蒸发式空冷器的运行实践

通过了解蒸发式空冷器的工作原理和结构,在运行实践过程中,对组成设备出现的问题提出相应的解决方案,并对部分组成设备提出改进的建议,以方便检修和维护,并提出了在冬季长时间高炉休风情况下保证水温不下降过低的解决方案。     

残留奥氏体对1500MPa级新型低碳Mn-Si-Cr系合金钢冲击韧度的影响

15 0 0MPa级无碳化物贝氏体 马氏体复相钢的第一类回火脆性开始温度高于 36 0℃。实验表明 ,这并非由于贝氏体 马氏体复相韧化 ,而是与无碳化物贝氏体中的膜状残留奥氏体有关。无碳化物贝氏体中机械稳定性较高的残留奥氏体可能是导致无碳化物贝氏体 马氏体复相钢第一类回火脆性开始温度升高的直接原因。     

Cold Gelation of β-lactoglobulin in the Presence of Iron

ABSTRACT: To protect and transport iron, we investigated the trapping properties of a network formed from β-lactoglobulin. We studied the influence of different parameters—pH, iron, and protein concentrations—on gel properties (optical and mechanical properties, WHC, and microstructure). For all conditions tested, the results show the formation of a cold gel in the presence of iron. The mechanical properties reveal that the elastic behavior and the strength of rupture increase with higher protein concentrations and decrease with higher iron concentrations. The water-holding capacity is high for low iron concentrations. The microstructure shows that, at low iron/protein ratios, a homogeneous filamentous network is obtained whereas, at high iron/protein ratios, more random aggregated particles are present.     

Recovery retardation in equal channel angular pressed Al–Zr alloy during friction stir welding

The effect of Zr on reduction of hardness and microstructure in an FS weld of equal channel angular-pressed Al alloy was investigated. Zr addition to Al suppressed dynamic recovery in the thermomechanically affected zone and enabled retention of the high hardness of the ECA-pressed material throughout the weld.     

Al-Cu-Fe系初生准晶相凝固过程的电子显微分析

采用包括金相（OM），粉末X射线衍射（XRD），扫描电子显微镜（SEM）观察和透射电子显微（TEM）分析等方法，研究了铸态Al592.Cu36.8Fe3.0Si1.0合金（700℃保温2．5h后水淬）的显微组织及相组成。发现铸锭中存在4种相：准晶I相，τ3相（或φ相），θ－Al2Cu相和η－AlCu相，凝固过程可描述为：初生晶是准晶Ⅰ相；在保温过程中发生包晶或共晶反应（L＋i→τ3(或φ）或L→τ3（或φ）＋i)形成的τ3相（或φ相），呈微畴结构；而剩余液体水淬形成θ－Al2Cu相和η－AlCu 相。     

稀土锆莫来石耐火材料的显微结构研究

本文运用ＸＲＤ、ＳＥＭ等方法对稀土锆莫来石耐火材料的显微结构，物相变化，以及稀土的作用机制进行了研究。     

向量优化为基础的图像空间迭代重建理论及实现

本文研究了单准则及多准则迭代图像重建理论及计算机实现.结果表明了多准则迭代图像重建在重建图像质量方面优于流行的单准则迭代重建方法,显示了多准则法的优点.     

Non-contact methods of measuring moisture concentration in external layers of building partitions: III—Water vapour condensation on the cementitious surfaces

This paper presents the results of the larger study into a potential application of laser radiation for the detection of phase transition processes in low temperatures occurring on the surface layers of cementitious materials. An attempt was made to identify relationships between the environmental conditions—temperature and air humidity, and the selected parameters of the reflected light. Onset of the condensation process and formation of water microdrops on the surface of the material leads to the phase displacement of individual laser rays, which are represented by different speckle images.

Although the analysis of parameters of the reflected light are very difficult in the case of porous materials because of highly developed roughness of the surface structure it has been proved that a dynamic study of the phase transition phenomena can be successfully carried out without mechanical intervention.     

热流体喷射变形机理与喷嘴结构

高速短程纺技术能生产三维卷曲短纤维,该技术的关键之一是热流体喷射装置。本文介绍了热流体喷射装置的演变与特点及它的加工机理和某些已应用的实际装置。     

Recent developments of high-performance NEOMAX magnets

For further improvement in achieving extremely high magnetic properties of Nd- Fe- B sintered magnets, extensive investigation has been done to densify the magnet up to the theoretical value, to increase the volume fraction of the Nd ₂Fe₁₄B matrix phase, and to achieve a high degree of alignment. By controlling chemical composition and the amount of constituent phases,improving particle size distribution, and adopting the isostatic pressing method to get better alignment of fine particles, we have succeeded in obtaining a high-performance magnet having residual flux density (B_r) of 1.495 T (14.95 kG), maximum energy product [(BH)_max] of 431 kj/m³ (54.2 MGOe), and intrinsic coercivity (iH_c) of 845 kA/m (10.62 kOe).