“日盲”紫外信号目标模拟器光学系统设计

"日盲"紫外探测系统由于工作在日盲区,具有独特的探测优势,在民用和军事领域都得到了广泛的关注和应用。完成了"日盲"紫外信号目标模拟器光学系统的研究和优化设计。基于"日盲"紫外光谱特性,研究目标模拟器的设计的工作原理和设计方法,给出了"日盲"紫外信号目标模拟器的光学系统设计和像差评价。设计完成了一款焦距500mm、相对孔径1/10、波段0.24μm~0.28μm、视场角2°的"日盲"紫外信号目标模拟器系统。系统共采用了4片球面透镜,由两种紫外光学材料组成,光学系统总长540mm,光学传递函数在37lp/mm时大于0.7,畸变小于0.005%,具有成像质量好、结构简单紧凑的优点和很高的应用价值。     

明亮区域的暗原色先验算法

针对暗原色先验算法在处理含有大面积明亮区域的有雾图像时,复原图像会产生严重色彩偏移的不足,提出了一种基于像素点的透射率修正方案.在分析暗原色先验去雾原理以及复原图像色彩偏移成因的基础上,对去雾模型进行推导,使用暗通道亮度与大气光数值接近度及像素通道间数值接近度作为明亮区域判定机制,得出更具普适性的透射率求取方法.明亮区域采用容差机制纠正错误估计的透射率,非明亮区域仍采用原透射率求取方式,并首次将改进算法应用到雪天模糊图像清晰化中.实验结果表明,改进算法使去雾图像清晰自然,可有效修正色彩失真.     

多节点协作的WSN监测目标和定位算法研究

针对具体应用场合无线传感器网络监测目标的动态特性,研究一种适用于对动态特性目标进行监测和定位的方法.首先,基于目标的动态特点,进行需求分析,构建出适应于动态目标监测的WSN新型网络模型;其次,通过基础理论探究,提出一种具有容错能力的多节点协作目标监测和定位算法(MCFTMP),给出算法的具体步骤和相关性能评价指标;最后,基于MATLAB工具平台对算法的容错能力和定位性能进行仿真分析.仿真结果较好地评价了算法的正确性和有效性.     

Adaptive interpolation scheme for NURBS curves with the integration of machining dynamics

This paper develops a comprehensive interpolation scheme for non-uniform rational B-spline (NURBS) curves, which does not only simultaneously meet the requirements of both constant feedrate and chord accuracy, but also real-time integrates machining dynamics in the interpolation stage. Although the existing work in this regard has realized the importance to simultaneously consider chord error and machining dynamics, none has really incorporated these in one complete interpolation scheme. In this paper, machining dynamics is considered for three aspects: sharp corners or feedrate sensitive corners on the curves, components with high frequencies or frequencies matching machine natural ones and high jerks. A look-ahead module was developed for detecting and adaptively adjusting the feedrate at the sharp corners. By Fast Fourier Transform (FFT) analysis with a moving window in the interpolation stage identified were some special frequency components such as those containing high frequencies or with frequencies matching machine natural ones. Then, the notch filtering or time spacing method was used to eliminate these components. To more completely reduce feedrate and acceleration fluctuations, the jerk-limited algorithm was also developed. Finally, the interpolated feedrate was further smoothened with B-spline fitting method and the NURBS curves were re-interpolated with the smoothened feedrate. During the interpolation, the chord error was repeatedly checked and confined in the prescribed tolerance. Two NURBS curves were used as examples to test the feasibility of the developed interpolation scheme.     

高精度管材拉拔过程计算机模拟研究

高精度管材是一种内表面质量要求很高,内径尺寸允许偏差很小的管材。研究了高精度管材拉拔模具形式对管材生产的影响。开发了一种新型芯棒,利用MSC.MARC有限元仿真软件,模拟高精度管材的拉拔过程,分析了新型芯棒对高精度管材尺寸精度的影响规律,为研究和生产提供有效的帮助。     

根据涡流检查技术对传热管堵管进行完整性评价

主要介绍蒸汽发生器传热管通过涡流检查发现缺陷后堵管准则的确定方法,并以田湾核电站卧式蒸汽发生器为例说明堵管准则的计算流程。     

新型TC21钛合金热处理工艺参数与显微组织演变的关系研究

TC21钛合金是新型的高强韧损伤容限型钛合金，其模锻件为网篮组织，锻后热处理工艺采用双重退火工艺。本研究采用金相法、SEM等方法系统研究了TC21钛合金模锻件的锻后热处理工艺和显微组织演变规律。试验分析了TC21钛合金模锻件锻后第1次退火加热温度、第2次退火加热温度和保温时间等工艺参数条件下的初生α相数量、形状以及网篮组织形貌特征的变化规律，为TC21钛合金模锻件获得高强、高韧和损伤容限优良综合性能奠定基础。     

Conditional diagnosability and strong diagnosability of shuffle-cubes under the comparison model

The growing size of multiprocessor systems increases the vulnerability to component failures. It is crucial to locate and replace faulty processors to maintain the system's high reliability. Processor fault diagnosis is essential to the reliability of a multiprocessor system and the diagnosabilities of many well-known networks (such as hierarchical hypercubes and crossed cubes [S. Zhou, L. Lin and J.-M. Xu, Conditional fault diagnosis of hierarchical hypercubes, Int. J. Comput. Math. 89(16) (2012), pp. 2152–2164 and S. Zhou, The conditional diagnosability of crossed cubes under the comparison model, Int. J. Comput. Math. 87(15) (2010), pp. 3387–3396]) have been investigated in the literature. A system is t-diagnosable if all faulty nodes can be identified without replacement when the number of faults does not exceed t, where t is some positive integer. Furthermore, a system is strongly t-diagnosable if it is t-diagnosable and can achieve (t+1)-diagnosability except for the case where a node's neighbours are all faulty. In addition, conditional diagnosability has been widely accepted as a new measure of diagnosability by assuming that any fault-set cannot contain all neighbours of any node in a multiprocessor system. In this paper, we determine the conditional diagnosability and strong diagnosability of an n-dimensional shuffle-cube SQ_n, a variant of hypercube for multiprocessor systems, under the comparison model. We show that the conditional diagnosability of shuffle-cube SQ_n (n=4k+2 and k≥2) is 3n?9, and SQ_n is strongly n-diagnosable under the comparison model.     

Strong matching preclusion for two-dimensional torus networks

The torus network is one of the most popular interconnection networks for massively parallel computing systems. The strong matching preclusion number of a graph is the minimum number of vertices and edges whose deletion results in a graph that has neither perfect matchings nor almost perfect matchings. In this paper, we establish the strong matching preclusion number and classify all optimal solutions for the two-dimensional torus network with an odd number of vertices.