熔融石英陶瓷的性能及其应用

介绍了石英陶瓷的性能特点、制备过程及应用领域     

Assessing the predictive capability of two‐phase models for the mechanical behavior of alumina/epoxy nanocomposites

A review of analytical modeling of particulate reinforcement is made as a prelude to the problem of microstructural inhomogeneity in nanocomposite materials. Noting the inevitability of dispersion nonuniformity, and variations in agglomerate morphology and filler‐matrix interaction, the need to question the application of such models to novel materials arises. Employing the mechanical properties of alumina/epoxy nanocomposites, with known dispersion characteristics, an evaluation of the predictive capability of various models for Young's modulus, strength, and failure strain is made. Comparison between models is accompanied by a discussion of the parameters used in the fitting of macroscopic behavior to microstructural features. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 869–879, 2005     

Composites based on eucalyptus tar pitch/castor oil polyurethane and short sisal fibers

Polymeric materials are being developed with renewable resources to promote industrial progress with environmentally friendly technologies. For this reason, polyurethane samples were prepared with 4,4′‐diphenylmethane diisocyanate (NCO/OH = 1), eucalyptus tar pitch (biopitch), castor oil as a polyol, and dibutyltin dilaurate as a catalyst. These materials were reinforced with different contents of short sisal fibers (0, 2.5, 5.0, 7.5, and 10.0%) and were prepared by resin‐transfer molding. The composites were characterized by IR absorption spectroscopy, thermal analysis (thermogravimetry and differential scanning calorimetry), impact resistance, scanning electron microscopy, and water absorption resistance. These materials showed hydrophobic characteristics, despite the addition of sisal fibers. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3797–3802, 2003     

浅析电力用户终端的管理现状及对策

当前,电力用户终端管理中出现的问题越来越多,已经影响到供电企业的发展和社会的和谐。如何解决这些问题并建立有效的电力终端管理机制,是目前电力企业面临的首要问题。     

复合泡沫塑料的性能改进研究

为改善复合泡沫塑料的介电性能,采用金属氧化物粒子填充改性双马来酰亚胺空芯玻璃微球复合泡沫塑料得到了高介电常数、低介质损耗因数、低密度、力学性能良好的电介质材料。     

级联No序列的三项式特性研究

利用有限域GF(2n)到其子域GF(2m)上的迹函数及其性质,研究一类非线性扩频序列的密码学性质,即级联No序列的三项式特性。给出级联No序列的三项生成多项式的形式,将级联No序列三项式特性的结论应用到二元No序列中,解决了二元No序列的三项式特性问题。分析结果表明,级联No序列不仅具有三项式对,而且具有正则三项式对。     

聚醚型聚氨酯的氢键、微相分离及性能

用本体一步法合成了5种不同硬段含量(11.0％～46.9％)的二苯甲烷-4,4′-二异氰酸酯/环氧乙烷封端型聚环氧丙烷聚醚/乙二醇的聚醚型聚氨酯,并借助于IR,DSC,DMS和材料试验机等手段对该聚氨酯的氢键、微相分离及力学性能进行了表征。结果表明:随着硬段含量的增加,其>NH与微区中的>C=O的氢键化程度逐渐提高,软段微区中—O—的氢键化程度逐渐降低;微相分离程度逐渐提高;拉伸强度及硬度随之增加,扯断伸长率在硬段含量40％左右出现极大值。     

粉尘含碳球团还原方式及气氛对其还原挥发性能的影响

在1150℃和1250℃、0．1L／min和10L／min的气量下，对通人含不同CO2量的氮气影响粉尘含碳球团还原速度的实验研究表明：以滚动方式所造球团中，氧化物的还原完全以间接还原的方式进行，气氛中非还原气体流速（或流量）的增加对粉尘含碳球团氧化铁还原速度有显著的降低作用，但还原温度提高则对气量增加造成的氧化铁还原速度降低有显著的抵消作用．气氛对球团中锌的挥发速度影响很小，对铅的挥发速度几乎不产生影响．     

秋季太湖叶绿素a浓度荧光反演研究

基于2007年11~12月太湖全湖实测水质参数和光谱数据,首先利用高斯方程对遥感反射率进行过滤分解,找出叶绿素a(chl\|a)吸收峰675 nm以后的荧光反射峰(Fluorescence Peak:FP),再以662 nm处的反射率为基准,采用归一化荧光高度法进行叶绿素a浓度(C chl-a)反演,得到chl-a反演模型。基于高斯分解获取的chl-a的荧光反射峰值R(FP)与662 nm处的反射率R (662)比值［R(FP)/R(662)］与C chl-a之间存在显著的相关性,该模型为秋季太湖水体C chl-a的最佳反演模型。在高悬浮泥沙条件下,该模型能够较好地表示出叶绿素荧光高度与叶绿素浓度之间的关系,为C chl-a反演提供新的方法和依据,并为传感器敏感波段的选取和设置提供参考。