Electrochemical noise analysis for estimation of corrosion rate of carbon steel in bicarbonate solution

We have investigated the electrochemical noise behavior of carbon steel in fully deaerated aqueous bicarbonate solutions, and discussed the optimum conditions of the noise analysis for estimating corrosion rate of the steel. Noise of the potential difference and of the short-circuit current between two identical steel coupons were successfully measured. The time-series noise patterns were transformed into frequency domain by fast Fourier transformation, and then their power spectrum densities (PSDs) at a frequency were determined to be compared with the corrosion rate. The PSDs of the potential and of the current varied with changing environmental factors of bicarbonate concentration, pH, and immersion time. The factors also controlled the corrosion rate of the steel. The PSDs were associated with the corrosion rate, and then it was found that the PSDs of the potential and of the current showed linear correlation with the corrosion rate in log-log scale. There was also linear relationship between the corrosion rate and a spectral noise resistance obtained from the PSDs of the potential and the current. The linearities of the three correlations were better at a lower analyzed frequency. Furthermore, the PSDs of the current and the noise resistance indicated more linear correlation with the corrosion rate than that of the potential. As the simplicity of the measurement system is additionally considered, it is concluded that the PSD of the current noise at an analyzed frequency of 3 mHz is the optimum conditions for estimating the corrosion rate from 10⁻² to 10⁰ A m⁻² in this study.     

佛尔哈德法测定氯化除汞上清液中的氯量

控制pH4-6，用锌粉还原氯化除汞上清液中的汞（Ⅱ）离子，取置换后液加入过量的硝酸银标准溶液，以硫酸铁铵溶液作指示剂，用硫氰酸钾标准滴定溶液滴定来测定氯量。该方法的检出限：0．25mg／100mL，回收率：98％-101％。     

带化学反应的膛口温度场方程分歧解

提出膛口系统是一种准耗散结构，并分析了符合耗散结构的条件，在分析分歧解线性稳定性的基础上，使用高维定态投影解定态分歧解，分歧解与实验结果吻合较好。     

Effect of chloride ions on immersion plating of copper onto porous silicon from a methanol solution

The effect of chloride ions (Cl⁻) during the immersion plating of copper onto porous silicon (PS) from a methanol (MeOH) solution has been studied. The presence of Cl⁻ in the Cu²⁺ solution was found to slow down the rate of copper deposition, as confirmed by inductively coupled argon plasma emission spectroscopy and X-ray photoelectron spectroscopy measurements. The threshold concentration of Cl⁻ at which the deposition of copper is very severely diminished was found to be 0.1 M. The inhibition effect is discussed on the basis of the rest potential values of PS and polarization curve measurements. They revealed that the rest potential of PS upon dipping in these solutions appears to direct the metal deposition. Current density-potential curves show that at Cl⁻ concentrations higher than 0.1 M, the reduction of Cu ions proceeds in two steps; the reduction of Cu(II) to Cu(I) followed by the reduction of Cu(I) to Cu(0). This suggests that Cu(I) species in MeOH solution can be stable over a certain potential range and this stability of Cu(I) is responsible for the inhibition of metal deposition. Fourier transform infrared spectroscopy and scanning electron microscopy (SEM) were also performed to investigate the structural changes and characterizations of PS samples after the plating process.     

Boundary Constrained Swept Surfaces for Modelling and Animation

Due to their simplicity and intuitiveness, swept surfaces are widely used in many surface modelling applications. In this paper, we present a versatile swept surface technique called the boundary constrained swept surfaces. The most distinct feature is its ability to satisfy boundary constraints, including the shape and tangent conditions at the boundaries of a swept surface. This permits significantly varying surfaces to be both modelled and smoothly assembled, leading to the construction of complex objects. The representation, similar to an ordinary swept surface, is analytical in nature and thus it is light in storage cost and numerically very stable to compute. We also introduce a number of useful shape manipulation tools, such as sculpting forces, to deform a surface both locally and globally. In addition to being a complementary method to the mainstream surface modelling and deformation techniques, we have found it very effective in automatically rebuilding existing complex models. Model reconstruction is arguably one of the most laborious and expensive tasks in modelling complex animated characters. We demonstrate how our technique can be used to automate this process.     

从氯化铅渣中回收铅铋的研究

本文以柿竹园有色金属矿粗铋火法精炼、气化除铅产出的铅渣为原料，在常压下采用氯化钠水溶液进行浸出处理，有效地分离了铅和铋，并将铅制成了化工产品黄丹及硫酸铅     

Exact solution of elasto-plastic stresses in a metal-matrix composite beam of arbitrary orientation subjected to transverse loads

An analytical elasto-plastic stress analysis is presented for a metal-matrix composite beam of arbitrary orientation subjected to a single transverse force applied to the free end of the beam and a uniformly distributed load. The material is assumed to be perfectly plastic in the elasto-plastic solution. A composite consisting of stainless-steel-reinforced aluminum was produced for this work. Sample problems are given for various orientation angles. Elastic, elastoplastic and residual normal and shear stresses are calculated. The location of the elasto-plastic boundary of the beam is obtained according to the x coordinates of the beam.     

Testing the robustness of CIECAM02

CIE TC8‐01 has adopted a new color appearance model: CIECAM02¹ replaces the CIECAM97s.² The new model consists of a number of refinements and simplifications of the CIECAM97s color appearance model. This article describes further tests to the robustness of the forward and reverse modes. © 2005 Wiley Periodicals, Inc. Col Res Appl, 30, 99–106, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.20087     

JDZ-1型固态存储雨量器降水量误差成因分析

对JDZ-1型固态存储雨量器与虹吸自记雨量计平行观测资料进行了系统分析,分析了两者存在误差的影响因素。对JDZ-1型固态存储雨量器在北方地区使用过程中存在的问题提出了解决方法,以保证和提高JDZ-1型固态存储雨量器资料质量。     

用废聚苯乙烯塑料制备胶粘剂的综述

废聚苯乙烯泡沫塑料在自然界中不能自然降解而正成为严重的社会公害，其综合利用在当今社会越来越受到重视。本文着重分析了聚苯乙烯塑料在我国的消费状况并阐述了利用废旧泡沫塑料研制和开发各种不同用途胶粘剂的进展