Ni-NiO实现了对无定型C的包裹;退火时间过长（6 h）会使得镍粒子过氧化且发生团聚,而温度过高（400 ℃）会使得粒子以团聚为主,三维片层状结构消失。电流密度为1 A/g、循环5 000圈后Ni-NiO/PCNs负极材料的放电比容量为235 mA·h/g,此时的放电比容量约为首圈放电比容量的83.93%;Ni-NiO/C和Ni/PCNs负极材料在充放电循环过程中以及循环5 000圈后的放电比容量和容量保持率都明显低于Ni-NiO/PCNs负极材料,Ni-NiO/PCNs负极材料具有更好的循环稳定性,这主要与其具有独特的多孔三维片层结构有关。