低温等离子体处理纤维素纤维的机理和性能研究

本文应用不同技术参数的低温等离子体对Lyocell纤维进行处理,借助SEM等手段对其表面特征和物理性能进行研究,通过化学热力学和化学动力学,对反应机理做了研究和分析,证明了通过这种新型手段对Lyocell纤维进行接枝和改性的可行性和优越性,并针对Lyocell纤维的一些相关性能进行了处理前和处理后的比较,结果表明低温等离子体处理后的Lyocell纤维在不降低物理机械性能的同时很大程度上减少了纤维的原纤化。     

工业过程的先进控制

在分析工业过程特点的基础上，总结了工业过程先进控制的发展现状，阐述了PID控制器参数整定和模型预测控制的基本概念和内容，讨论了工业过程先进控制的核心内容及其带来的可观的经济效益，并探讨了先进控制软件的产业化问题。     

广义线性模型与非线性模型参数的统计推断

概述了广义线性模型(含半参数广义线性模型)与非线性模型研究的新进展,着重讨论了它们参数估计的统计推断。近年来,广义线性模型与非线性模型的研究发展迅速,有着广泛的应用前景。     

改进的蚁群算法在溶质运移参数识别问题中的应用

非饱和土壤水分和溶质运移参数(扩散率、导水率和水动力弥散系数)取值范围较大,往往跨越几个数量级。采用传统离散化蚁群算法求解此类问题,所需节点较多,这会造成算法收敛时间较长。该文在传统蚁群算法基础上,对蚂蚁搜索路径进行改进,改进后的蚁群算法寻优路径由参数精度位数(整数位和小数位)、参数个数以及0–9十个数字构成,并将路径解码公式修改为具有判别参数正负功能的解码公式。采用改进的连续蚁群算法对非饱和溶质运移参数识别优化模型进行求解。数值模拟表明相同迭代次数下改进的蚁群算法比传统蚁群算法耗时少,算法计算时间与迭代次数满足线性关系,含水率和溶质浓度实测值与计算值吻合较好、相关性较高。     

新型呋咱(氧化呋咱)类炸药爆轰参数的理论计算

以3,4-二(氨基呋咱基)氧化呋咱(BAFF)为结构单元设计了一类新型呋咱(氧化呋咱)类炸药分子.运用预测炸药分解产物的BW法则、计算爆速的Rothsteine方法和计算C-J压力的库珀方法等对该类炸药的爆炸参数进行了理论计算,并与HMX等炸药的爆炸参数进行了比较.结果表明,该类炸药的密度大,爆速和爆压介于TATB和HMX之间,是一类新型高能量密度材料化合物.由于该类炸药分子中含呋咱环具有芳香性,预测其分子的稳定性良好.     

Electrochemical behaviour of indium ions in molten equimolar CaCl2–NaCl mixture at 550 ∘C

The stability of indium chloride and oxide as well as the electrochemical behaviour of indium ions have been studied in the equimolar CaCl2–NaCl melt at 550 C by X-ray diffraction (XRD) and different electrochemical techniques, using molybdenum and tungsten wires as working electrodes. Voltammetric and chronopotentiometric studies showed signals attributed to the presence of three oxidation states of indium, i.e. 0, i and iii. The standard potential of the redox couples, as well as the solubility products of indium oxides have been determined, showing that In(iii) ions are completely reduced to monovalent indium by the indium metal according to the reaction: In () + 2 In 3 In () and that In₂O is a strong oxide donor according to the reaction: In₂O(s) 2 In() + O^2- These results have allowed the construction of E-pO2– equilibrium diagrams summarising the properties of In–O compounds. The electrodeposition of indium was uncomplicated at Mo and W electrodes. Very good adherence of liquid indium to the electrode materials was observed, with the formation of Na–In alloys at highly reducing potentials, and there was no evidence of indium dissolution into the melt. Moreover, the voltammograms corresponding to the electrochemical In(iii)/In(i) exchange were well defined. The two electrochemical steps were found to be quasi-reversible, and the values of the kinetic parameters, ko and , for both reactions, as well as the diffusion coefficients, DIn(III) and DIn(I) were calculated.     

Time Dependence and Moments of a Family of Time-Varying Parameter Garch in Mean Models

Abstract.  In this paper we consider the time series dependence, stationarity, and higher moments issues of a family of first-order conditionally heteroskedastic in mean models with a possibly time-varying mean parameter. The interest in these models lies in the fact that economic theory and physics often require the connection between the first and second conditional moments of time series. Our results reveal important properties of these models, which are consistent with stylized facts in financial and turbulence data sets. They can also be employed for model identification, estimation, and testing.     

WALL AND PARTICLE-SHAPE EFFECTS ON HEAT TRANSFER IN PACKED BEDS

The effective radial thermal conductivity and apparent heat transfer coefficient for a packed bed were experimentally determined for beds of spheres, full cylinders and hollow cylinders, for flow rates giving particle Reynolds numbers in the range 100-1000, and for tube to particle diameter ratios of 5-12. Over these ranges the radial Peclet number Pe_r showed significant dependence on solid conductivity, gas flow rate and particle shape, while the wall Biot number Bi showed significant dependence on tube to particle diameter ratio, gas flow rate and particle shape. These dependencies were predicted well by equations incorporating the effects of these variables into individual gas and solid phase parameters, which were then combined to give the effective or lumped parameters