片状陶瓷材料高低温电性能参数的自动检测

由进口电性能仪配上自制的高温系统，计算机自动采集数据，配置成一套高低温电性参数测定装置，该装置的特点是，升温快，炉体小巧，炉芯可更换盛液氮装置，屏蔽良好，等温区长，温工及参数测量精确可靠。     

电子吊舱微环境智能控制系统

介绍了一种由高性能空气循环冷却系统和以微处理器为核心的智能测控系统组成的新型电子吊舱微环境控制系统，该系统制冷性能优良，节能效果好，数据采集，存储，实时处理，控制，报警功能完全硬件化，实现了对吊舱微环境温度，温度，压力的综合可靠控制，其设计思想和方法可推广应用于其它航空，航天和地面复杂环境的控制。     

用废旧橡胶生产精细胶粉的空气涡轮制冷低温粉碎法

利用先进的空气涡轮制冷系统，在低温条件下，将废旧橡胶进行冷冻，粉碎，制成60目以上细度的精细胶粉，此法简称ATCG法，它的冷冻能耗成本仅为国际上通用的液氮法的十分之一，整个工艺过程不产生二次污染，为精细胶粉的制取开辟了一条新途径。     

Introduction to geothermal exploration on ascension island, South Atlantic Ocean

The exploration for a geothermal resource on Ascension Island utilized a strategy that initially employed geologic mapping. On the basis of this, subsurface faults were mapped using an aeromagnetic survey. The faults were then explored using electrical resistivity surveys to define areas of potential hydrothermal fluid up-welling. The results of all of these techniques were used to site temperature gradient holes. A deep geothermal exploration well was then drilled in the area with highest heat flow adjacent to a rhyolite-to-trachyte volcanic complex.     

GH2027铁基高温合金的第二相研究

运用电子显微分析和波谱分析等方法对ＧＨ２０２７合金的第二相进行了研究，结果表明，合金晶界相主要是片状Ｍ６Ｃ和薄膜状Ｍ２３Ｃ６，经波纹图样测得其错配度约为３％，晶内Ｍ６Ｃ和Ｍ２３     

中温低氰液体碳氮共渗及其应用效果

通过金相、硬度、耐磨性等测试分析表明，在“６０３”液体渗碳基础上研制出的新型中温低氰液体碳氮共渗剂对薄片件进行薄层碳氮共渗．能完全满足技术要求，并且取得了良好经济和社会效益．     

水包油型多彩涂料的生产及施工

介绍了水包油型多彩涂料的组成、各组份的作用、生产工艺路线和工艺参数的选择。对多彩涂料的施工机具和方法作了简单介绍。     

Studies on the interactions of metal oxides and Na2 SO4 at 1100 and 1200 K in oxygen

The interaction of different metal oxides such as Co₃O₄, NiO, Al₂O₃, Cr₂O₃, Fe₂O₃ and SiO₂ with Na₂SO₄ at a temperature of 1100 and 1200 K in flowing oxygen has been studied. The thermogravimetric studies for each system were carried out as a function of Na₂SO₄ in the mixture. The presence of different constituents in the reaction products were identified by X-ray diffraction analysis and the morphologies of the reaction products were characterized using metallography and scanning electron microscopy (SEM). The formation of products was also investigated by thermodynamic computation of free energies of the reactions and the study of relevant equilibrium phase diagrams. The soluble species in the aqueous solutions of the reaction products were determined quantitatively using atomic absorption spectrophotometry. The high temperature interaction products usually contain a 3-phase structure namely, Na₂O·M₂O _x , M₂O _x and metal sulphide and/or metal sulphate. The formation of Na₂O·M₂O _x depends upon the solid state solubility of metal oxide in the molten salt at high temperatures. Under limited solubility conditions Na₂O·M₂O _x is invariably formed, but as soon as this condition is relaxed the oxide. M₂O _x , precipitates and forms a separate phase.     

热敏电缆在拉拔减径工艺过程中的性能变化

在拉拔减径工艺的初始阶段，装填于热敏电缆中的氧化物陶瓷热敏材料粉的体积将发生收缩，随后体积不再发生变化。对于不经过热处理的样品，理论分析和实验结果表明，体积收缩停止后，其每米电阻值不随尺寸变化而改变。由于安装等因素引起的芯线电极的位置偏差不公带来样品电阻较大的变化。对于经过热处理的样品，其电阻值在热处理前后及拉拔减径过程中都有较大的变化（可达几个数量级），变化规律较为紊乱。实验分析发现，热处理后的     

-50℃用20MnMoD钢锻件及其焊接接头性能

研究了-50℃的20MnMoD钢锻件及其焊接接头在不同热处理状态时的综合力学性能。结果表明,-50℃的20MnMoD钢锻件具有良好的低温韧性,可与-50℃级正火型低温压力容器钢15MnNiNbDR配套使用。