非晶软磁合金的巨磁阻抗效应及应用

近来在ＦｅＣｏＳｉＢ等Ｃｏ基非晶体丝带中现了巨磁阻抗效应，由于在一小的直流纵向偏置场下该效应能使丝带两端的交流电压发生大而灵敏的变化，因而在磁记录头和传顺技术中具有巨大的应用科学潜能，受到各国学者的关注，本文简单介绍了巨磁阻抗效应的来源，并综述了近年来非晶体软磁合金材料的的巨磁阻抗效应及应用的研究进展，文章最后说明了尚待深入解决的问题。     

软土中的基坑支护工程实例分析

武汉某地下车库基坑处于深厚淤泥中 ,采用排桩 +土层锚杆支护与放坡 +网喷分段支护方式 ,本文根据现场地质、地形条件 ,对本工程支护过程中支护桩与土体变形作了具体分析。     

滩海油罐CAD/CAG

根据滩海油田地区环境条件的特殊性,认为取50年一遇的3秒钟瞬时风速作为计算依据更切合实际,给出了相应的抗风设计方法和设计公式,根据最新储油罐抗震理论编制了验算程序.将计算机辅助设计与辅助绘图集成一体,形成了一套完整的储油罐CAD/CAG系统.该系统省去了过去人工计算需要查取数据的麻烦,可以自动检索,并完成各项分析计算和全套施工图的绘制工作.速度快、准确性高,直接输出透明图,整洁规范.该系统正用于实际设计生产.     

Contact with out-group friends as a predictor of meta-attitudinal strength and accessibility of attitudes toward gay men.

Two studies examined the effects of cross-group friendships on heterosexuals' attitudes toward gay men. In Study 1, the authors tested the effects of cross-group friendships with gay men on out-group attitudes, meta-attitudinal strength, and attitude accessibility. The authors simultaneously explored mediational effects of intergroup anxiety. Path analysis showed that cross-group friendships were associated with meta-attitudinally stronger and more accessible out-group attitudes, and the effects on all 3 criterion variables were mediated by intergroup anxiety. In Study 2, the authors sought to replicate the basic results of Study 1, while additionally exploring mediational effects of closeness of cross-group friendship and moderational effects of perceived group typicality. Structural equation modeling showed that cross-group friendships were associated with meta-attitudinally stronger and more accessible out-group attitudes; friendships had indirect effects on all 3 criterion variables, via closeness of friendship and intergroup anxiety. Closeness of friendship only predicted lower intergroup anxiety, however, when the out-group friend was perceived as highly typical. The authors emphasize the importance of considering the nature of out-group attitudes more completely when evaluating the effectiveness of intergroup contact in reducing prejudice. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Machining with tool–chip contact on the tool secondary rake face—Part II: analysis and discussion

The forces, chip thickness, and natural tool–chip contact length in machining with a double-rake-angled tool are predicted in Part II of the present study. It is revealed that in comparison with a single-rake-angled tool, a double-rake-angled tool increases the forces, especially the thrust force. However, the increase in chip thickness and tool–chip contact length is not significant under the input conditions specified in the present study. The effect of seven input variables of the proposed model is quantitatively investigated. The predicted variations of forces, chip thickness, and natural tool–chip contact length are in good agreement with theoretical and experimental results obtained by other researchers. The interrelationships among the resultant force, the chip thickness, and the natural tool–chip contact length are established, which provides a new and promising method to estimate the tool–chip contact length by employing the resultant force. It is demonstrated that the model can also be extended to study the problem of machining with a groove-type chip breaker tool.     

高架桥中异形板裂缝的分析与加固

从分析某高架桥中异形板板底裂缝的特点及成因着手 ,对设计与施工工艺诸方面提出防止裂缝的对策和对裂缝进行加固的全过程。     

Rolling contact fatigue behavior of sintered and hardened steels

Powder-metal-processed bearings and gears are finding increasing application because of their economical and technical advantages. The residual pores from the sintering operatives act as lubricant pockets and dampen sound and vibration. However, porosity also decreases the mechanical strength and reduces the life of components fabricated by powder processing relative to similar wrought components. The rolling contact fatigue behavior of sintered and heat treated steel rollers was investigated using a fatigue test machine designed and fabricated for that purpose. The powder-metal-processed and the wrought steel rollers that were tested had similar composition and hardness and were mated against wrought steel rollers of high hardness. The contact stress versus number of cycles to failure data showed that the wrought steel had a very high endurance limit under rolling contact fatigue compared to the sintered steels investigated. Rolling contact fatigue behavior was found to depend on the porosity present in the material. Large surface peeling failures and pitting type fatigue failures were observed in the sintered and hardened steels, while only pitting type failures were observed in the wrought steels     

沪芦高速公路软土地基设计与研究

软土地基的处理是影响高等级公路工程质量和使用性能的重要因素 ,针对沪芦高速公路的工程特点 ,通过对不同土层力学性能分析 ,地基稳定验算以及沉降计算提出地基处理方案 ,并介绍通过地基处理后获得的显著效果     

Electroclinic measurement of the coefficients of Landau expansion of some ferroelectric liquid crystals

The electroclinic effect in the smectic A phase of ferroelectric liquid crystals is a sensitive probe for measuring the soft mode response near the A-C* transition point. It is possible to evaluate several coefficients of the Landau theory describing the A-C* transition by simultaneously measuring the frequency dependence of both the optical signal and the current through the sample. We have made such measurements on a couple of homologous series [2S,3S]-4′-(2-chloro-3-methyl pentanoyloxy) phenyl-trans-4″-n alkoxy cinnamates synthesized in our labortory. The results show that the Landau meanfield theory is adequate to describe the A-C* phase transition in these compounds. Presented at the 15th International Liquid Crystal Conference, Budapest, 3–8 July 1994.     

T8钢—聚有机硅氧烷仿生减粘降阻复合涂层的特性

研究了Ｔ８钢－聚有机硅氧烷仿生减粘降阻复合涂层的表面润湿性，磨料磨损性及土壤的减粘降组性能，与金属材料相比，仿生复合涂层的表面憎水性显著提高，水在其表面上的接触角达９２°；与４５钢相比，其磨料磨损的体积相对耐磨系数为６３％，降阻率达１５．２２％－－２２．２７％。